EZ-LIGHT
Call Lights
Indicator Lights
Cables

CONTRINEX Sensors

Devices of Series 1180/1181 and 1300 - 1303 can be synchronized with each other by simply connecting their synchronization outputs (pin 2 for N.O., pin 4 for N.C.). In this way, up to 10 sensors can be synchronized. In many cases, it is thus possible to mount the sensors very close to one another without mutual interference. The fourth connection can be used as an external release input. Thus, ultrasonic sensors can be activated or

Red Lion Modules

A Wide Range of I/O modules are available for use with the CSMSTR master Modular Controller. The master controller uses a high-speed serial protocol to communicate, with up to 16 slave I/O modules. Through the same backplane connection, the master Modular Controller also provides power to the modules making installing and powering these Modular Controllers easy. The CSMSTR master Modular Controller automatically identifies and addresses

Banner Engineering

Loading

Home   >   Products   >   Banner   >   Accessories

Banner Engineering

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Banner Photoelectric Cables Distributor
Quick Disconnect Cables

Banner Photoelectric Cables - A complete selection of cables for easy hookup of ac, dc and ac/dc powered devices

  • Quick-disconnect (QD) cables allow sensors and safety devices to be replaced or moved quickly, minimizing down-time.
    • Pico-, Euro-, and Mini-styles are available for dc powered devices.
    • Micro- and Mini-styles are available for ac powered devices.
  • Choose straight or right-angle connectors.
  • Splitter cables are available for powering two devices with one cable.

If you are looking for Banner Photoelectric Accessories, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner EZ-LIGHT Indicator Lights that you are looking for at the most competitive prices possible. If you are searching for Banner Cables technical information (data-sheets) please use the Banner Accessories Datasheets OR Product Selection Guide page links.

Banner EZ-LIGHT K80 Call Lights Distributors
EZ-LIGHT K80 Call Lights

EZ-LIGHT K80 Call Light

  • Illuminated dome provides easy-to-see call-for-assistance indication
  • Battery powered
  • Flashes ON/OFF
  • Switch activated
  • For "Andon" applications
  • Andon lights on machines or production lines indicate operation status. They are often located overhead for workers or a supervisor to view them.
  • No assembly required
  • Rugged, cost-effective and easy-to-install
Banner WL50F General Purpose LED Work Lights Distributor
Task Lights

Task lights are specifically designed to provide brilliant illumination to enclosures, cabinets, and other work areas with otherwise poor lighting.

  • WL50 General Purpose EZ-LIGHT - Designed for enclosure or area lighting to illuminate a large area with an even pattern of light and no shadows.
  • WLA Series Work Light - Developed for lighting industrial work cells including areas with exposure to liquids such as food and beverage processing applications and machining centers.
  • WLS28 Work Light Strip - Even, bright, highly efficient white LED illumination for industrial control cabinets, and work cells with poor factory lighting conditions.
Banner 70 X 70mm & 85 X 220mm Backlights Red or Infrared for PresencePLUS P4 Sensors Distributors
Backlights

A backlight provides even, low-intensity light. It is placed behind the target and aimed directly back towards the camera. The resulting silhouette can be inspected for proper size and shape.

  • Connects directly to PresencePLUS vision sensors or an external power supply
  • Installs directly behind the target
  • Determines the shape and size of target objects
  • Offers a highly diffused surface and uniform brightness, with a lower intensity than other lights
  • Provides the most robust lighting for measuring and gauging
  • Highlights through-holes in target objects
  • Offers choice of models with infrared or visible red, white, blue or green lights
  • Provides minimum useful life of 10,000 to 100,000 hours, depending on model
Banner Photoelectric Accessories EZ-LIGHT Indicator Lights Distributors
Indicator Lights

Banner Accessories - EZ-LIGHT Indicator Lights

  • Displays the status of remote or inaccessible sensors
  • Replaces cumbersome post or stack lights with a single compact, unobtrusive and inexpensive unit
  • Installs without certified personnel, conveniently near the operator
  • Available in four configurations for a variety of applications
    • Multi-color general purpose models feature red/yellow/green multifunction display standard with optional custom LED colors.
    • Multi-color 7-function models feature seven addressable functions through simple wiring logic.
    • 2-color sensor emulator models act as large remote indicators for sensor status.
    • 2-color for use with EZ-SCREEN provide remote indication of light screen status.
  • Available in straight, right-angle and dome-shaped housings for mounting almost anywhere
  • Displays up to five colors, depending on model
  • Eliminates bulb replacement with long-lasting LEDs
  • Compatible with PLC or other logic-level control outputs
  • Features up to IP69K-rated (some models) water- and oil-tight housings for direct machine mounting
Banner Photoelectric Accessories Mounting Brackets Distributor
Mounting Brackets

Banner Accessories - Mounting Brackets

  • Using the right bracket ensures optimum performance from your Banner sensors.
  • Stainless steel and reinforced thermoplastic polyester mounts reduce installation time and lower total installed cost.
  • Choice includes angled, through-hole and split-clamp models that mount to a flat surface.
  • Versatile swivel-mount models mount flat and have an adjustable ball to position the sensor at any angle.
  • Custom brackets can be designed for your unique applications.
Banner Photoelectric Retroreflectors Distributors
Banner Retroreflectors

Banner Photoelectric Retroreflectors - High-quality targets for acrylic or high-temperature targets and adhesive-backed retro tapes

