Clearwater Tech Logo
Loading
Home | Contact Us |
(800) 894-0412

Baldor Reliance

Home   >   Products   >   Baldor AC Motors

Baldor

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Premium Efficient

Super-E Motors are designed to conserve energy over extended time periods. These premium efficiency designs are available in both Totally Enclosed Fan Cooled (TEFC) and Open Drip Proof (ODP) construction.

All three phase motors are Inverter Ready per NEMA Standard MG1, Part 31.4.4.2. This means the motors in 230 and 460 volts meet NEMA's corona inception voltage requirements, under this Standard, and can withstand peak voltages of up to 1600 volts. Motors having premium efficiency are also available in single phase designs.

Baldor Premium Efficient Super-E AC Motors Distributors
Premium Efficient Super-E

If you are looking for Baldor AC Motors, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find the Baldor Premium Efficient AC motor that you are looking for at the most competitive prices possible. If you are searching for Baldor Single Phase AC motor technical information (data-sheets) please use the datasheets or product selection guide page links.

Single Phase

In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC and ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless.

These are also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors where energy savings is desired.

Baldor Single Phase TEFC & ODP 1/12 Hp to 15 Hp AC Motor Distributor
Single Phase

General Purpose

Baldor's extensive line of General Purpose motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP.

Designed for "general purpose" use means that these motors can be used in applications which include compressors, pumps, fans, conveyors, material handling, machine tools and many others.

Baldor Open Drip-Proof & TEFC Single-Phase & Three-Phase General Purpose Motors Distributors
General Purpose

Severe Duty

Severe Duty motors are available from 1 HP to 700 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions.

A few typical applications which might require these types of motors include petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, rock crushers, and chemical plants.

Baldor Severe Duty AC Motor Distributor
Severe Duty

Washdown Duty

Baldor's Washdown Duty Motors are available from stock in single and three phase AC and in DC designs. Horsepowers range from 1/2 to 20. Designs include motors having an electostatically applied epoxy finish, paint free with major components in 300 series stainless steel, and all stainless steel.

Applications include food processing, packaging, pharmaceuticals, or applications where motors are regularly exposed to high pressure wash down.

Baldor Washdown Duty AC Motors Distributors
Washdown Duty

Explosion Proof

Baldor's Explosion-proof motors are ideal for a wide variety of applications where hazardous fumes or dust may be present. The motors are available in three phase and single phase with ratings, in stock, from 1/4 HP through 300 HP.

Designs available include standard foot mounted, C face with base and C face less base, 60 Hz and 50 Hz, Jet Pump motors, and Inverter Drive motors.

Baldor Explosion Proof AC Motor Distributor
Explosion Proof

Pump

Our pump line of motors includes single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors. The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosion proof ratings.

Applications for these run the gamut from swimming pool pumps to medium and high thrust in-line pumps used in water treatment plants. Horse powers range in size from 1/3 through 75 HP.

Baldor Pump AC Motors Distributors
Pump

Light Industrial/Commercial

Baldor's new Light Industrial / Commercial Motor line offers many ratings designed for applications with low to medium starting torque requirements. The Baldor Light Industrial / Commercial Motor line brings Baldor's reputation for high quality designs to commercial applications with a cost-effective offering. This definite purpose product line is designed for certain applications requiring NEMA 48 and 56 motors rated between 1/4 and 1 1/2 HP, in both single and three phase ratings. Typical applications include: Jet Pump, Heating and Cooling, Ventilation, Air Conditioning, Blowers, Direct Drive Fans, Condenser Fans, and Pedestal Fans.

Baldor Light Industrial/Commercial AC Motor Distributor
Light Industrial/Commercial

HVAC

Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. The motors range in size from 1/4 HP to 100 HP and include heavy duty industrial designs as well as designs for commercial applications.

These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers. Also included are motors designed especially for use with variable torque electronic controls that are used to conserve electricity.

Baldor HVAC AC Motors Distributors
HVAC

Farm Duty

These motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers.

General purpose motors are also available in both single and three phase, TEFC and ODP construction. For those loads that are hard to start and require extra torque, Baldor is the only motor manufacturer that stocks Repulsion-Start Induction Run motors, in sizes from 2 HP to 10 HP.

