Entrelec

Home   >   Products   >   Entrelec   >   Terminal Blocks

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Choose the M 4/6, M 6/8, and M 10/10 Entrelec Terminal Blocks for:

• Versatility : accommodate wire sizes from 22 to 6 AWG and multiple wire, wide current range.
• Flexibility : snap onto symmetrical and asymmetrical DIN rails.
• Modularity : respond quickly to design changes.
• UL, CSA, VDE, IEC and other worldwide approvals.
• Color coded bodies for circuit identification.

If you are looking for Entrelec Terminal Blocks, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the ABB Entrelec Terminals that you are looking for at the most competitive prices possible. If you are searching for Entrelec Terminal Block technical information (data-sheets) please use the datasheets or product selection guide page links.

ABB offers the most comprehensive product range of terminal blocks which include a variety of functions like feed-through, double deck, triple deck, ground, disconnect, fuse, sensor actuator, disconnect neutral adapted to all market connection technologies.

• Screw Clamp technology remains the most popular in connection devices.
• Spring Clamp technology is a fast growing standard in screwless connection.
• IDC (insulation displacement connection) technology is the fastest and most innovative of screwless connections.

In addition to general purpose terminal blocks, ABB offers dedicated products such as Power blocks, Distribution blocks, Railway terminal blocks, Pluggable blocks, a ATEX range and other specific technologies to satisfy our specialty needs.

• Functionality through ergonomic design.
• Maximum space saving is provided by using isolated ferrules.
• Simple, quick, shield continuity.
• Numerous marking options.
• Tests points are standard and do not require additional accessories.
• ENTRELEC spring block range: convenience first.
• An all-around, all application jumper system.

• Full-cycle tool guarantees a complete connection
• No stripping of insulation required
• Completely vibration proof
• Spring action of jaw ensures permanent contact pressure
• Only needs a manual tool for connection
• No modification of wiring without the tool
• Never needs wire preparation for example, adding a ferrule
• No retightening needed, ever

DIN mounted power blocks offer the flexibility and safety associated with other Entrelec blocks:

• with 1 stud
• with 2 studs
• with 1 stud 1 wire clamp
• with 2 wire clamps

The use of some accessories may decrease the block's voltage rating.

• M 4/8.SF with blown fuse indicator equipped with 2 test sockets DIA. 2 mm/.079". Grey body.
• The microswitch must be preassembled in the fuse holder assembly (FE14.1.I or FE22.1.I). The assembly indicates fuse presence or fuse status. (Fuse with striking pin). The microswitch is equipped with a red mechanical indicator.
• Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required.
• The use of some accessories may decrease the block's voltage rating.

• The use of some accessories may decrease the block's voltage rating.
• The terminal blocks of the D 6/8.ST series are called test blocks as their main function in current transformer circuits is to test, measure, compare, change protection or metering equipment without disturbing the circuits.
• The spring loaded clamp prevents extraction of cable in case of loosening of the screw.
• ESSAILEC Blocks are used to supply power in serial or branch circuits for monitoring, counting, protection and automatic control devices, without disturbing the operating circuits.

• The monoblock connector bar ensures perfect continuity between input and distribution. Each block has 2 compression clamp terminals.
• Four pole distribution block is the optimum distribution system for a non-homogeneous line of modular equipment (interconnection of single, two, three, or four pole equipment from different manufacturers).
• Wire motor or contactors with four pole distribution block, for example, to reverse the rotation direction of a motor (phase reversal), or quickly disconnect without disturbing the manufacturing process (live intervention).

• With an overall width of 33 mm, the mini blocks offer 2 connections with 5 mm spacing and 4 connections with 10 mm spacing.
• Entrelec Mini blocks have built-in interconnection capability, therefore, the connection terminals are dedicated for connecting wires only.
• Entrelec spring connection terminal blocks comply with IEC 947-1 standard for 2.5 mm² rated wire size. Our spring terminal blocks can be connected to 4 mm² solid wires.
• A.D.O. mini blocks use the same marking technique as standard ENTRELEC terminal blocks; located on the top of the block.

• When connecting conductors of more than 16 mm², do not use the PR3 rail as it cannot carry the nominal currents.
• In order to preserve the rated voltages, a separator end section must be used, at each change of block spacing, and at each extremity of a jumper bar. When using a shield connector, please consult us.
• The terminal blocks can be used with a maximum voltage of 10% above the voltage classification according to EN 50019.
• These terminal blocks meet Standard EN 50019.

• Entrelec's MTC 6 thermocouple terminal block provides an interface for connecting thermocouple wire with virtually no loss of signal integrity.
• The interface design ensures positive wire continuity and allows selection and inventory of one terminal block for all thermocouple material.
• Other thermocouple terminal blocks are available with hardware (screws, clamps and connecting bar) which match the thermocouple material being used. This requires inventory of many different terminal block types.