CTi Automation Logo
Loading
Home | Contact Us | Sitemap
(800) 894-0412

ABB Low Voltage

Home   >   Products   >   DCS800   >   ABB Drives

ABB Low Voltage Drives

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

DCS800-EPx Panel DC Drive

The DCS800-EPx Panel Drive is a DCS800 power module and associated system components that are mounted and wired on a sub-panel, ready to be installed into an industrial enclosure. System components include AC input fuses, DC output fuses (regen only), control transformer, AC or DC contactor, plus optional components. The drive is designed to easily replace a Reliance Electric FlexPak 3000 drive.

  • 460 Vac, factory or field convertible to 230 Vac
  • 10 to 500 HP with heavy duty overload ratings (150 pct for 60 sec.)
  • 600 HP with normal duty ratings (110 pct for 60 sec.)
  • Integral ABB AC contactor up to 300 HP; ABB DC contactor 400 to 600 HP
  • UL Listed with 65 kA SCCR
ABB DCS800-EP Panel DC Inverters (20-1000 Amps) Distributors
DCS800-EP1 & DCS800-EP2

If you are looking for ABB DCS800 Drives, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the ABB DCS800 Industrial Inverters that you are looking for at competitive prices. If you are searching for ABB DCS800 VFD Drive technical information (data-sheets) please use the datasheets or product selection guide page links.

DCS800 Power Converter Modules

The DCS800-S0x power converter module carries a NEMA TYPE OPEN (IP00) rating and must be mounted in a protective enclosure. There are seven different frame sizes, D1 through D7, graduated in terms of current and voltage.

Non-regenerative (2-Q) power converter modules are used when motor torque is always in the same direction or when significant stopping power is not required. It is not possible for a 2-Q drive to slow down an inertial load. The load will stop only due to friction, windage, or another form of load resistance.

Regenerative (4-Q) power converter modules are used when motor torque can occur in either direction. A 4-Q drive is able to start and stop an inertial load in both forward and reverse directions.

ABB DCS800 Regenerative & Non-Regenerative Power Converter Modules Distributor
DCS800 Power Converter Modules

DCS800 Enclosed Converters

The DCS800-A enclosed converters are drive modules and supporting hardware that is mounted in an enclosure, intended to power and control DC industrial machines.

DCS800-A enclosed converters are available with regenerative (4-quadrant) and non-regenerative (2-quadrant) drives in standard 6-pulse or 12-pulse configurations. The cabinets have a continuous current rating which ranges from 18 Amps up to 9800 Amps. (19,600 Amps possible with parallel units.) Supply voltage ranges from 230 to 1200 Vac.

ABB DCS800-A DC 18A to 9800/19600A Enclosed Converters Distributors
DCS800 Enclosed Converters

DCS800 Rebuild & Upgrade Kits

The DCS800-R Rebuild or Upgrade Kit from ABB allows you to update the controls on your existing DC drive and continue to utilize the existing power section. The DCS800-R Upgrade Kit is specifically designed to upgrade the controls of existing DCS500 drives.

  • For frame sizes A5, A6, A7, C2b, C3, & C4
  • For drives approx. 350 HP and above
  • Replaces existing door, control tray and keypad
ABB DCS800 Rebuild & Upgrade Kits Distributor
DCS800 Rebuild & Upgrade Kits

R-Series Fieldbus Adapter Modules

The R-series fieldbus adapter modules are flexible plug-in adapters that provide fast and simple universal connectivity to all major controllers. Universal connectivity means ABB low voltage drives connect to virtually all controller brands and communication networks, allowing users to choose the best network to meet their needs.

Network connectivity of products provides simplified interface for control and management of drives; improving quality, productivity, flexibility and scalability. Fieldbus networks also offer a cost reduction in wiring costs, compared to traditional I/O connections.

ABB's complete product portfolio of drives and fieldbus adapters make ABB drives ideal for many different industrial applications in industries such as; water & wastewater, pumps & fans, alternative energy, pulp & paper, metals, mining, cement, power, chemical, and oil and gas.

ABB RDNA-01 (+K451) DeviceNet Fieldbus Adapter Modules Distributors
Fieldbus Adapter Modules

Our industrial factory automation supplies istributors warehouse in Boise, Idaho USA stocks some ABB DC drive products enabling us to further assist you in finding the correct DC industrial drive in the USA, Canada and Mexico. Whether we have DC power converter module in stock in Boise, Idaho USA or need to get them from ABB Group; Clearwater Tech can get DCS800-EP panel drive to you fast and save you some money! It will be very helpful if you have the DCS800 enclosed converter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for rebuild kit that you are looking for in seconds. If you do not have the part numbers for upgrade kit, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Hitachi Drives

Hitachi America, Ltd., Industrial Components and Equipment Division, today announced the introduction of the SJ700B Series of Industrial AC Variable Frequency Drives, with full availability in late October. The SJ700B significantly expands on the performance, capabilities and functions of its predecessor, the L700. To reassert its technological leadership and ensure unmatched performance, Hitachi has broadened the applicability of this

Vacon Drives

The IP21/UL Type 1 and IP54/UL Type 12 units have the same footprint, and the IP54/UL Type12 units can be mounted side by side. Easy integration of IP21/UL Type 1 units to cabinets, smallest IP54/UL Type 12 saves space and investment costs. Vacon 100 HVAC is ready to communicate with an external controller via Ethernet and RS 485 protocols used in HVAC .BAC net IP and Modbus TCP via Ethernet and Modbus RTU, Metasys N2 and BAC net MSTP via RS485 are available as standard.