(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Contrinex photoelectric fork sensors are available in various sizes, and consequently suitable for a large range of applications. They feature a robust, compact and universally mountable housing. They work according to the principle of through beam sensors, replacing them whereever long operating distances are not required. Their advantage, compared to solutions with separate emitter and receiver, lies in their simple installation. Only one component has to be installed, there is no need for mechanical alignment, and the wiring is less demanding.

These devices are suitable for the whole field of assembly technology. The sensors are available with clocked or non-clocked light. Their features differ with respect to response time and ambient light limit. The very short response time permits safe detection at high target speeds, even of small parts. All devices are equipped with sensitivity adjustment.

If you are looking for CONTRINEX Through-Beam Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the CONTRINEX Thru-Beam Frame Switches that you are looking for at the lowest prices possible. If you are searching for CONTRINEX Thru-Beam Fork Sensors technical information (data-sheets) please use the CONTRINEX Datasheets OR Product Selection Guide page links.

Contrinex photoelectric frame sensors are available in various sizes, and consequently suitable for a large range of applications. They work according to the principle of through-beam sensors. A considerable number of emitters and receivers respectively are located on opposite sides of the frame, so as to cover the whole passage with a light curtain. The devices are used for the detection of small free-moving parts, e.g. for finished parts at the outlet of stamping machines or presses. They feature very robust, compact and universally mountable housings.

The devices can be switched between two operating modes, dynamic and static. In the former, only those parts that move through the active zone at a certain minimum speed are detected, whereas those that are permanently within the active zone, or that move slowly, are not. On the other hand, when in the static operating mode, all parts in the active zone, whether moving or not, are detected. Consequently, the length measurement of parts moving at a known speed through the active zone is possible. In addition, slowly falling perforated parts do not give rise to multiple pulses.

Contrinex Through-Beam Ring Sensors are available in three different sizes, and consequently suitable for a large range of applications. They feature a very robust, compact and universally mountable housing. They are used mainly in assembly technology for material-flow monitoring of small parts, such as screws, springs, plastic parts, etc, in transparent feeder tubes. The devices consist of an amplifier and a connectable sensing head, which contains several through-beam sensors. Consequently, small metallic and non-metallic parts from Ø 1 mm can be detected.

The sensing heads can be combined with dynamically or statically operating amplifiers. The advantage of the dynamic operating principle is that it does not require re-adjusting when the feeder tube is soiled or scratched. On the other hand, static amplifiers also detect non-moving parts, i.e. can for instance be used for monitoring jams. All amplifiers are equipped with sensitivity setting and adjustable pulse stretching.

Our CONTRINEX Sensor Distributors warehouse in Boise, Idaho stocks some CONTRINEX Thru-Beam Switch products enabling us to further assist you in finding the correct CONTRINEX Through-Beam Sensors for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico. Please follow Inductive Proximity Switches As Encoders page link to learn more about using a CONTRINEX Proximity Switch as an encoder.

Whether we have CONTRINEX Thru-Beam Fork Switches in stock in Boise, Idaho or need to ship direct from CONTRINEX to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); http://www.clrwtr.com can get CONTRINEX Frame Switches to you fast and save you money!

It will be very helpful if you have the CONTRINEX Thru-Beam Sensors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for CONTRINEX Through Beam Fork Sensor that you are looking for in seconds. If you do not have the part numbers for CONTRINEX Thru-Beam Frame Switches, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.