Banner EZ-LIGHT Actuators Distributors

August 29, 2011

piconet Modular Fieldbus

piconet, The Series of Miniaturised Fieldbus Modules meets the highest industrial standards, even though the stations are extremely small. The fully encapsulated modules may be integrated directly in the machine or the system without additional precautionary measures. Whether as stand-alone or coupling module with fibre-optic subnet and inexpensive extension modules: the flexible piconet modules provide almost unlimited application possibilities.

Weidmuller Actuators

Weidmuller's Plastic Coupling Nuts are resistant to corrosion, ensuring safe and reliable connections in wash-down, high humidity and chemically aggressive environments. They can help optimize machine up time through decreased product failures and maintenance time. SAI M12 connecting cables with plastic coupling nuts are water- and dust-tight. Their IP67 rating and chemical resistance make them suitable for applications

Banner Engineering
Home > Products > Banner > Vision > Actuators

	(800) 894-0412 (888) 723-4773 (Fax) info@clrwtr.com
K30 Series	The K30 is a rugged, miniaturized, and easy-to-install pick-to-light solution to aid in error-proofing and lean manufacturing. Illuminated dome provides an easy-to-see green job light; some models also light red for alternate operation Waterproof IP65 construction for washdown environments Immune to EMI and RFI interference 12 to 30V dc operation Cabled and Quick Disconnect models available
If you are looking for Banner Actuators, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner PVA Pick-to-Lights that you are looking for at the most competitive prices possible. If you are searching for Banner PVD Pick-to-Lights technical information (data-sheets) please use the datasheets product selection guide page links.
K50 & K80 Series	Compact, single-point devices for error-proofing of bin-picking operations. Rated to IP69K depending on installation. Rugged, cost-effective and easy-to-install solutions for error-proofing and parts verification applications Compact devices are completely self-contained - no controller needed Illuminated dome provides a big, easy-to-see green job light; some models also light red for alternate operation Push-button and passive-actuation models available Fully encapsulated IP67 construction - ideal for use in abusive environments; rated to IP69K, depending on installation; see specifications Immune to ambient light, EMI and RFI interference AS-i module compatible 12 to 30V dc operation
K50L Series	Three-color indicator light with an independent push button contact that can function without any power to the device or electrical circuits for control. Three sourcing inputs control the green, yellow and red indicator lights Push button is mapped to a dry contact output which is designed to work with SureCross FlexPower Devices 18 to 30V dc operation Ideal for use in abusive environments, featuring rugged, fully encapsulated construction Cabled and Euro Quick Disconnect models available
K50 & K80 Specialty Series	Compact, single-point devices for error-proofing of bin-picking operations. Rugged, cost-effective and easy-to-install solutions for error-proofing and parts verification applications Compact devices are completely self-contained - no controller needed Illuminated dome provides a big, easy-to-see green job light; some models also light red for alternate operation Push-button and passive-actuation models available Fully encapsulated IP67 construction - ideal for use in abusive environments; rated to IP69K, depending on installation; see specifications Immune to ambient light, EMI and RFI interference AS-i module compatible 12 to 30V dc operation
PVA Series	Two-component light screen for part-pick verification. Provides a reliable error-proofing system for assembly operations Indicates to an assembler which items to pick for a given operation, and the order in which to pick them Uses asynchronous emitter and receiver and requires no controller Offers 12 to 30V dc supply voltage with either NPN or PNP output Provides DIP-switch adjustment of light/dark operate, solid/flashing job light indicator, A/B frequency and gate polarity for activating job light Offered in four lengths-100 mm, 225 mm, 300 mm, 375 mm-to fit common bin sizes Accommodates 2 meter separation distance Incorporates highly visible indicator LEDs
PVD Series	One-piece light sensor for part assembly and error proofing. Patent-pending, easy-to-use sensor is suited to many part assembly, pick-to-light, and error-proofing applications. One-piece self-contained sensor requires no controller. Sensor automatically operates in either diffuse or retroflective mode, depending on the application. Supply voltage is 12 to 30V dc. Output is NPN or PNP selectable using DIP switches. Setup and adjustment are automated. Wide beam pattern simplifies alignment. Large green job lights initiate users action; job lights turn red to indicate errors. Two lengths fit existing bin sizes and configurations.
OTB & LTB Series	Ergonomic optical switches with either momentary (OTB) or alternate-action output (LTB). OPTO-TOUCH Optical Touch Buttons are zero-force ergonomic replacements for mechanical push buttons. OTB models are momentary-action touch buttons with electromechanical relay or solid-state outputs. LTB models are alternate-action touch buttons with electromechanical relay outputs.
STB Series	STB touch-activated photoelectric switches are self-checking to ensure reliability. Because they require no physical pressure to operate, they prevent stress on hands and wrists. Replaces capacitive touch switches and mechanical push buttons Features illuminated base (to provide a bright, easy-to-see job light); solid, flashing or multiple color models available Offers choice of models with red, green or blue job light Require no physical pressure to operate, eliminating hand, wrist and arm stresses associated with repeated switch operation Offers a cost-effective and easy-to-install pick-to-light solution for areas that cannot accommodate a light screen Cuts through heavy airborne contamination to function in almost any environment Withstands exposure to a variety of chemicals, depending on model
VTB Series	Ultra-bright optical touch buttons for indicating bin-picking sequences Provides highest level of safety for two-hand control input devices, per independent certification tests Provides redundant microprocessor and optical path Responds to a finger blocking light rather than to pressure Features ergonomic design to prevent repetitive motion stress Includes yellow field cover to prevent unintended switching Immune to ambient light, EMI and RFI Available with e/m relays rated for 1 amp switch capacity or solid-state outputs rated for 150 mA Withstands exposure to a variety of chemicals, depending on model
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner Engineering products enabling us to further assist you in finding the correct K30 Pick-To-Light EZ-LIGHT for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering products in stock than any other Banner Engineering distributor in the Pacific Northwest region. Whether we have K50 Pick-to-Light EZ-LIGHT in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get K50L Independent Push Button Contact to you fast and save money! It will be very helpful if you have the K80 Pick-to-Light EZ-LIGHT part numbers ready, then our sales representatives can provide you with a pricing and availability quote for STB Self-Checking Touch Buttons that you are looking for in seconds. If you do not have the part numbers for OTB & LTB OPTO-TOUCH Optical Touch Buttons, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible. Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).