February 11, 2010
SUNX
The HL-C1 Series
of laser displacement sensors provides a high-speed, stable measurement solution for a wide variety of applications. Its
compact design significantly reduces the needed installation space, all while including capability for two sensor heads,
and an integrated RS-232C port for communication with a PC.
Laser Displacement Switch
|
Datasensor Sensor
The TL50 digital contrast sensor line offers the best solution for all the
applications where cost reduction is requested, without compromising the excellent detection performances. The optimised
optics of these sensors, the RGB LED emission with automatic colour selection and the very fine resolution, allow the
detection of the weakest contrast of colours or grayscale between mark and background,
TL46 Series
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
Banner L-GAGE Q50 Series Sensors |
Banner L-GAGE Q50 Series - Light Gauging Sensors
- Combines laser-like performance with LED safety and economy
- Provides an appealing alternative to lasers for many applications, including dry-bulk level measurement, package
filling, roll-diameter measurement, loop control and dimensional measurement
- Available in discrete or analog models
- Includes visible red models with 50 to 300 mm range and infrared models with 50 to 400 mm range
- Features push-button TEACH-mode programming for custom sensing windows
- Offers remote programming for added security and convenience
- Allows choice of output response speed from 4 to 64 milliseconds
- Provides sensor linearity less than 1 percent of full scale
|
|
If you are looking for Banner Light Gauging Sensors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Banner LT3 L-GAGE Sensors that you are looking for at the most competitive prices possible. If
you are searching for Banner Light Gauging Sensor technical information (data-sheets) please use the
Banner Data Sheets OR
Product Selection Guide page links.
|
Banner Long-Range Time-of-Flight Laser Sensors |
Banner L-GAGE LT3 Series - Long-Range Time-of-Flight Laser Sensor
- Available in diffuse-mode models with ranges to 5 m and retroreflective models with a 50 m range
- Offered in dual-discrete or analog/discrete models
- Features push-button TEACH-mode programming for custom sensing windows
- Offers remote programming for added security and convenience
- Includes push-button programming for three output response speeds
- Simplifies alignment with a bright, visible laser spot
- Emits one million pulses per second
- Reliably detects angled targets
- Uses rugged construction to withstand demanding sensing environments-rated IEC IP67; NEMA 6
|
Banner L-GAGE LT7 Long-Range Time-of-Flight Sensors |
Banner L-GAGE LT7 Series - L-GAGE LT7 Long-Range Time-of-Flight Laser Sensors
- Offered in retroreflective models with two discrete outputs (PNP) for extremely long ranges up to 250 m
- Available in diffuse models with two discrete outputs (PNP) and one 4-20 mA output for long-range background
suppression up to 10 m
- Provides two alarm outputs with ongoing LCD display for easy troubleshooting
- Features TEACH-mode programming, using integrated Push-Buttons or serial
interface
- Continually displays sensing distance in millimeters or hundredths of an inch
- Delivers excellent ±10 mm linearity
- Offers choice of RS-422 or SSI-compatible serial connection
- Uses visible Class 2 alignment laser for accurate alignment
- Provides quick warmup to minimize drift
|
Banner L-GAGE LG5 & LG10 Series Laser Gauging Sensors |
Banner L-GAGE LG5 & LG10 Series - Laser Gauging Sensors
- Conserves production space by using a one-piece design
- Does not touch parts it measures, so can be used with moving processes, hot parts and sticky parts
- Provides 12 to 30V dc supply voltage with either an NPN or PNP discrete output, and a 4-20 mA or 0-10V dc analog output
- Automatically scales the analog output over the width of the programmed sensing window
- Features outstanding maximum resolution of 3 µm for flat white targets
- Uses an ultra-narrow beam to precisely measure distance, height or thickness
- Available in ranges of 45 to 60 mm (LG5) and 75 to 125 mm (LG10)
- Lets you pick the exact range you need with the push of a button
- Features push-button TEACH-mode programming for custom sensing windows
- Offers remote programming for added security and convenience
- Uses push-button programming for three output response speeds
|
|
Our Banner Engineering distributors warehouse in Boise, Idaho stocks some Banner Light Gauging Sensors
enabling us to further assist you in finding the correct Banner Sensors for your application in the Pacific Northwest USA. We
can proudly say that we carry more Banner Engineering Light Gauging Sensors in stock than any other Banner Engineering distributors in the
Pacific Northwest region. Whether we have Banner L-GAGE LT7 Series Sensors in stock in Boise, Idaho or need to get them from Banner
Engineering; www.clrwtr.com can get Banner Sensors to you fast and save money!
It will be very helpful if you have the Banner Light Gauging Sensor part numbers ready, then our
sales representatives can provide you with a pricing and availability quote for Banner L-GAGE LG5 & LG10 Series Sensors that
you are looking for in seconds. If you do not have the part numbers for Banner Sensors, our application engineers will be able
to help you figure out the part numbers and get the price quote to you as soon as possible.
Please be aware that we cannot sell Banner Sensors out of our Area of Primary
Responsibility (APR).
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
