Clearwater Tech Logo
Home | Contact Us |
(800) 894-0412

Datalogic Group

Home   >   Products   >   Datasensor   >   Temperature Controllers

DATASENSOR Resistance Temperature Detectors

(800) 894-0412       (888) 723-4773 (Fax)

THE Series

The wide range of auxiliary functions available completes the excellent performances offered by the controllers of the E series, with standard 48x96 mm format and single and double display versions. The main PID control action adjusts itself automatically to the optimum parameters with the AT initial autotuning, or with the ADT permanent autoadaptive function; while the auxiliary outputs can be programmed on 16 different alarm functions or fixed points.

The LFA diagnostic function is able to detect failures along the entire regulation loop, from the sensor to the actuator; moreover the regulation can be either automatic (closed loop) or manual (open loop), setting the output percentual value. The complete programming of the controllers is made through the front panel, with the possibility of including a 3 level software safety lock.

Datasensor THE Series 1/8 DIN µP BasedTemperature Controllers Distributors
THE Series

If you are looking for Datasensor Temperature Controllers, please call us at (800) 894-0412 or Email us at we will do our best to help you find the Datalogic Thermocouples that you are looking for at the most competitive prices possible. If you are searching for Datasensor Resistance Temperature Detectors technical information (data-sheets) please use the datasheets or product selection guide page links.

The TH-T temperature controller series offers a complete range of solutions able to satisfy many varied industrial automation needs, including basic models suitable for more simple and cost-effective applications and advanced models created specifically for the more evolved control and interface systems. Programming of the temperature controllers is quick and easy as the most frequentlyused configurations can be set with few keyboard operations. Models with a RS485 serial interface can send the parameter configuration and receive the controlled values through an industrial PC that can control different units. Versions with a current transformer input, available as an accessory for measurements reaching 25 or 100 A, can detect even a partial load failure, as for example due to a broken heating element. The series includes models with opto-isolated relay and transistor outputs to control static relays, as well as models with 4-20 mA or 0-10 V normalised proportional analogue outputs.

Datalogic TH-TD & TH-TS Series Standard 1/16 DIN Basic & Advanced Temperature Controllers Distributor
TH-TD & TH-TS Series

QD/QS Series

The microprocessor-based controllers of the THQ series are characterised by remarkable regulation precision, in particular in heat-sealing and thermoforming operations typical of the automatic packaging.

The AT initial autotuning and the ADT permanent autoadaptive functions can both be activated through the PID control action, responding excellently to frequent or fast system variations, as for example in process start and stop. The panel with single or double display allows the setting of all the controller's values and configurations, such as sensor input, control action and alarm functions, with the possibility to lock the programming on three different safety levels.

The exclusive LFA diagnostic function is able to detect failures along the entire regulation loop, for example thermocouples short-circuit or heating resistance breaking.

Datasensor THQ Series 1/16 DIN µP Based Temperature Controllers Distributors
THQ Series

The analogue controllers of the LB series have been specifically designed to guarantee simple and immediate use, with optimal performances in all temperature control applications. The setting of the operating point is obtained by means of a knob on the scale graduated from 0 to 100, 200, 250, 300, 500 °C, according to the model with indications of the values also in °F. Different versions are available with input for Pt100 resistance temperature detectors and for J type Iron-Constantan thermocouples. The control action can be set as proportional or on/off by a jumper on the connection; the output is with a changeover relay and the power supply is 115/230 Vac. The dimensions, in the standard 48x48 mm format, are extremely compact and the mounting can be on panel using the fixing bracket supplied, or inside cabinet on a DIN rail socket.

  • Knob setting on dual °C and °F scale
  • Models for Pt100 and J thermocouples
  • Selectable proportional or on/off control action
  • 115/230 Vac versions with relay output
Datasensor LB Series 1/16 DIN Analog Temperature Controllers Distributor
LB Series

The TC/TR series offers thermocouple and RTD temperature sensors for measurements ranging from -100 to +450 °C, or up to 600 °C for the T101-J model. The J type (Iron/Constantan) or K type (Chromel/Alumel) thermocouples present a tubular stainless steel housing or with brass ring; the measurement junction is grounded in order to obtain the best response speed. The resistance temperature detectors are made with a Pt100O/0°C type platinium sensistive element and are available in different tubular housings, with chamfer point for penetration measurements, or holed for detection in open air; in stainless steel in all cases, with an insulated sensitive element. The thermocouples and the resistance temperature detectors of the TC/TR series are suitable for applications in automatic packaging, food sector, plastic material printing and wood working.

Datalogic TC/TR Series Thermocouple RTD Temperature Sensors Distributors
TC/TR Series

Whether we have THQ series controller in stock in Boise Idaho or need to ship direct from Datalogic Italy to any USA cities; Clearwater Tech can get E series controller to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some TH-TD series temperature controller products enabling us to further assist you in finding the correct LB series analog controller in the USA, Canada, or Mexico. It will be very helpful if you have the TC/TR series thermocouple part numbers ready, then our sales representatives can provide you with a pricing and availability quote for TH-TS temperature controller that you are looking for in seconds. If you do not have the part numbers for THQ series controllers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Leuze Sensors

The Compact GS 21 Series forked photoelectric sensor with a mouth width of 8 mm and a switching frequency of 1000 Hz is suitable for the detection of small parts and aperture discs. The design of these sensors makes them the ideal choice for the detection of small parts. High sensitivities and fast reaction times facilitate simple and reliable integration of these sensors in fast automation processes.


For 230°C Types, the amplifiers are built into an M12 stainless-steel housing, which is connected by means of a standard 3 m Teflon cable, and thus removed from the hot area. Stainless steel construction and sensing distances up to 25 mm minimize the risk of mechanical damage during operation, ensuring maximum plant availability and a highly attractive total cost of ownership. Contrinex high-temperature sensors are available in