|
If you are looking for Banner MAXI-BEAM Photoelectric Sensors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Banner MAXI-BEAM Photoelectric Sensor that you are looking for at the most
competitive prices possible. If you are searching for Banner MAXI-BEAM Switches technical information (data-sheets) please
use the datasheets or product selection guide page links.
Banner MAXI-BEAM sensors are highly versatile, self-contained, modularized photoelectric sensing controls
that are ideally suited to industrial environments. The basic MAXI-BEAM is an ON/OFF switch consisting of three modules: a
sensor head, a power block, and a wiring base. The sensor head contains the complete modulated photoelectric amplifier as well
as the emitter and receiver optoelements. A unique, patented, "programming ring" (supplied with each sensor head) enables you
to program your choice of "light" or "dark" operate mode, sensing range, and response time. MAXI-BEAM sensor heads have an
easily-accessible multi-turn SENSITIVITY control for precise adjustment of system gain.
Interchangeable sensor heads are rotatable in 90-degree increments, and are available in opposed,
retroreflective, diffuse, convergent, and fiber optic models. Each sensor head also includes Banner's exclusive, patented
Alignment Indicating Device (AID, U.S. patent #4356393), which lights a top-mounted LED when the sensor "sees" its own
modulated light source and pulses at a rate proportional to the received light signal strength. The power block provides the
interface between the sensor head and the external circuit. It contains the power supply for the MAXI-BEAM plus a switching device to interface with the
circuit to be controlled. DC power block versions operate on 10 to 30V dc and have solid-state sourcing and sinking outputs
rated at 250mA each (maximum).
AC models are available for 120V or 240V ac operation, and are offered in both 2-wire and 3- or 4-wire
formats. The plug-in design of the wiring base enables easy exchange of the entire sensing electronics without disturbing the
field wiring. Status LEDs on the power block module continuously indicate the state of the output circuit. Optional
logic modules are available which easily convert the basic ON/OFF MAXI-BEAM into either
a one-shot or delay logic function control. The logic module comes with a programming ring which is used to select one of
several timing ranges for each logic function. Timing adjustments are made via two 15-turn clutched potentiometers, accessible
from the outside. Once programmed, the logic module may be rotated in 90-degree increments to allow time adjustment access from
the most convenient location
All MAXI-BEAM components are encapsulated within rugged, corrosion-resistant VALOX housings which meet or
exceed NEMA 1, 3, 4, 12, and 13 standards. Modules simply snap and bolt together, with no interwiring necessary. Module
interfaces are o-ring and quad-ring sealed for the ultimate in dirt, dust, and moisture resistance. All MAXI-BEAM components
(except for power block model RPBR) are totally solid-state for unlimited life. MAXI-BEAM assemblies have the same mounting
configuration as MULTI-BEAM Series Sensors, and are physically interchangeable
with Heavy-Duty Industrial Limit Switch.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner fullsize
photoelectric sensors enabling us to further assist you in finding the correct Banner switch for your application in the Pacific
Northwest USA. We can proudly say that we carry more Banner Engineering MAXI-BEAM sensors in stock than any other Banner
Engineering distributors in the Pacific Northwest region. Whether we have Banner MAXI-BEAM photo eyes in stock in Boise, Idaho
or need to get them from Banner Engineering; Clearwater Tech can get Banner Sensors to you fast and save money! It will be very
helpful if you have the Banner fullsize sensor part numbers ready, then our sales representatives can provide you with a pricing
and availability quote for Banner MAXI-BEAM switches that you are looking for in seconds. If you do not have the part numbers
for Banner sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to
you as soon as possible.
Please be aware that we cannot sell Banner Sensors out of our Area of Primary
Responsibility (APR).
|
