EXERGEN

Home   >   Products   >   EXERGEN Industrial

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

The world's smallest IRt/c's are self powered, with K t/c output. For those special applications where mounting is impossible with standard sized sensors, the micro IRt/c can go places no other IR sensors have gone before, with the same high performance as all of the IRt/c products. Optics available are 1:2 (all temperature ranges available) and 4:1 (only calibrated for K-440F/220C). microIRt/c's have higher impedance than typical IRt/c's, Smart transmitters are available to linearize and deal with impedance issues.

• microIRt/c
• microIRt/c.SV
• microIRt/c.4
• microIRt/c.4SV

If you are looking for EXERGEN IRt/c Products, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the EXERGEN Temperature Sensors that you are looking for at the most competitive prices possible. If you are searching for EXERGEN Thermocouples technical information (data-sheets) please use the datasheets or product selection guide page links.

Exergen offers NIST traceable factory calibration of adjustable IRt/c sensors to meet the customers measurement range. This option simplifies multiple same sensor installations for factory automation and OEMs. mV signal output curves and mV tables are available.

• User calibrated to match user specific t/c output and temperature range
• Provides choice of optimized temperature ranges
• Available in range of FOV
• Includes focused models to view targets through tight openings
• Choice in emissivity range to match target material
• Conventional t/c output signals available (J, K, R/S, etc.)

The most reliable non contact temperature sensors on earth. No active electronics, so these passive devices can not fail. Mean Time Between Failure reports have been documented with a rate of > 1,000 years between failures.

• Factory-calibrated to match thermocouple signals over selected temperature ranges
• For non-metal surfaces (coated metals are acceptable)
• For use with "thermocouple input" controllers, PLCs, transmitters, and recorders available worldwide
• All sensors exceed NEMA 4, 4X; IP65, 67; and are intrinsically safe.

SmartIRt/c is plug and play, linearized, precise accuracy, with integral design which eliminates thermal drift. No leakage current, impedance, or cold junction compensation to worry about.

• Smart air purge assures maintenance free long term accuracy & smart continuous auto calibration
• All digital system & smart housing resists mechanical and thermal shocks
• Smart emissivity shift and ambient radiation correction & easy plug and play installation
• Lowest cost air purged, linearized sensor on the market & optics from 3:1 to 40:1 available
• Outputs of 0-5V, 0-10V, 4-20mA, & RS232
• Temperature ranges from 0-1000C
• LOW impedance, results in no offset errors due to leakage current in your input device
• Custom scaling and programming for low emissivity materials available

Reduce scrap in your manufacturing process. Detect the presence of hot objects (such as hot melt adhesive, labels, laser engravings, seals, and pressed fit parts) with the photo-cell like, thermally sensitive, fast thermal switch.

SnakeEye thermal switches can be used for non-contact infrared thermal detection, quality control / inspection & validation of production line processes which require a thermal component.

Now you can have 100% inspection of hot melt adhesive to your product, not only its presence, but its position as well. Employing new state-of-the-art infrared techniques (patent pending), the SnakeEye provides photocell simplicity of operation, with extraordinary thermal sensitivity to "see" each and every bead as it is applied in real time.

The DX-Series is an entirely different type of instrument than conventional temperature measuring devices. Designed specifically for the highest possible accuracy, it is the only infrared insturument which can be certified with NIST - traceble accurracy on real surfaces of unknown emissivity. while remaining completely free of the contact errors and heat sinking errors of contact devices.

The DX Thermometer is a necessary tool in any industry where accuracy in temperature measurement is required. particularly when the task speed or the process speed is important. This instrument will satisfy the most exacting demands, assuring quality, reliability and safety.

The Infrared Psychrometry method with the DSeries is a direct application of the thermodynamics and mathematics that defines humidity: the D-Series is capable of measuring the true wet-bulb temperature accurately, and with the dry-bulb temperature, the RH can be computed to a very high accuracy via standard psychrometric equations. The process is as follows:

A porous material (filter paper is suitable) is wetted with water (purity is not important), and air from the environment flows across the surface to bring the surface to thermodynamic equilibrium with the air, i.e. to the lowest possible temperature produced by the evaporating water, which is the wet-bulb temperature.

Why "shoot" at hot spots one shot at a time with an IR gun, when you can scan them with rapid automatic "fire"?

The palm-size EXERGEN Microscanner E and Super-E models are the infrared scanners which scan electrical equipment faster, safer and with more accuracy than point and shoot guns, because they are designed from the ground up for rapid electrical scanning - like using a machine gun instead of a pistol. Because of outstanding speed and color-coded display, EXERGEN E-Series models can scan twenty panels in the same time it takes to scan one panel with a conventional IR gun. Because of the higher optical resolution, scanning can be from farther away, thus improving safety for the professional.

The self powered EXERGEN IRt/c has advantages such as reliability, true t/c output (over certain ranges), hermetically sealed, small size, and intrinsically safe.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Exergen products enabling us to further assist you in finding the correct Exergen IR Thermocouples for your application in the USA, Canada and Mexico. Whether we have Exergen DX series in stock in Boise, Idaho or need to ship direct from Exergen Industrial to any USA cities; Clearwater Tech can get Exergen D series scanner to you fast and save money! It will be very helpful if you have the Exergen E series scanners part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Exergen Exertherm system that you are looking for in seconds. If you do not have the part numbers for Exergen adjustable IRt/c, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.