Banner Engineering

Home   >   Products   >   Ban-Eng   >   Safety   >   Control Modules

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Banner DUO-TOUCH SG Two-Hand Control Modules Model AT-FM-10K

• Diverse-redundant microcontrollers
• Monitors two Banner STB Self-Checking Optical Touch Buttons, or Two Mechanical Push Buttons
• Two redundant, forced-guided (mechanically linked) output contacts rated at 6 A
• Feedback input monitors external machine control elements
• 5 indicator LEDs for Power, Fault, Input 1, Input 2 and Output
• 24V ac/dc operation
• DIN-rail-mountable 22.5 mm-wide housing with removable terminal blocks
• 500 ms (max.) simultaneity requirement for touch-/push button operation

If you are looking for Banner DUO-TOUCH Modules, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the 2-Hand Control Module that you are looking for at the most competitive prices possible. If you are searching for DUO-TOUCH SG Module technical information (data-sheets) please use the Banner Control Modules Datasheets OR Product Selection Guide page links.

Banner DUO-TOUCH SG Two-Hand Control Modules Models AT-GM-11KM & AT-HM-11KM

• Diverse-redundant microcontrollers
• Module supplies power and monitors two Banner STB Self-Checking Optical Touch Buttons, or two mechanical push buttons
• Two redundant, forced-guided (mechanically linked) output contacts rated at 6 A
• Two auxiliary solid-state outputs (NPN and PNP), plus auxiliary N.C. relay output
• Feedback input for monitoring external machine control elements
• Seven indicator LEDs for Power, Fault, Input 1, Input 2, SSI, Mute, and Output
• 24V dc, 115V ac or 24V dc, 230V ac operation, depending on model
• DIN-rail-mountable 67.5-mm-wide housing with removable terminal blocks
• 500 ms (max.) simultaneity requirement for touch-/push-button operation
• Two mute inputs allow release of actuating buttons during the non-hazardous portion of the machine cycle.
• Safety Stop Interface (SSI) allows for connection of supplemental safeguards, E-stop, "Top" stop or anti-repeat devices, or the output of a brake monitor.

Banner DUO-TOUCH SG Two-Hand Control Modules Models AT-GM-13A & AT-HM-13A

• Diverse-redundant microcontrollers
• Supplies power and monitors two Banner STB Self-Checking Optical Touch Buttons, or two mechanical push buttons
• Four redundant, forced-guided (mechanically linked) output contacts rated at 6 A
• Two auxiliary solid-state outputs (NPN and PNP), plus auxiliary N.C. relay output
• Feedback input monitors external machine control elements
• 5 indicator LEDs for Power, Fault, Input 1, Input 2 and Output
• 24V dc plus 115V ac or 230V ac operation, depending on model
• DIN-rail-mountable 45 mm-wide housing with removable terminal blocks
• 500 ms (max.) simultaneity requirement for touch-/push button operation

Banner DUO-TOUCH Two-Hand Control Modules Models AT-FM-2A, AT-AM-2A & AT-BM-2A

• Two redundant, forced-guided (mechanically linked) output contacts rated at 4 A
• One auxiliary N.C. relay output rated at 0.5 A
• Feedback input for monitoring external machine control elements
• Four indicator LEDs for Power, Input 1, Input 2, and Fault
• 24V ac/dc, 115V ac, or 230V ac operation, depending on model
• DIN-rail-mountable 45-mm-wide housing
• 500 ms (max.) simultaneity requirement for touch-/push-button operation

Banner DUO-TOUCH Run Bar With STB Buttons

• Ergonomic design for reduced hand, wrist, and arm stresses associated with repeated switch operation; requires no physical pressure to operate
• Designed to minimize the possibility of defeat and accidental actuation
• Designed to comply with ANSI B11.19 and ISO 13851 (EN 574)
• Robust 13 gauge (0.090") cold-rolled steel construction
• Models available with IP20 or IP65 construction
• Two diverse-redundant microcontroller-based photoelectric STB self-checking touch buttons:
  • Continuous internal self-checking operation
  • Immunity to ambient light, EMI and RFI interference
  • High excess gain to cut through heavy contamination
  • LED power, output, and fault indicators
• Emergency stop button on some models
• Designed to be interfaced with DUO-TOUCH SG two-hand control modules or other control systems that comply, at minimum, with ANSI NFPA 79 or IEC 60204-1 twohand control requirements (e.g., anti-tie down)
• Accessory EZ-LIGHT with blue, red, green, and amber LEDs available
• Accessory brackets and telescoping floor-mounted stands available

Our Banner Engineering distributors warehouse in Boise, Idaho stocks some Banner Control Modules enabling us to further assist you in finding the correct Banner AT-FM-2A DUO-TOUCH SG Module for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering Module in stock than any other Banner Engineering distributors in the Pacific Northwest region. Whether we have AT-GM-13A 2-Hand Control Modules in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get Banner Module to you fast and save money!

It will be very helpful if you have the Banner Control Modules part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AT-GM-11KM DUO-TOUCH Module that you are looking for in seconds. If you do not have the part numbers for Banner AT-FM-10K Module, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).