A-GAGE
Loading
EZ-ARRAY
MINI-ARRAY
July 27, 2012

CONTRINEX Screens

The Active Optoelectronic Protective Devices (AOPD) resolution must be chosen according to the application and the required safeguarding function. It is defined as the minimum size of an object that can be reliably and safely detected at any position in the protective field. The light curtain or barrier detection capability (or resolution) depends on the distance between the centerlines of each beam emitted by the sender.

ABB Monitors

The CM-ENS Monitors levels of conductive liquids and is used for example for liquid level control in pump systems. It can be used for filling or draining tanks for example. It is also suitable for monitoring the conductivity of liquids. The measuring principle is based on the resistance change sensed by single-pole electrodes. After the supply voltage is applied to the terminals A1 and A2, the output relay is de-energized.

Banner Engineering

Home   >   Products   >   Banner   >   Safety Light Curtains

Banner Engineering

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Banner EZ-SCREEN Safety Light Curtains Distributors
Type 4

Type 4 Safety Light Curtains

Type 4 safety light curtains protect personnel from injury and machines from damage by guarding points of operation, access, areas and perimeters. With self-checking circuitry, Type 4 light curtains provide control reliability and high levels of fault tolerance.

Non-contact EZ-SCREEN machine guarding systems protect fingers, hands and ankles, and guard perimeters and access, using self-contained emitters and receivers without a separate control box.

The space-saving, compact profile of the EZ-SCREEN LP is ideal for smaller machines, yet robust enough to meet the demands of large power presses.

Rugged compact non-contact MINI-SCREEN machine guarding light screen systems are suitable for heavy-duty machine guarding applications.

If you are looking for Banner Safety Light Curtains, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Banner EZ-ARRAY Series Safety Light Screens that you are looking for at the most competitive prices possible. If you are searching for Banner A-GAGE MINI-ARRAY Measuring Array Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

Banner EZ-SCREEN Type 2 Safety Light Curtains A Low-Cost Solution for Lower Risk Applications Distributor
EZ-SCREEN Type 2

EZ-SCREEN Type 2 Safety Light Curtain Systems

Inexpensive, compact optical safeguarding solution is designed for lower-risk applications where risk of injury is limited but some guarding is necessary.

  • Features simple, two-piece integrated system with no control box
  • Detects narrow objects, such as a hand or ankle
  • Offered with 30 mm resolution and 15 m range
  • Provides economical, compact optical safeguarding
  • Meets Type 2 requirements per IEC61496-1/-2 and Category 2 per EN954-1
  • Available in trip (auto reset) or latch (manual reset) models
  • Offers optional lens shields and enclosures for added durability
Banner EZ-SCREEN Safety Light Curtains Distributors
EZ-SCREEN

EZ-SCREEN Safety Light Curtain Systems

Non-contact machine guarding systems protect fingers, hands and ankles, and guard perimeters and access, using self-contained emitters and receivers without a separate control box. Thanks to its excellent optical design and finely focused 2.5 beam, EZ-SCREEN Systems are extremely easy to align and maintain.

The space-saving, compact profile of the EZ-SCREEN LP is ideal for smaller machines, yet robust enough to meet the demands of large power presses.

  • EZAC Series AC Interface Box
  • LPSS Series Snap-On Lens Shields
  • EZA-MBK-21 Mounting Bracket
  • EZAC-RM-1 & EZAC-RM-2 Relay Modules
Banner MINI-SCREEN Machine Safety Light Curtains Distributors
MINI-SCREEN

MINI-SCREEN Safety Light Curtain Systems

  • Family is designed for heavy-duty production machinery.
  • Full system includes emitter, receiver, controller and interconnecting cables.
  • Standard or heavy-duty housing is available for emitters and receivers.
  • Emitters and receivers feature compact housing with 19, 25 and 38 mm resolution.
  • Controllers are available with dc or ac supply voltage.
  • Metal box and DIN-module controllers are available.
  • Systems include floating blanking (one- or two- beam), selectable auto power-up and optional fixed blanking.
Banner A-GAGE EZ-ARRAY Series Measuring Array Safety Light Curtains Distributor
A-GAGE EZ-ARRAY

