Clearwater Tech Logo
Loading
Home | Contact Us |
(800) 894-0412

Encoder Products Company

Home   >   Products   >   Accucoder   >   Shaft   >   Incremental Encoders

Accu-Coder Encoders

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Models 711-720 (Classic Cubes)

The new E-Cube version of the Cube Series Accu-Coder Shaft incremental encoders increase critical performance specifications for the most popular resolutions. The E-Cube encoder features advanced Opto ASIC circuitry, 125 kHz frequency response, select CPR to 2500, 3 arc minutes accuracy, 85 C standard operating temperature and optional 100 C operation at 5-24 VDC. The single chip design of the E-Cube Accu-Coder Incremental Encoder eliminates many board level components, increasing the reliability of an already dependable and durable industrial encoder. See specifications for available resolutions. The Standard Cube version remains available and covers all resolutions not offered in the E-Cube. The Cube Series housing styles are available in both the Basic Cube Series Models and the Speciality Cube Series Models. Optional 5PY Adaptor (175443) allows any Standard Cube Housing to be interchanged with any 5PY tach generator.

Accu-Coder Cube Series Incremental Shaft Encoders Distributors
Cube Series

If you are looking for Accu-Coder Encoders, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find the Accu-Coder shaft incremental encoders that you are looking for at the most competitive prices possible. If you are searching for Encoder Products Company (EPC) Incremental Shaft Encoder technical information (data-sheets) please use the datasheets or product selection guide page links.

Model 15S (1.5" Diameter)

The Model 15S Accu-Coder offers a high performance feedback solution in a low profile package, making the Model 15S ideal for commercial and light-duty industrial applications. This industry standard Size 15 (1.5" diameter) encoder features a precision bearing set, sealing available to IP64, a durable 1/4" or 6 mm stainless steel shaft, and a selection of servo, flange, and face mount options.

The Model 15S may also be specified with features such as extended operating temperatures from -20° C to +120° C, or up to 12 pole commutation for brushless motor control. The Model 15S features EPC's Opto-ASIC circuitry for a clean, reliable signal. Its durable, yet economical design makes it an ideal encoder for high precision OEM applications. Common Applications include Servo Motor Control, Robotics, Medical Diagnostic Equipment, Specialty Assembly Machines, Digital Plotters, Printers & Typesetting Equipment.

Accu-Coder Model 15S Incremental Shaft Encoders Distributor
Model 15S

Accu-Coder 15S series replaces encoders from Sumtak, Koyo, Automation Direct, Tamagawa, Nemicon, Baumer and more. Choose from a full complement of disc resolutions, output options, 9 mounting faces, IP64 sealing, commutation and up to 120C temp rating. The 15S is a versatile problem solver. Also available with in-line M12 connector.

Model 755A (1.5" Diameter)

Model 755A Size 15 Accu-Coder is ideal for applications requiring a small, high precision, high performance encoder. Being approximately 1.5" in diameter and 1.5" long it will fit where many encoders cannot. Designed with all metal construction and shielded ball bearings, it will provide years of trouble-free use.

The standard servo mount S version is available with a variety of shaft sizes and lengths. Three additional servo style mounts S1, S2, S3 are also available.

The optional flange mounting MF is ideal for applications requiring a bolt-on, high precision encoder. With its high reliability and quick delivery, the Model 755A encoder is the perfect replacement encoder for less reliable encoders of this size.

Accu-Coder Model 755A Incremental Shaft Encoders Distributors
Model 755A

Model 702 (2" Diameter)

The Model 702 Size 20 Accu-Coder is a heavy duty, extremely rugged, reliable, yet compact industry standard 2" diameter encoder designed for harsh factory and plant floor environments. The double shielded ball bearings are rated at 80 lb maximum axial and radial shaft loading to ensure a long operating life.

Made to withstand the harsh effects of the real world, both the flange and servo models are rated NEMA 13 & 4/IP66 with the optional heavy duty shaft seal.

