(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Banner WORLD-BEAM Q12 Photo eye is a rugged ultra-miniature sensor with multiple modes for accurate sensing in confined spaces.

• Features a housing just 22 by 8 by 12 mm, with bipolar NPN/PNP outputs
• Available in opposed, fixed-field, and polarized and non-polarized retroreflective sensing modes
• Delivers powerful sensing performance in extremely confined areas
• Rated IP67 for use in the widest range of locations and applications
• Uses unique overmolded design for enhanced durability and shielding
• Available in dark- or light-operate models

If you are looking for Banner Photoelectric Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner Photo Eyes that you are looking for at the lowest prices possible. If you are searching for Banner Photo Sensor technical information (data-sheets) please use the Banner Data Sheets page link.

Banner M18 Series Compact Photo Sensors come with 18 mm threaded stainless-steel barrels with EZ-BEAM style optics and electronics, for reliable sensing without adjustments.

• Specially designed EZ-BEAM style optics and electronics for reliable sensing without adjustments
• 10 to 30V dc with NPN or PNP outputs
• 18 mm stainless-steel threaded barrel sensor
• Available in opposed, polarized and non-polarized retroreflective, and diffuse and fixed-field sensing modes
• Marginal gain indicator with alarm output
• Dual-LED multi-function indicators for monitoring sensor performance

EZ-BEAM style right-angle Banner Midsize Photoelectric Sensors come with 30 mm threaded mounting base.

• Features EZ-BEAM technology, with specially designed optics and electronics for reliable sensing without adjustments
• Completely epoxy-encapsulated for superior durability, even in harsh sensing environments
• Features rectangular 40 mm plastic housing with 30 mm threaded mounting base
• Uses innovative dual-indicator system to take the guesswork out of monitoring sensor performance
• Available in models for ac or dc power and bus network compatible connection
• Includes advanced diagnostics to warn of marginal sensing conditions or output overload (dc models)

Banner Q45 photoelectric is an advanced one-piece, rugged sensor with outstanding optical performance.

• Uses extremely rugged design that exceeds NEMA 6P and IEC IP67 standards and withstands 1200 psi washdown
• Features highly visible LED indicators for Power, Signal and Output
• Accommodates output timing logic or 7-segment LED signal strength display on standard models
• Available in opposed, polarized and non-polarized retroreflective, diffuse, convergent, laser, and glass or plastic fiber optic sensing modes
• Available in models for dc, ac, ac/dc universal voltage power and bus network compatible connection
• Offered in laser diode retroreflective and NAMUR models

Banner D10 Series - Redefining High-Performance Fiber Optic Sensing

• Features advanced fiber optic amplifier for use with plastic fibers
• Available in bipolar discrete, dual-discrete and analog/discrete models
• Features numeric or bargraph display on Expert models
• Available in models with push-button programming or manual gain adjustment
• Available with visible red or green sensing beam
• Provides light-operate or dark-operate operation
• Features thin 10 mm housing for use with standard 35 mm DIN-rail mounting

Banner STB touch-activated photoelectric switches are self-checking to ensure reliability.

• Provides highest level of safety for two-hand control input devices, per independent certification tests
• Provides redundant microprocessor and optical path
• Responds to a finger blocking light rather than to pressure
• Features ergonomic design to prevent repetitive motion stress
• Includes yellow field cover to prevent unintended switching
• Immune to ambient light, EMI and RFI
• Available with e/m relays rated for 1 amp switch capacity or solid-state outputs rated for 150 mA
• Withstands exposure to a variety of chemicals, depending on model

Small, flat, self-contained Banner M-GAGE Q7M Series vehicle detection sensor/amplifier can be surface mounted, embedded in pavement during installation or inserted into a small cut in existing pavement.