Baldor Farm Duty AC Motor Distributor
Farm Duty

Definite Purpose

The Definite Purpose family of motors captures a host of variety demanded by the marketplace. These motors include TEFC and ODP Two-speed motors, as well as single phase Pressure Washer motors. This group of specialty motors includes Arbor Saw to Woodworking, Pre-1952 NEMA motors to SAE Hydraulic Pump motors. An extensive line of TEFC and ODP F-2 motors are available as well in 1 Hp through 60 Hp. The Automotive Approved motors, approved by major US automobile manufacturers, are available in cast iron designs and meet all requirements for sound power levels. A broad line of Design D Oil Field Pump motors, requiring high torque and high slip, are available in 3 Hp through 150 Hp.

Baldor Definite Purpose AC Motors Distributors
Definite Purpose

Unit Handling

Baldor's line of Unit handling motors are designed for a wide variety of applications in baggage handling, conveyors, packaging equipment, machine tools, hoists, elevators and door openers. These motors are available from stock in ratings of HP thru 10HP (56 thru 215T frames) with or without Dodge D-Series brakes.

Features include an oversized top mounted conduit box on 56 & 140T frames that provide easy access for making connections. Footed frames include slotted feet for easy mounting.

Baldor Unit Handling AC Motor Distributor
Unit Handling

Brakemotor

Baldor's line of brake motors are available in totally enclosed fan cooled, open drip proof, or explosion proof designs, in either single or three phase. Stock ratings are available from 1/4 HP through 30 HP.

These motors use a mechanical spring set brake with a manual release. Brake motors may be used on machine tools, conveyors, door operators, speed reducers, hoists, or any application requiring quick stops and positive holds.

Baldor Brake AC Motors Distributors
Brakemotors

200 & 575 Volt

Some general purpose applications require a motor that runs on 200 volt power. These 200 volt motors are stocked from 1 Hp to 50 Hp in TEFC, and 1 Hp to 100 Hp in ODP. Also available is an extensive line of 575 volt motors.

The 575 volt motors are available in general purpose TEFC and ODP, Washdown, Severe Duty, IEEE-841, Explosion Proof, and Close-Coupled pump designs, in a variety of mounting configurations.

Baldor 200 & 575 Volt AC Motor Distributor
200 & 575 Volt

IEC Frame

Baldor's line of IEC frame motors are available from D63 through D315M, stocked in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that have failed on imported machinery. Motor construction meets IP54 and includes motors with B3 base mounting, B5 flange mounting, or B14 face mounting.

Stock motors range in size from .18 kW to 132 kW. Typical applications for this product include pumps, fans, conveyors, machine tools, gear reducers and any other jobs that require IEC frames.

Baldor IEC Frame AC Motors Distributors
IEC Frame

50 Hertz

Some applications require NEMA motors which operate on true 50 Hz power.

Where this 50 Hz power is all that is available, these NEMA motors are designed to be used at rated voltages with tolerance of ± 15% on voltage.

Baldor 50 Hertz AC Motor Distributor
50 Hertz

Inverter/Vector

Inverter/Vector motors are equipped with a superior insulation system designed to comply with NEMA MG-1 part 31 for inverter power. The motors available from stock range from 1/3 Hp to 1000 Hp. Designed for a variety of industrial applications where full torque is needed from base speed down to zero speed. Applications include conveyors, pumps, fans, metal processing, compressors, test stands, material handling, packaging equipment, printing presses, and others requiring exact speeds and positioning.

Baldor Inverter/Vector AC Motors & Controls Distributors
Inverter/Vector

Whether we have Super-E motors in stock in Boise Idaho or need to ship direct from ABB Baldor to any USA cities; Clearwater Tech can get 1-phase motor to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some general purpose motors enabling us to further assist you in finding the correct severe duty motor in the USA, Canada, or Mexico. It will be very helpful if you have the washdown duty motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for explosion proof motor that you are looking for in seconds. If you do not have the part numbers for pump motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

ABB Drives

Brake Chopper is included as standard in the two smallest frame sizes R2 and R3 as well as in the 690V R4 frame. In other frames the chopper is a built in option. Other built in options include EMC filters and extension modules for additional I/O, fieldbus and pulse encoder interface modules. The ACS800-U1 offers all that you need in a single, extremely small, wall-mounted package making it a compact and complete drive.

Toshiba Drives

Toshiba legacy products are an integral part of our rich history and long line of products. Since many of these products are still in operation, we know the importance and value of providing technical information and support for these products. Our main priority is to provide superior products and services to our customers, and we are proud that our legacy products continue to be an important part of our business.