Banner A-GAGE EZ-ARRAY Series - Measuring Array Sensors

  • Applications include edge and center-guiding, loop tension control, hole sizing, parts counting and on-the-fly product sizing and profiling.
  • Closely spaced infrared beams detect objects as small as 5 mm wide; edge resolution is 2.5 mm.
  • Controller functionality is built into the receiver, so basic setup requires no controller, software, or PC.
  • Easy-to-use software is included for advanced configuration, using a PC.
  • Configuration options include 14 measurement modes, three scanning methods, two analog and two discrete outputs and a serial output.
  • Range is 4 meters.
  • Array heights range from 150 to 2400 mm.
Banner A-GAGE MINI-ARRAY Series Measuring Array Safety Light Curtains Distributors
A-GAGE MINI-ARRAY

Banner A-GAGE MINI-ARRAY Series - Measuring Array Sensors

  • Features low-profile, programmable measuring light screen systems for inspections and profiling
  • Includes a controller, emitter/receiver pair and interconnecting cables
  • Offers programmable controller with a selection of measurement modes, scan modes and output configurations
  • Available in heights from 133 to 1819 mm, depending upon model
  • Offers emitters/receivers for detecting objects as small as 12.7 mm
  • Includes advanced configuration software
  • Available in models for central monitoring and control over a DeviceNet control network
  • Features optional heated enclosures for outdoor applications
Banner AG4-4E & AG4-6E Series Safety Laser Scanners Distributor
AG4-4E & AG4-6E Series Scanners

AG4 Series Safety Laser Scanners

Banner Engineering's AG4 Series Laser Scanners are two-dimensional safety laser scanners that effectively protect personnel and stationary or mobile systems within a user designated area as well as provide access protection for AGS gates on a robot cell.

  • Very flexible protective and warning fields can take nearly any shape
  • Capable of switching "on-the-fly" between eight pre-configured field pairs
  • Adjustable response time (80 ms to 640 ms)
  • Selectable resolutions 30mm, 40mm, 50mm, 70mm, 150mm
  • Two models available: AG4-4E with a maximum 4 meter range, AG4-6E with a maximum 6.25 m range
  • Interfacing options include: SC22-3/-3E Safety Controller
  • , UM-FA-9A/-11A Universal Input Safety Module, MMD-TA-11A-12B Dual Controller Muting Module
  • Compact design, simple installation and easy-to-use software provide efficient integration into work zones
  • Rugged, die-cast aluminum housing withstands the rigor of factory floors.
Banner EZ-ARRAY Series USB Serial Adapters Distributor
EZ-ARRAY USB Serial Adapters

Banner EZ-ARRAY USB Serial Adapter

  • For use with the A-GAGE EZ-ARRAY measuring light curtain, when using PC-based EZ-ARRAY software
  • Connects to a USB port on a computer or USB hub
  • Provides a quick solution for converting from a universal serial bus interface to the EZ-ARRAY RS-485 interface
  • Comes with USB cable and software
  • Requires no additional power supply
Banner A-GAGE MINI-ARRAY Series High Resolution Safety Light Curtains Distributors
A-GAGE High Resolution

Banner EZ-ARRAY USB Serial Adapter

  • Excels at high-speed, precise monitoring and inspection applications, including on-the-fly sizing, profiling, precision edge and center guiding, and hole detection
  • Includes controller, emitter/receiver pair and interconnecting cables
  • Offers programmable controller with a selection of measurement modes, scan modes and output configurations
  • Available in array heights of 163 to 1951 mm
  • Provides 120 sensing beams per foot, for reliable detection of objects as small as 2.5 mm
  • Features a 2 m range with easy, forgiving alignment
  • Offers programmable blanking, hysteresis and serial communications
  • Includes advanced configuration software
Banner Lens Shields For LX Series Part-Sensing Light Screen Sensors Distributor
LX Series