• Reliably detects the presence of a large metal object-such as a car, truck or railcar-even when the vehicle is not moving
• Mounts above ground or underground in a single 3/8-inch saw cut into existing pavement
• Features completely self-contained Flat-Pak design with no external controller
• Allows IDEC PLC to be used in place of amplifiers and timer cards
• Encapsulated in rugged epoxy to prevent moisture penetration

With opposed mode sensing pairs in U-shaped housings Banner SL10 & SL30 Series Slot Sensors are ideal for sensing of color marks on clear film.

• Holds easy-to-use opposed mode sensor pairs in rugged U-shaped housing
• Available with 10 mm sensing slot (SL10 models) or 30 mm sensing slot (SL30 models)
• Ideal for detecting registration marks, holes or gear teeth; edge guiding; and counting
• Features molded-in beam guides to simplify installation and alignment
• Offers fixed sensitivity, 4-turn manual sensitivity adjustment or push-button programming, depending on model
• Uses either visible red or infrared sensing beam, depending on model

Banner PICO-AMP MD14 Series Amplifiers

• Full-featured amplifier for use with remote sensors in confined areas
• Ideal for remote sensing in wafer handling, small-part sensing and pharmaceutical applications
• Three modulation frequency selections or auto frequency mode to minimize optical crosstalk potential between adjacent sensors
• 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
• Marginal gain indicator with alarm output
• Light- or dark-operate selectable
• 12-turn potentiometer for manual adjustment of sensitivity
• Two-position switch for no output delay or 50 millisecond OFF-delay
• Sensing heads in opposed or diffuse sensing modes

Banner QL50 Series Sensors - A low-cost, self-contained sensor that detects luminescent marks or targets, even on luminescent backgrounds and reflective surfaces

• Detects luminescence inherent in a material and luminophores added to a material
• Senses luminescent marks, even on luminescent backgrounds and reflective surfaces such as ceramic, metal or mirrored glass
• Features compact, self-contained design
• Offers easy-to-set programming options for sensing precision
• Responds in 250 microseconds
• Available in models with NPN or PNP discrete outputs

Banner QC50 Color Sensors

• Available in two versions for application flexibility: QC50 models for most applications and QCX50 models for more challenging applications such as differentiating dark blue from black
• Accurately analyzes and compares color to color, or varying intensities of one color
• Features easy-to-set push-button programming options for one, two or three colors
• Delivers fast sensing with a response time of 335 microsecond for the QC50 and selectable 1 or 5 milliseconds for the QCX50
• Features compact, self-contained design
• Includes three programming parameters: channel, sensing mode and tolerance level
• Available in models with three NPN or three PNP outputs, one for each color channel

Banner Accessories - EZ-LIGHT Indicator Lights

• Displays the status of remote or inaccessible sensors
• Replaces cumbersome post or stack lights with a single compact, unobtrusive and inexpensive unit
• Installs without certified personnel, conveniently near the operator
• Available in four configurations for a variety of applications
  • Multi-color general purpose models feature red/yellow/green multifunction display standard with optional custom LED colors.
  • Multi-color 7-function models feature seven addressable functions through simple wiring logic.
  • 2-color sensor emulator models act as large remote indicators for sensor status.
  • 2-color for use with EZ-SCREEN® provide remote indication of light screen status.
• Available in straight, right-angle and dome-shaped housings for mounting almost anywhere
• Displays up to five colors, depending on model
• Eliminates bulb replacement with long-lasting LEDs
• Compatible with PLC or other logic-level control outputs
• Features up to IP69K-rated (some models) water- and oil-tight housings for direct machine mounting

Our Banner Engineering distributors warehouse in Boise, Idaho stocks some Banner Photoelectric Sensors enabling us to further assist you in finding the correct Banner Sensors for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering Photo Eyes in stock than any other Banner Engineering distributors in the Pacific Northwest region. Whether we have Banner Photo Sensors in stock in Boise, Idaho or need to ship direct from Banner Engineering; www.clrwtr.com can get Banner Sensors to you fast and save money!

It will be very helpful if you have the Banner Photo Electric Sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Banner Photoelectric Sensors that you are looking for in seconds. If you do not have the part numbers for Banner Sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).