Banner Engineering

Home   >   Products   >   Banner   >   Vision   >   Large Indicators

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Large self-contained indicators use long-lasting LEDs to provide highly visible multi-color indication in a single segment.

• No assembly required
• 30 mm threaded base for direct cabinet mounting with a single drilled hole
• An extensive variety of bracket and vertical standoff mounting accessories are available
• The large single illuminated segment provides easy-to-see operator guidance and indication of equipment status at long distances
• Models with 1, 2, or 3 colors available
• The LED light sources provide long life (100,000 hours on average) with low power consumption
• System is completely self-contained and IEC IP67 rated

If you are looking for Banner Large Indicators, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner K50L Multi-Function EZ-LIGHT that you are looking for at the most competitive prices possible. If you are searching for Banner K50L Sensor Emulator EZ-LIGHT technical information (data-sheets) please use the datasheets product selection guide page links.

Light for areas where high brightness is needed with viewing from all directions.

• Intense levels of light output for outdoor applications
• Perimeter and top view models available
• Rugged, sealed thermoplastic housing rated for IP67 and IP69K
• Cabled and quick-disconnect models available
• 12 to 30V dc or 85 -130V ac (75 to 120V dc) operation, depending on model

Compact, single-point devices for error-proofing of bin-picking operations. Rated to IP69K depending on installation.

• Rugged, cost-effective and easy-to-install solutions for error-proofing and parts verification applications
• Compact devices are completely self-contained - no controller needed
• Illuminated dome provides a big, easy-to-see job light with three colors: Green, Yellow, Red
• Push-button and passive-actuation models available
• Choose NPN or PNP output, depending on model
• Fully encapsulated IP67 construction - ideal for use in abusive environments; rated to IP69K, depending on installation
• Immune to ambient light, EMI and RFI interference
• 12 to 30V dc operation

Compact, single-point devices for error-proofing of bin-picking operations. Rated to IP69K depending on installation.

• Rugged, cost-effective and easy-to-install solutions for error-proofing and parts verification applications
• Compact devices are completely self-contained - no controller needed
• Illuminated dome provides a big, easy-to-see green job light; some models also light red for alternate operation
• Push-button and passive-actuation models available
• Fully encapsulated IP67 construction - ideal for use in abusive environments; rated to IP69K, depending on installation
• Immune to ambient light, EMI and RFI interference
• AS-i module compatible
• 12 to 30V dc operation

Flat pack mounting allows the DC-operated K50FL indicators with solid ON or flashing frequencies to be mounted on any flat surface.

• Rugged, cost-effective and easy-to-install indicators available in K50, K50 flat pack, or K80 housing style
• Displays 4 or 5 colors and multiple flashing frequencies: Steady ON, flashing or alternating
• Illuminated dome provides easy-to-see operator guidance and indication of equipment status
• Compact devices are completely self-contained - no controller needed
• Choose NPN or PNP input, depending on model
• Immune to ambient light, EMI and RFI interference
• 18 to 30V dc operation

DC-operated indicators with steady or pulsed sound indication

• Rugged, cost-effective and easy-to-install indicators available in K50 or K80 housing style with steady or pulsed sound indication
• Two decibel levels with steady or pulsed tone
• Illuminated dome provides a big, easy-to-see green, red or yellow job light
• Compact devices are completely self-contained - no controller needed
• Choose NPN or PNP input, depending on model
• Immune to EMI and RFI interference
• 18 to 30V dc operation

AC or DC operated indicator lights for outdoor applications.

• Intense levels of light output for outdoor applications
• Rugged, cost-effective and easy-to-install
• Compact devices are completely self-contained - no controller needed
• Up to three colors in one housing
• Immune to ambient light, EMI and RFI interference
• 50 mm diameter with flat profile and 30 mm mounting base
• Available in both 18 to 30V dc and 85 to 130V ac power options

AC operated, multi-color, general purpose indicators.

• Rugged, cost-effective and easy-to-install indicators available in K50 or K80 housing style
• Illumination provides easy-to-see operator guidance and equipment status indication
• Compact devices are completely self-contained - no controller needed
• 85 to 130V ac operation
• Displays 3 colors
• Immune to ambient light, EMI and RFI interference

Segmented multi-color point-of-use indicator

• Individual color quadrants can be lighted separately or in combination
• For error-proofing and "Andon" applications
• Provides operator guidance, even for those with limited color recognition ability
• Optional labels for enhanced segment identification
• Mounts easily on flat surface or pipe for elevated use
• PNP (sourcing) or NPN (sinking) input type, depending on model
• Flash functionality available on 1-color models

Banner Engineering EZ-LIGHT Traffic Lights are preassembled indicators for signaling and traffic control, available with one, two, or three indicators.

• Intense levels of light output for outdoor applications
• Controlled field of view for signage and narrow lane use
• Rugged, cost-effective and easy-to-install
• Compact devices are completely self-contained - no controller needed
• Immune to EMI and RFI interference
• Choose NPN or PNP input, and 15 to 30V dc or 85-130V ac operation, depending on model

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner Engineering products enabling us to further assist you in finding the correct CL50 general purpose column light for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering products in stock than any other Banner Engineering distributor in the Pacific Northwest region. Whether we have CL50 audible column light in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get K50 beacon light EZ-LIGHT to you fast and save money! It will be very helpful if you have the K50 pick-to-light EZ-LIGHT part numbers ready, then our sales representatives can provide you with a pricing and availability quote for K50FL general purpose EZ-LIGHT that you are looking for in seconds. If you do not have the part numbers for K50FL multi-function EZ-LIGHT, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).