  • Banner offers a complete line of high-quality acrylic targets, high-temperature targets and adhesive-backed retroreflective tapes.
  • Numerous sizes, shapes and mounting options meet your application requirements.
  • New high-reflectivity models dramatically increase sensing ranges, with reflectivity factors up to 3x.
  • Maximum temperature ratings range from 50° to 480° C.
  • Various mounting options are available.
Banner BT-1 BEAM-TRACKER LAT-1 Laser Alignment Tools Distributor
Alignment Tools

Banner Alignment Tools - Low-cost diagnostic tools for evaluating sensor performance and alignment

  • Alignment tools simplify the critical mechanical and optical alignment of emitters, receivers and mirrors.
  • LAT laser alignment tools simplify the alignment of sensors or safety light screen pairs with infrared sensing beams.
  • LAT models are available for use with the PICO-GUARD, EZ-SCREEN (Type 4 & 2), MINI-SCREEN, MICRO-SCREEN and MINI-ARRAY families and all sensors with an infrared sensing beam.
  • The BEAM-TRACKER BT-1 quickly and accurately checks sensor alignment in opposed-mode sensors.
Banner PS24-1 SPS101 DC Sensor Power Supplies Distributors
Power Supply

Banner Sensor Power Supplies - A wide selection of power supplies and boxes for powering, testing and programming dc sensors

  • Power supplies allow dc sensors to function in ac environments.
    • PS24-1/PS115-1 power supply interfaces ac power supply and dc-operated sensors.
    • SPS101 Series power supply coverts 120V ac voltage to dc for powering any Banner dc sensor with a 4-pin or 5-pin Euro-style quick-disconnect.
    • PSDINA-24 DIN-mountable power supply converts 115/230V ac voltage to 24V dc for powering dc sensors.
  • Portable demo and programming boxes are used to test and program dc sensors.
    • DBQ5 portable demo box is powers dc sensors for testing purposes.
    • DPB1 handheld portable programming box is used for configuring sensors when programming push buttons are inaccessible.
Banner PSDINA-24-4 DIN-Mount 24V DC 4A Power Supply Distributors
PSDINA-24-4 Series

PSDINA-24-4 Series

Designed to provide low noise DC power, the PSDINA-24-4 Power Supply is a DIN-rail mountable power supply for use with 24 Vdc-powered sensors, vision cameras and lighting systems in industrial automation applications.

Ultrasonic and photoelectric sensors always benefit from the use of a high quality and low noise power supply, and the model PSDIN-24-4 power supply meets the need perfectly. Vision cameras and lighting systems also place high demands on power supplies, and the PSDINA-24-4 power supply will provide reliable and consistent power for these devices as well.

The PSDINA-24-4 power supply is UL listed and CE approved. The supply has an efficiency of > 80% under load and is offered for sale at a competitive list price of $175.

Banner EZ-LIGHT K30L Series with Independent Push Button Indicators Distributors
EZ-LIGHT K30L Series

EZ-LIGHT K30L Series with Independent Push Button Contact

Banner's K30L lighted 22 mm mount pushbuttons offer a simple operator interface solution. In applications requiring an electrically isolated light and button, the machine controller chooses when to turn the light on and off.

  • 1, 2 and 3-color models with up to nine single colors available
  • 10 to 30V dc operation for mobile and battery-powered applications
  • Light and switch are electrically isolated
  • Long-life LEDs for low maintenance operation
  • Robust IP65 rated pushbutton works well in many environments
  • Easy installation with quick disconnect models
Banner EZ-LIGHT S18L Series Daylight Visible Color General-Purpose Indicators Distributors
EZ-LIGHT S18L Series

EZ-LIGHT S18L Color General-Purpose Indicators

  • Up to three independent colors in one unit
  • Translucent face appears gray when off to avoid false indication
  • M12 Euro connector models available for plug and play indication
  • Wide 180° field of view
  • Wide 10 to 30V dc operating range allows for use in battery powered mobile applications
  • Available with PNP or NPN input, depending on model
  • IP69K rated to withstand harsh wash-down environments
  • Wide operating range of -40° to +50° C
  • Daylight visible models with a clear cover and more focused light output provide greater visibility in high ambient light conditions
Banner WL50S High-Intensity General-Purpose LED Spot Work Lights Distributors
WL50S Series

WL50S High-Intensity Spot Work Light

Provide a very bright sealed spotlight for general task lighting applications. The IP69K rating makes this product ideal for harsh wash-down environments such as food and beverage processing. The 30mm threads and the large selection of accessory brackets make mounting and alignment simple.

  • Highly concentrated, focused light available in three colors (white, red, or green)
  • Lenses come in three angles to cover area of concentration
  • Illuminates a large area with an even pattern of light and no shadows
  • 12 to 30V dc operation
  • Cabled and quick-disconnect models available
  • 56 mm diameter with flat profile and 30 mm mounting base
  • Rugged sealed housing rated to IP69K
  • Available in a chemically resistant 316 stainless steel housing for use in harsh environments

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner Power Supplies enabling us to further assist you in finding the correct Banner EZ-LIGHT Indicator Lights for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering Photoelectric Sensor Brackets in stock than any other Banner Engineering distributors in the Pacific Northwest region. Whether we have Banner Alignment Tools in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get Banner Sensors to you fast and save money! It will be very helpful if you have the Banner Cables part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Banner Reflectors that you are looking for in seconds. If you do not have the part numbers for Banner Indicator Lights, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).

Mounting Brackets
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Retroreflectors
Power Supplies
Alignment Tools
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY