Clearwater Tech Logo
Home | Contact Us
(844) 331-9380


Home   >   Products   >   CONTRINEX AG   >   RFID

CONTRINEX (844) 331-9380       (888) 723-4773 (Fax)

Low Frequency

Contrinex low frequency RFID technology (125 kHz, operating frequency: 31.25 kHz) features not only conventional metal/PBTP components, but also a range of all-metal read/write modules and transponders in stainless steel. These devices have high resistance to mechanical shocks and are particularly well suited to difficult operating environments with exposure to harsh cleaning, chemicals, water.

  • All-metal components for aggressive operating environments
  • Embeddable transponders
  • Transponders can be written to and read through metal
  • Memory of transponders: 120 words, 16 bit each
  • Various transponder memory protection possibilities
  • Interface possibilities with bus RS485, PROFIBUS, DeviceNet and EtherNet/IP
  • USB adaptor
CONTRINEX Low-Frequency Radio Frequency Identification Systems (RFID) Distributors

If you are looking for CONTRINEX RFID, please call us on (844) 331-9380 or email us at we will do our best to help you find the CONTRINEX Low Frequency RFID that you are looking for at the most competitive prices possible. If you are searching for CONTRINEX High Frequency RFID technical information (data-sheets) please use the datasheets or product selection guide page links.

High Frequency

Contrinex high frequency RFID technology (13.56 MHz) is ISO/IEC 15693 compliant and therefore not limited to a specific manufacturer's transponders. Up to 253 R/W modules can be connected directly to an RS485 network. Fieldbus interfaces are available for connecting up to 32 RWMs. A Contrinex USB adaptor can connect a network of up to 10 RWMs for direct control by a PC. RWM address is selectable by potentiometer, or programmable with ConID HF software. Tags have 160 bytes of user memory in 40 blocks of 4 bytes each. Memory blocks can be password protected and an anticollision algorithm allows each RWM to recognize up to 5 TAGs. Read/write distances extend to 60 mm.

  • Networkable: direct connection to RS485 bus
  • Compatible with all ISO/IEC 15693 compliant TAGs
  • USB adaptor for a network of RWMs
  • Interfaces for PROFIBUS DP, DeviceNet, Ethernet/IP, PROFINET IO, EtherCAT
  • Temperature up to 125°C
  • Anticollision algorithm (up to 5 TAGs can be recognized in front of a RWM)
CONTRINEX High-Frequency Radio Frequency Identification Systems (RFID) Distributor


Our industrial automation supplies istributors warehouse in Boise, Idaho stocks some CONTRINEX products enabling us to further assist you in finding the correct high frequency RFID for your application in the USA.

Whether we have low frequency RFID in stock in Boise, Idaho or need to ship direct from CONTRINEX to any USA cities; Clearwater Tech can get CONTRINEX RFID products to you fast and save you money!

It will be very helpful if you have the CONTRINEX high frequency RFID part numbers ready, then our sales representatives can provide you with a pricing and availability quote for CONTRINEX low frequency RFID that you are looking for in seconds.

If you do not have the part numbers for CONTRINEX high frequency RFID, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.


Each Read/Write Head is also capable of processing the various types of data carriers in the TURCK line, regardless of whether it is an EEPROM or FRAM storage device - only one read/write head is required. The data carriers are available in diameters of 16, 20, 30 and 50 mm. The R20, R30 and R50 units are available with EEPROM or FRAM memory. Generally, the FRAM data carriers may be processed by a power of ten times faster than

Banner Lights

Stand-Alone Models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory