ABB Low Voltage

Sola Surge Protection

The SolaHD STC-PoE Series is designed to work on Cateogroy 5 PoE transmission lines as well as Category 6 applications. They feature both female to female and male to female RJ-45 connection options for ease of installation. Power over Ethernet is a technology for wired Ethernet LANs (Local Area Networks) that allows the electrical current to be carried by the data cables rather than power cords.

SymCom Remote Monitors

SymCom RM-2000 Coal Bed Methane Special / 777 combination optimizes gas production from coal bed methane wells while protecting the submersible pump. The 777 provides unmatched pump protection while the RM-2000 CBM Special cycles the pump based on pressure measurements from one or two 4-20 mA pressure transducers. Built-in flow meter and RTD signal conditioners provide low cost water output monitoring and blower control features.

ABB / Entrelec / Weidmuller

Home   >   Products   >   Circuit Breakers

ABB Low Voltage Controls

(800) 894-0412       (888) 723-4773 (Fax)

ABB S200 Miniature Breakers Distributor
ABB Low Voltage

The S2 series of ABB controls miniature circuit breakers offer a compact solution to protection requirements. The S2 devices are current limiting, DIN rail mounted and can offer a good equivalent to fused systems. The S2 is available with application-specific trip characteristics to provide maximum circuit protection. The breakers offer thermal-magnetic trip protection according to B, C, D, K and Z characteristics. For the worldwide market, ABB breakers carry UL, CSA, IEC, CE and many other agency approvals and certifications.

  • Current limiting
  • Fast breaking time (2.5 - 3.5 msec)
  • Unique bus connection system
  • Finger safe, Multi-Function terminals

If you are looking for Circuit Breakers, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the Miniature Circuit Breakers that you are looking for at the most competitive prices possible. If you are searching for Molded Case Circuit Breaker technical information (data-sheets) please use the Circuit Breaker Datasheets page link.


(800) 894-0412       (888) 723-4773 (Fax)

Weidmuller 9926 Series Breakers Distributor

Weidmuller's DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short circuits. Each circuit breaker has the ability to be reset without the need to change components. All circuit breakers are available with an assortment of jumpers and marking tags.

Weidmuller circuit breakers in the 9926 Series are UL 489 Listed and CSA Certified as branch rated protection devices under CSA 22.2 No. 5-02. The hydraulic magnetic trip mechanism offers 10,000A of interrupting capacity in 120V and 240V, 50/60Hz applications.

Altech Corporation

(800) 894-0412       (888) 723-4773 (Fax)

Altech L-Series UL 489 Miniature Molded Case Breaker Distributors
Altech Corporation

L-Series UL 489 Miniature Molded Case Circuit Breakers

  • Available in AC and DC models
  • DIN Rail Mounted
  • 17.5mm width
  • Thermal Magnetic
  • Electrical Ratings:
    • 0.2-63A / 240V AC, 50/60Hz
    • 0.2-32A / 480Y/277V AC, 50/60Hz
    • 0.2-63A/125/250V DC
  • 125VDC (1 pole); 250VDC (2pole)
  • 10kA Short Circuit Interrupting Capacity
  • Positive Trip indicator (Green - off/tripped, Red - on)
  • HACR Type 40°C
  • Line/Load reversible

(800) 894-0412       (888) 723-4773 (Fax)

IDEC NC1V Series DIN Rail Breakers Distributor

DIN rail mount with finger safe spring up screw terminals and trip current ratings up to 30A. Available in 1, 2 or 3 poles. Optional direct panel mount kit and Relay Voltage trip units available.

  • Slim, space-saving housing
  • Rated short-circuit capacity: 2500A
  • Trip current from 0.1A and up to 30A
  • Optional auxiliary / alarm contacts or inertia delay
  • 5 Tripping Delay Curves available
  • Spring-up, finger-safe (IP20) terminals reduce wiring time
  • Ring terminals can be installed. Captive terminal screws construction
  • Auxiliary/alarm contact terminals equipped with terminal covers
  • Retractable actuator provides flush / clean appearance and makes status easily visible
  • Safe trip free mechanism ensures circuit to remain open until trip condition is cleared and operator manually resets to off before switching to on

Our distributor warehouse in Boise, Idaho USA stocks some circuit protection products enabling us to further assist you in finding the correct Miniature Circuit Breakers in the USA. Whether we have Circuit Breakers in stock in Boise, Idaho USA or need to ship direct from the factory to any USA cities; Clearwater Tech can get Molded Case Circuit Breakers to you fast and save you some money! It will be very helpful if you have the Circuit Breaker part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Miniature Circuit Breakers that you are looking for in seconds. If you do not have the part numbers for Molded Case Circuit Breakers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

IDEC Corporation
Part Number:

Search Tips

Can't find a part number?
E-mail Us!

Altech Corporation
Moulded Case & Miniature Breaker