ABB CP-E Series Power Supplies

ABB Controls CP-E series power supplies includes various versions with output voltages from 5 V DC up to 48 V DC at output currents from 0.625 A to 3 A. Their high efficiency of up to 89% and their low power dissipation and heating allow the operation of these units without forced cooling. Despite the expansions in functionality it was possible to reduce the number of different types. Of course, all CP-E series ABB Power Supplies are approved according to all world-wide applicable standards (cULus, IEC/EN 60950, etc.) and have the CE and the C-TICK sign applied.

• Output voltage 5 V, 12 V, 24 V, 48 V DC
• Adjustable output voltages & Integrated input fuse
• Output current 0.625A, 0.75A, 1.25A, 2.5A, 3A
• Power range 18 W, 30 W, 60 W & Status LED "OUTPUT OK"
• Autorange input 100 to 240 V AC range (85 to 265 V AC, 90 to 375 V DC)
• Low power dissipation and low heating
• Free convection cooling (no forced cooling with ventilators)
• Working temperature range -10 to +70°C
• Open-circuit, overload and short-circuit stable, automatic recovery
• U/I characteristic curve (fold-forward behaviour at overload - no shutdown) for devices > 18 W & High efficiency of up to 87 to 89%
• Redundancy unit CP-A RU offering true redundancy
• DC OK output (transistor) for 24 V (> 18 W)

IDEC Solid State Relays RSC Series

RSC relays have technology to dissipate the heat away from main switching components, making them a great buy. Other relays may require you to add your own heat sink or deal with a burned out product, but the new RSC relays from IDEC have a built-in heat sink making them easy to install and get running. The heat sink, along with an epoxy-free design, eliminates the need to de-rate your relay and also increases its life expectancy. And an LED status indicator makes sure you can see it working.

The slim design of IDEC RSC Relays provides a compact unit for DIN Rail or panel mounting without wasting space. 20A and 30A current ranges are 22.5mm, while the relays with 45A current are 45mm. All RSC relays are UL recognized, CE marked, as well as being lead-free and RoHS compliant.

• Choice of 20A, 30A and 45A models
• Slim design allows for compact DIN rail or panel mounting
• Built-in heat sink & LED indicator
• Epoxy-free design and improved thermal impedance
• Finger-safe Terminals & Zero voltage switching
• UL recognized, CSA Certifi ed, TUV Approved, CE Marked
• Lead-free & RoHS, EMC (Level 3) & IEC 62314 compliant

Weidmuller Circuit Breakers

Weidmuller's DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short circuits. Each circuit breaker has the ability to be reset without the need to change components. All circuit breakers are available with an assortment of jumpers and marking tags.

Weidmuller Circuit Breakers in the 9926 Series are UL 489 Listed and CSA Certified as branch rated protection devices under CSA 22.2 No. 5-02. The hydraulic magnetic trip mechanism offers 10,000A of interrupting capacity in 120V and 240V, 50/60Hz applications.

• Single pole and double pole versions
• Higher current ratings made of 2 or 3 poles in parallel
• KM trip curve for general purpose applications
• 120/240 VAC, 50/60 Hz
• Up to 25A
• Just 13 mm wide
• Mounts on 35mm DIN-rail
• UL 489 listed, CSA C22.2 No. 5-02, CE