Clearwater Tech Logo
Loading
Home | Contact Us |
(800) 894-0412

Encoder Products Company

Home   >   Products   >   BECO   >   Accessories

Accu-Coder Encoders

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Encoder Products Company (EPC) offers two types of measuring wheels in both english and metric circumferences. The first type, Faced Measuring Wheels, has a wide contact surface with a variety of faced coatings, one of which will be suitable for nearly every specialized application. The second, Rubber Insert Measuring Wheels, uses a replaceable rubber insert, or "spare tire", that is easier to set up and maintain, and fits most general-purpose requirements.

Accu-Coder Measuring Wheels Distributors
Measuring Wheels

If you are looking for Accu-Coder Accessories, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find the Accu-Coder Encoder Accessories that you are looking for at the most competitive prices possible. If you are searching for Encoder Products Company (EPC) products technical information (data-sheets) please use the datasheets or product selection guide page links.

  • Tru-Trac Mounting Bracket
  • Uni-Bracket Kit
  • Mounting Plate Kit
  • Foot Mount Bracket #1
  • Foot Mount Bracket #2
  • Single Pivot Bracket
  • Double Pivot Bracket
  • Spring Loaded Pivot Mounting Bracket
Accu-Coder Mounting Brackets Distributor
Mounting Brackets

50" Linear Cable Adaptor for standard or industrial Cube housings. Mounts directly over the shaft in a few easy steps. Five inches of cable movement is equal to one revolution of the encoder.

Accu-Coder LCA Linear Cable Adaptors Distributors
Linear Cable Adaptors

The all-metal Uni-Cover provides additional protection for Accu-Coder models 121, 225, 260, 755A, 702, 775, 776, and 960 mounted on NEMA 4.5" AK motors with a 5.875" bolt pattern. (includes bolts & washers)

Accu-Coder Uni-Cover Kit Protective Covers Distributor
Protective Covers

Encoder Power Supply

A clean source of dedicated power for your encoder is an important factor when designing a reliable system. These are small, easily mounted DIN rail power supplies specifically chosen to power encoders.

Designed for space efficiency, these compact power supplies are available in 5, 12, or 24 VDC. Easy to see LED indicators show the power supply is working properly. Screw type terminals easily accommodate wires from AWG 24 to 14. The shock proof housing is both UL and CE approved. These supplies have been tested to work with all our Accu-Coders.

Accu-Coder Encoder Power Supplies Distributors
Power Supplies

RX/TX Repeater

RX/TX Products were designed to provide solutions for customers who require signals to be transmitted long distances, signals incompatible with interfacing equipment, or signals needing to be duplicated for different equipment.

The RX/TX Repeater retransmits signals from a encoder ouput for driving signals over a longer distance with reduced noise and distortion free waveforms.

The RX/TX Converter converts a Push-Pull or NPN encoder output to an RS422 compatible differential Line Driver output or vice-versa.

The RX/TX Splitter takes one encoder input and produces two seperate output channels.

Accu-Coder RX TX Repeaters Converters Splitters Distributor
RX/TX Repeaters
  • Models 775 & 776 - Santoprene rubber flex mount and accessories
  • Model 225 - Flex Arm Kit
  • Models 260 & 702 - Flexible Mounting Arm
  • Model 260 - SF Mounting Kit 1.811" (46 mm) BC
  • Model 260 - SD Mounting Kit 1.575" (40 mm) BC
Accu-Coder Anti-Rotation Mounts Distributors
Anti-Rotation Mounts
  • 6-pin MS type (MS3106A14S-6S-619)
  • 7-pin MS type (MS3106A16S-1S-618)
  • 10-pin MS type (MS3106A18-1S-618)
  • 9-pin D-sub (AIM 40-9709S)
  • 10-pin Bayonet
  • 12-pin
  • 16-pin
  • 16-pin, CE
  • 19-pin (KPT06F14-19S)
Accu-Coder Cables Connectors Distributor
Cables & Connectors

Magnetic Couplings

Problem: You've got a machine with a 1.25" diameter shaft with only 1/8" of shaft length accessible. The thru-bore rotary encoder you're trying to install requires at least 0.75" shaft engagement. You could drill and tap the machine shaft, then fabricate and install a stub shaft. But, this can be costly and time consuming.

Solution: The Magnetic Coupling from Encoder Products Company.

Accu-Coder Magnetic/Shaft Couplings Distributors

Couplings
  • NEMA Size 34, 6 mm coupling
  • NEMA Size 23, 6 mm coupling
  • NEMA Size 34, 1/4" coupling
  • NEMA Size 23, 1/4" coupling
  • NEMA Size 34, 3/8" coupling
  • NEMA Size 23, 3/8" coupling
  • Servo 755A
  • Standard Cube
  • 5PY Adaptor for Size 25 Series
  • 5PY Adaptor for 2.25" Standard Cube Housing
  • Cube Mounting Adaptor for Size 20 Series
  • Santoprene rubber flex mount and accessories
Accu-Coder Hubs Flanges Distributor
Hubs & Flanges

RX/TXD

EPC is known for offering a well-rounded line of rotary encoders (and in the case of the Cube series, well-squared.). But, in addition, we also offer a plethora of encoder accessories, including the RX/TX line of signal conditioners, transmitters and receivers. EPC now introduces the next generation RX/TX product with the release of the all new RX/TXD.

This lightweight DIN rail mountable unit, Line Driver and Line Receiver, comes in a stylish green PC/ABS self-extinguishing material blend. Configurable as a level changer, line repeater, splitter or encoder tester. The RX/TXD will accept TTL, RS422, RS485, PP, NPN, NPN OC, or, PNP encoder inputs at 5V, or HTL, PP, NPN, NPN OC & PNP at 6-28V. It will provide up to 3 outputs in any combination of TTL, RS422, RS485, PP, NPN or PNP, at 5V, or, HTL, PP, NPN or PNP, at 6-28V. A series of LEDs on the front panel indicates power and signal presence. Connections are made via the easily accessible screw terminals as standard. This device may be used as both a Line Driver and Line Receiver.

Accu-Coder RX/TXD Signal Conditioners, Transmitters & Receivers Distributors
RX/TXD Encoder Interface

Whether we have Accu-Coder measuring wheels in stock in Boise, Idaho or need to ship direct from Encoder Products Company to any USA cities; Clearwater Tech can get Accu-Coder mounting brackets to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Accu-Coder products enabling us to further assist you in finding the correct Accu-Coder protective covers in the USA, Canada, or Mexico. It will be very helpful if you have the Accu-Coder cables & connectors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Accucoder couplings that you are looking for in seconds. If you do not have the part numbers for Accu-Coder hubs & flanges, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Kubler Linear Systems

The Non-Contact Incremental magnetic linear measurement system Limes LI20 / B1 - made up of the sensor head LI20 and of the magnetic band B1 - reaches a resolution up to 10 µm with a maximum distance of 1 mm between the sensor and the band. For outdoor use with extremely sturdy aluminium housing and stainless-steel cover, wide temperature range as well as a UVresistant cable. IP68 / IP69k protection, special encapsulation

Weidmuller DIN Rail

The SMD-Bus Contact Block can be reflow soldered so that it can be completely automatically processed during the component assembly. The resistant, gold-plated contact surfaces ensure a permanent and reliable contact for all housing widths. The DIN rail bus can replace the tedious individual wiring process with a flexible and uninterrupted system solution. As a result, the wiring overhead and the error rate