Banner LX Series Sensors - For Sensing Small or Flat Parts at High Speeds

  • Generates a multiple-beam infrared pattern for extraordinary sensitivity to small objects
  • Detects objects as small as 5.6 mm and extremely flat objects that pass anywhere through the light screen
  • Responds in 0.8 to 3.2 milliseconds-faster than comparable products, even at its slowest response speed
  • Enables automated systems to operate at peak efficiency
  • Ideal for die-protection (part ejection verification), small part or pill counting, parcel handling and sorting by height
  • Available in 67, 143 or 295 mm lengths and two sensing ranges: 100 to 200 mm and 300 mm to 2 m
  • Features rugged silver anodized housing with IP65 rating
  • Uses integrated T-slot mounting channel for unique mounting flexibility
Banner MULTI-BEAM LS4 LS10 Light Screen System For Sensing Small Parts at High Speeds Distributors
LS4 & LS10 Series

Banner LS4 & LS10 Series Sensors

  • Array reliably senses small parts passing anywhere through the light screen
  • Sensing area measures 90 mm by up to 2.29 m (LS4 models)
  • Models vary in range and minimum object sensitivity
  • Sensor responds in 1 millisecond and includes built-in 5 millisecond output pulse stretcher
Banner BMLV Series BEAM-ARRAY Retroreflective Part Counting Light Curtains Distributor
BMLV BEAM-ARRAY

Banner BMLV Series - Retroreflective Part Counting Light Curtains

  • System is ideal for sensing or counting large objects falling through the sensing area.
  • Minimum object size is 50 mm at 0.6 m from the sensor and 125 mm at 2.1 m from the sensor.
  • Sensors are available in the following lengths: 1200, 2400, 3600 and 4800 mm.
  • Maximum range is 3 m, when used with Banner high-grade retroreflective tape.
  • Output choices are light operate and dark operate.
  • Housing is rugged extruded aluminum.
  • Installation and alignment are simple and fast.
Banner SC22-3E Safety Controllers Distributors
SC22-3E Safety Controllers

Banner SC22-3E Safety Controller

  • 22 input terminals can monitor both contact-based or PNP solid-state outputs from Banner devices or any other manufacturers
  • Each input can be a non-safety input, or configured for Control Reliability or Category 2, 3 or 4 safety circuit performance per ISO 13849-1
  • 3 pairs of solid-state safety outputs rated at 0.75A each (24V dc) with selectable one - or two-channel external device monitoring and ON-delay or OFF-dalay
  • 10 configurable auxiliary status outputs track inputs, outputs, lockout, I/O status and other functions
  • Easy configuration with built-in front panel LCD display or PC Interface
  • Live Display and a Fault Log provide real-time system and fault history identification
  • Controller is designed to meet stringent standards including Safety Integrity Level (SIL) 3 per IEC 62061 and IEC 61508, and Category 4 Performance Level (PL e) per ISO 13849-1

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Banner Safety Light Curtains enabling us to further assist you in finding the correct Banner Sensors for your application in the Pacific Northwest USA. We can proudly say that we carry more Banner Engineering Measuring Array Sensors in stock than any other Banner Engineering distributors in the Pacific Northwest region. Whether we have Banner A-GAGE EZ-ARRAY Light Curtains in stock in Boise, Idaho or need to get them from Banner Engineering; Clearwater Tech can get Banner Sensors to you fast and save money! It will be very helpful if you have the Banner Safety Light Curtains part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Banner EZ-ARRAY USB Serial Adapters that you are looking for in seconds. If you do not have the part numbers for Banner MINI-ARRAY Series Measuring Light Curtains, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Please be aware that we cannot sell Banner Sensors out of our Area of Primary Responsibility (APR).

EZ-SCREEN LP
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

USB Serial Adapters
BEAM ARRAY
EZ-SCREEN
Clearwater Tech   © 2012 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX