April 28, 2010
SUNX Sensors
The Connector Connection Type
eliminates the extra work of soldering and insulation processing. In addition, the connector used is a commercially-available
multi-purpose connector which is also currently used by the DP-100 series of digital pressure sensors. The connector is built
into the sensor. This greatly reduces the amount of space taken up compared to previous SUNX micro sensor models.
|
SUNX Sensors
The NA1-5/PK5 Series
of bin picking sensors is perfect for preventing errors due to incorrect part picking during assembly or packaging operations.
Human error is reduced by incorporating a large, bright LED indicator bar that can be configured to illuminate or even blink to
show the operator which bin they are supposed to use. Long operation is possible at up to 1.2m; and at only 10mm thick,
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
Sealed Series |
Sealed Linear Array IP68 Lighting for use with Vision Systems in Washdown Environments
- Four high-intensity, visible wavelengths, plus IR
- Rugged, waterproof housing, rated IEC IP68
- The following array lengths are available: 290 mm (11.4"), 435 mm (17.7") & 580 mm (22.8")
- High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4 models) or
via hookup & Optically isolated strobe signal
- Selectable Active High or Active Low strobe
- Available with 316 stainless steel or nickel-plated aluminum housing
- LEDs directly illuminate target & Lens angle of 6.5°
- Three window materials from which to choose: clear acrylic, clear glass, and clear diffusing acrylic
- Maintenance-free, rugged construction
- Built-in constant current regulation
- Very even light pattern (as close as 76.2 mm or 3 inches)
|
|
If you are looking for Banner Linear Array Lights, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Banner High Power Array Light that you are looking for at the most competitive
prices possible. If you are searching for Banner Linear Light with Intensity Adjustment technical information (data-sheets) please use the datasheets
product selection guide page links.
|
High-Power |
High-Power Linear Array Lighting for use with Vision Systems
- Four high-intensity, visible wavelengths, plus IR
- The following array lengths are available, depending on model 145 mm (5.7"), 290 mm (11.4"), 435 mm (17.7"),
580 mm (22.8"), 870 mm (34.2") & 1160 mm (45.6")
- High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4 models) or
via hookup
- Optically isolated strobe signal
- Selectable Active High or Active Low strobe option
- LEDs directly illuminate target
- Lens angle of 6.5°
- Three window materials from which to choose: clear acrylic, clear glass, and clear diffusing acrylic
- Maintenance-free, rugged construction
- Built-in constant current regulation
- Very even light pattern (as close as 76.2 mm or 3 inches)
|
with Intensity Adjustment |
Linear Array with Intensity Adjustment High-Power Lighting with Intensity Adjustment for use with Vision
Systems
- Four high-intensity, visible wavelengths, plus IR
- The following array lengths are available: 290 mm (11.4"), 435 mm (17.7"), 580 mm (22.8"), 870 mm (34.2") &
1160 mm (45.6")
- Dual intensity control: potentiometer and Analog wire
- High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4 models) or
via hookup
- Optically isolated strobe signal
- Active High or Active Low strobe models available
- LEDs directly illuminate target
- Lens angle of 6.5°
- Three window materials from which to choose: clear acrylic, clear glass, and clear diffusing acrylic
- Maintenance-free, rugged construction
- Built-in constant current regulation
- Very even light pattern (as close as 76.2 mm or 3 inches)
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner
Engineering products enabling us to further assist you in finding the correct Banner array lights for your application in the
Pacific Northwest USA. We can proudly say that we carry more Banner Engineering products in stock than any other Banner
Engineering distributor in the Pacific Northwest region. Whether we have Banner linear lights in stock in Boise, Idaho or
need to get them from Banner Engineering; Clearwater Tech can get sealed array lights to you fast and save money! It will be
very helpful if you have the high power linear light part numbers ready, then our sales representatives can provide you with
a pricing and availability quote for Banner linear array lights with intensity adjustment that you are looking for in
seconds. If you do not have the part numbers for Banner linear array light, our application engineers will be able to help
you figure out the part numbers and get the price quote to you as soon as possible.
Please be aware that we cannot sell Banner Sensors out of our Area of Primary
Responsibility (APR).
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
