Clearwater Tech Logo
Home | Contact Us
(844) 331-9372

ABB Low Voltage

Home   >   Products   >   Thomas & Betts   >   Wire Duct, Wire Ties & Spiral Wrap

ABB Low Voltage Controls

(844) 331-9372       (888) 723-4773 (Fax)

Q-Duct Wiring Duct

ABB offers Q-Duct, a wide variety of wire duct and accessories. Wire duct bases are available in six nominal widths - 1/2" to 6" - and six nominal heights - 5/8" to 4". The top profile of the wire duct makes the covers easier to install and remove. The rounded shape of the ribs prevents abrasions to both the installer's hands and wires.

The score line at the base of each rib enables a clean break to create openings for running wires. ABB wire duct is used in applications with rated voltages up to 1000 VAC and 1500 VDC.

ABB Q-Duct Wiring Duct Distributors
Q-Duct Wiring Duct

If you are looking for ABB Wire Duct, Wire Ties & Spiral Wrap, please call us on (844) 331-9372 or email us at we will do our best to help you find the ABB Wire Duct that you are looking for at the most competitive prices possible. If you are searching for ABB Wire Ties technical information (data-sheets) please use the datasheets or product selection guide page links.

Q-Flex Flexible Wiring Duct

  • RAL 7040 Gray
  • Plastic, insulating, shock-proof, self-extinguishing material in compliance with UL 94 V2 Standard and resistant to permanent temperature of 80°C and peaks up to 110°C in compliance with IEC 216 Standards
  • Resistant to acids, oils and greases
  • Ribs alternate and angle slightly inwards to make it easier to insert and extract cables
  • No covers so cables can be constantly monitored
  • Possibility of fastening using screws and rivets or bi-adhesive tape which sticks strongly to the steel (premounted)
  • Suitable for connecting panels and doors with compass-opening mechanisms and in general for applications where cabling is subject to bending and twisting
  • Standard 500mm length
ABB Q-Flex Flexible Wiring Duct Distributor

Q-Flex Flexible Wiring Duct

Q-Wrap Spiral Wrap

  • Options available:
    • Translucent polyethylene
    • Self-extinguishing polyethylene
  • For forming of bundles and grouping of wires
  • Mechanical protection of cables
  • Flexible connections between panel and door
ABB Q-Wrap Spiral Wraps Distributors
Q-Wrap Spiral Wrap

Q-Ties Tie Wraps

  • Easy to install and remove
  • Provides protection to the wire bundle
  • Available in white and black
  • Fast and economical grouping of wire bundles
  • Joining groups of wires and/or tubing
  • Flexible connections between door and panel
ABB Q-Ties Tie Wrap Distributor
Q-Ties Tie Wraps

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some ABB Thomas & Betts products enabling us to further assist you in finding the correct ABB Spiral Wrap in the USA, Canada and Mexico. Whether we have ABB Tie Wraps in stock in Boise, Idaho USA or need to get them from ABB Low Voltage; Clearwater Tech can get Q-Duct Wiring Duct to you fast and save you some money! It will be very helpful if you have the ABB Q-Flex Flexible Wiring Duct part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Q-Wrap Spiral Wrap that you are looking for in seconds. If you do not have the part numbers for ABB Q-Ties Tie Wraps, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

NK Technologies Sensors

A Fault Current Transducer can send a signal to a panel meter with alarm contacts or a controller. As an example, the alarm points can be configured so one alarm is initiated when fault current reaches 30 mA, and another when it rises above 70 mA. Ground fault protection is required in many applications, and NK Technologies has a sensor that can be coupled with your control system to provide this needed alarm or circuit disconnection.

Hammond Wireway

When Joining a Wireway section or fitting to an enclosure be sure to order a box connector. When joining two wireway sections, or joining a wireway section to a fitting, a flat sealing plate is required at each junction; necessary kits are supplied with each section and fitting. When joining a lay-in wireway section or fitting to a closure plate, a box connector, or cut-off fitting, an angle sealing plate is required at each junction.