LX Series
D10 Expert Series
Small Object Counter

Leuze Sensors

The MLDSET protective sensor sets are muting systems for access guarding with 2- and 3-beam MLD transceiver devices, pre-mounted in device columns. If you would like to more easily and more quickly implement access guarding with reduced logistical work, protective sensor sets are an attractive solution. Components that are electronically and mechanically optimized to one another and which are equipped with connectors ensure fast start-up of

SUNX Sensors

SUNX FZ-10 series of color detection fiber sensors provide reliable and precise color discrimination by utilizing red, green, and blue LEDs as its light sources. Each LED is digitally processed so that accurate color detection is attained that is not possible with conventional fiber sensors. And with a 1ms response time, the FZ-10 is also suitable for high-speed manufacturing lines. The setup procedure for the FZ-10

Banner Engineering

Home   >   Products   >   Banner   >   Part-Sensing Sensors

Banner Engineering

(800) 894-0412       (888) 723-4773 (Fax)

Banner Lens Shields For LX Series Part-Sensing Light Screen Sensors Distributors
LX Series

Banner LX Series Sensors - For Sensing Small or Flat Parts at High Speeds

  • Generates a multiple-beam infrared pattern for extraordinary sensitivity to small objects
  • Detects objects as small as 5.6 mm and extremely flat objects that pass anywhere through the light screen
  • Responds in 0.8 to 3.2 milliseconds-faster than comparable products, even at its slowest response speed
  • Enables automated systems to operate at peak efficiency
  • Ideal for die-protection (part ejection verification), small part or pill counting, parcel handling and sorting by height
  • Available in 67, 143 or 295 mm lengths and two sensing ranges: 100 to 200 mm and 300 mm to 2 m
  • Features rugged silver anodized housing with IP65 rating
  • Uses integrated T-slot mounting channel for unique mounting flexibility

If you are looking for Banner Part-Sensing Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner LX Series High Speed Light Screens that you are looking for at the most competitive prices possible. If you are searching for Banner Part-Sensing Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

Banner D10 Fiber Optic Switch Distributor
D10 Series

D10 Series for Use with Plastic Fibers

  • Features advanced fiber optic amplifier for use with plastic fibers
  • Available in bipolar discrete, dual-discrete and analog/discrete models
  • Features numeric or bargraph display on Expert models
  • Available in models with push-button programming or manual gain adjustment
  • Available with visible red/green sensing beam
  • Provides light-operate or dark-operate operation
  • Features thin 10 mm housing for use with standard 35 mm DIN-rail mounting
Banner MULTI-BEAM LS4 LS10 Light Screen System For Sensing Small Parts at High Speeds Distributors
LS4 & LS10 Series

Banner LS4 & LS10 Series Sensors

  • Array reliably senses small parts passing anywhere through the light screen
  • Sensing area measures 90 mm by up to 2.29 m (LS4 models)
  • Models vary in range and minimum object sensitivity
  • Sensor responds in 1 millisecond and includes built-in 5 millisecond output pulse stretcher
Banner BMLV Series BEAM-ARRAY Retroreflective Part Counting Light Curtains Distributors
BMLV Series

Banner BMLV Series - Retroreflective Part Counting Light Curtains

  • System is ideal for sensing or counting large objects falling through the sensing area.
  • Minimum object size is 50 mm at 0.6 m from the sensor and 125 mm at 2.1 m from the sensor.
  • Sensors are available in the following lengths: 1200, 2400, 3600 and 4800 mm.
  • Maximum range is 3 m, when used with Banner high-grade retroreflective tape.
  • Output choices are light operate and dark operate.
  • Housing is rugged extruded aluminum.
  • Installation and alignment are simple and fast.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner Part-Sensing Sensors enabling us to further assist you in finding the correct Banner Sensors for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering Part-Sensing Sensors in stock than any other Banner Engineering distributors in the Pacific Northwest region. Whether we have Banner Part Counting Light Curtains in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get Banner Sensors to you fast and save money!

It will be very helpful if you have the Banner Part-Sensing Sensors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Banner LX Series Sensors that you are looking for in seconds. If you do not have the part numbers for Banner LS4 & LS10 Series Part-Sensing Sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).

LS4 Series
Part Number:

Search Tips

Can't find a part number?
E-mail Us!

LS10 Series
LX Series
D10 Expert Small Object Counter