With a variety of mounting options in both the flange and servo models, the Model 702 is ideal for both new applications and replacements. If you need an encoder that won't let you down, the Model 702 is it.

Accu-Coder Model 702 Incremental Shaft Encoder Distributor
Model 702

Model 725 (2.5" Diameter)

Model 725 Size 25 Accu-Coder optical shaft encoder is specifically designed for the challenges of an industrial environment. But don't let its tough, industrial package fool you; it still has the performance to reach resolutions up to 30,000 cycles per revolution.

The Model 725 is available with both flange and servo mounting options, along with two distinctive 2.5" diameter housing styles. The rugged Standard Housing isolates the internal electronics from the shock and stress of the outer environment. The extra heavy-duty Industrial Housing features a fully isolated internal encoder unit that prolongs bearing life by using a flexible mount to protect the encoder from severe axial and radial shaft loading.

Refer to technical bulletin TB-118 to see why this is the most robust Size 25 unit available.

Accu-Coder Model 725 Incremental Shaft Encoders Distributors
Model 725

Model 758 (58 millimeter Diameter)

The Model 758 Size 58 Accu-Coder is a heavy duty, extremely rugged, reliable, yet compact European standard 58 millimeter diameter encoder designed for harsh factory and plant floor environments.

Shaft loading is no problem for the double-shielded ball bearings; their 80 lb load rating ensures a long operating life. With the optional heavy-duty shaft seal, the Model 758 is rated at NEMA 4 & 13/IP66.

Two European standard mounting options are available: Clamping Flange (20 type) or Synchro Flange (26 type). The Model 758 is the perfect replacement encoder for units requiring the European mount.

Accu-Coder Model 758 Incremental Shaft Encoders Distributor
Model 758

Model 25SP

The Model 25SP Programmable Size 25 Accu-CoderPro™ shaft encoder is specifically designed for the challenges of an industrial environment. But don't let the tough exterior fool you - contained within the rugged, industrial housing is an advanced set of electronics that allow the encoder to be programmed to your exact application needs. Using EPC's optional programming module, users may select the output type, 32 different waveforms, and any resolution from 1 to 65,536 CPR - that's 262,144 counts using 4x quadrature counting.

These programming features allow a single encoder to be configured for multiple applications, enabling one encoder to replace many different part numbers - and that provides cost savings on inventory and down-time replacement. The 25SP can also be configured and shipped with specs pre-programmed, with no on-site programming needed. The Model 25SP Accu-CoderPro™ comes standard with dual bearings rated 80lbs axial or radial, and may be specified with up to IP67 sealing.

Accu-Coder Model 25SP Programmable Incremental Shaft Encoders Distributors

Whether we have Accu-Coder incremental shaft encoders in stock in Boise, Idaho or need to ship direct from Encoder Products Company to any USA cities; Clearwater Tech can get Accu-Coder encoders to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Accu-Coder products enabling us to further assist you in finding the correct Accu-Coder encoders in the USA, Canada, or Mexico. It will be very helpful if you have the Accu-Coder incremental shaft encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Accucoder encoders that you are looking for in seconds. If you do not have the part numbers for Accu-Coder incremental shaft encoders, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Kubler Encoders

Sendix Base KIS40/KIH40 incremental encoders with optical sensor technology have been designed for highest costeffectiveness. They are available with a resolution of up to 2500 pulses per revolution. They are particularly suitable for tight mounting spaces and small machines and appliances. The compact incremental encoders type 3610/3620 with optical sensor technology are available with a resolution of up to 2500 ppr.

SUNX Sensors

The User Interface of the sensor has been enhanced to provide a dual digital display and a large adjuster. The display shows the incident light intensity and the threshold value simultaneously, which improves configuration and maintenance procedures. Also, the display can be flipped 180 degrees or shut off completely to save power. The adjuster allows several advanced features such as R.S.S., or rotation speed sensitivity,