Clearwater Tech Logo
Home | Contact Us |
(800) 894-0412

FUJI Electric

Home   >   Products   >   General Electric   >   FRENIC-Mega Series

FUJI Electric

(800) 894-0412       (888) 723-4773 (Fax)

FRENIC-MEGA Series Drives

With the flexibility and functionality to support a wide range of applications on all types of mechanical equipment, the FRENIC-MEGA takes core capability, responsiveness, environmental awareness, and easy maintenance to the next level. FRENIC-MEGA is a high performance, multifunctional inverter FUJI Electric has developed by gathering the best of the technologies. With our own state of the art technology, the control performance has evolved to a new dimension.

FRENIC MEGA has been developed to use with variety of equipment by improving the basic performance, meeting the requirements for various applications, achieving lower maintenance and enhancing the resistant to the environmental impacts.

FUJI FRENIC-MEGA Series High Performance Multifunctional Inverters Distributors

If you are looking for FUJI Electric FRENIC-Mega Drives, please call us at (800) 894-0412 or email us at we will do our best to help you find the FUJI FRENIC-Mega Series VFDs that you are looking for at the most competitive prices possible. If you are searching for FUJI Electric FRENIC-Mega Inverters technical information (data-sheets) please use the datasheets or product selection guide page links.

FRENIC-MEGA, the inverter with the highest performance in the industry, is about to redefine the common sense of general purpose inverters. Now, it's ready to answer your needs. FRENIC MEGA is the new High Performance inverter from Fuji Electric and is the successor of G11S drive. The capacity range of FRENIC MEGA is for 3 ph 400 V supply from 0.4 kW to 630 kW and for 3 ph 200 V supply from 0.4 kW to 110 kW. The overload capacity of FRENIC MEGA is 150% for 1 min and 200% for 3s (in High Duty mode). The inverters with capacities of 5.5 kW and above can be used in dual rating; this means that the same inverter can be used for next higher capacity (in Low Duty mode). For example a 5.5 kW inverter can be used for a 7.5 kW motor; in this case the overload is 120% for 1 min. The braking transistor is included as standard up to 22 kW units and is optional up to 110 kW units. The braking resistor is included as standard up to 7.5 kW units.

The main features of FRENIC MEGA are:

  • Safety enable input (compliant to EN954-1 category 3)
  • Built-in EMC filter for all capacities (compliant to EN 61800-3, category C3)
  • Sensorless vector control mode (100% torque at 0 Hz)
  • Advanced PID functions (dancer control)
  • Brake control function
  • Logic gates for logic combination of input and output functions and delay timer (10 steps)
  • Positioning function (when encoder option is used)
  • 3 slots for 3 different options at the same time (encoder, fieldbus, I/O expansion)
  • Removable control terminals (cage clamp type)

The available options of FRENIC MEGA are:

  • External EMC filter (footprint up to 22 kW) for higher EMC compliance (EN 61800-3, category C2)
  • Basic LED keypad with built-in USB port and copy function (1 complete function set, operation, maintenance and alarms information)
  • Advanced LCD/LED keypad with clear text description and copy function (3 complete function sets)
  • Encoder option for HTL encoder
  • Encoder option for line driver encoder
  • FieldBus options for: ProfiBus, DeviceNet, CANopen, Ethernet I/P, CC-Link and T-link.
  • Analog inputs/outputs expansion card
  • Digital I/O expansion card

The OPC-G1-ETH is a user-configurable multiprotocol Ethernet communications interface card for the Fuji Electric FRENIC-Mega family of adjustable speed drives. The OPC-G1-ETH installs directly onto the drive, and provides connectivity to several popular Ethernet-based automation networks. Once installed, the OPC-G1-ETH provides Ethernet/internet access to all internal drive configuration, command and monitoring function codes. All interface card configuration is performed using a standard web browser, and all supported protocols can be active simultaneously. Supported protocols currently include:

  • Modbus/TCP
  • EtherNet/IP (for connectivity to Allen-Bradley Logix and equivalent platforms)
  • Allen Bradley CSP (for connectivity to Allen-Bradley PLC-5/E and SLC-5/05 class PLCs)
  • BACnet/IP
FUJI FRENIC-MEGA Ethernet Option Card OPC-G1-ETH Distributor
Ethernet Option Card

Basic Type Specifications

Standard Applied Motor [kw] 3-Phase 400V Series 3-Phase 200V Series
HD Spec (150%) LD Spec (120%) HD Spec (150%) LD Spec (120%)
0.4 FRN0.4G1S-4* - FRN0.4G1S-2* -
0.75 FRN0.75G1S-4* - FRN0.75G1S-2* -
1.5 FRN1.5G1S-4* - FRN1.5G1S-2 -
2.2 FRN2.2G1S-4* - FRN2.2G1S-2* -
3.7 FRN3.7G1S-4* - FRN3.7G1S-2* -
5.5 FRN5.5G1S-4* - FRN5.5G1S-2 -
7.5 FRN7.5G1S-4* FRN5.5G1S-4* FRN7.5G1S-2* FRN5.5G1S-2*
11 FRN11G1S-4* FRN7.5G1S-4* FRN11G1S-2* FRN7.5G1S-2*
15 FRN15G1S-4* FRN11G1S-4* FRN15G1S-2* FRN11G1S-2*
18.5 FRN18.5G1S-4* FRN15G1S-4* FRN18.5G1S-2* FRN15G1S-2*
22 FRN22G1S-4* FRN18.5G1S-4* FRN22G1S-2* FRN18.5G1S-2*
30 FRN30G1S-4* FRN22G1S-4* FRN30G1S-2* FRN22G1S-2*
37 FRN37G1S-4* FRN30G1S-4* FRN37G1S-2* FRN30G1S-2*
45 FRN45G1S-4* FRN37G1S-4* FRN45G1S-2* FRN37G1S-2*
55 FRN55G1S-4* FRN45G1S-4* FRN55G1S-2* FRN45G1S-2*
75 FRN75G1S-4* FRN55G1S-4* FRN75G1S-2* FRN55G1S-2*
90 FRN90G1S-4* FRN75G1S-4* FRN90G1S-2* FRN75G1S-2*
110 FRN110G1S-4* FRN90G1S-4* - FRN90G1S-2*
132 FRN132G1S-4* FRN110G1S-4* - -
160 FRN160G1S-4* FRN132G1S-4* - -
200 FRN200G1S-4* FRN160G1S-4* - -
220 FRN220G1S-4* FRN200G1S-4* - -
280 FRN280G1S-4* FRN220G1S-4* - -
630 FRN630G1S-4* FRN500G1S-4* - -
710 - FRN630G1S-4* - -
* in the above table replaces A, E or T depending on the enclosure. A: Asia E: EU T: Taiwan

EMC Filter Built-In Type

Standard Applied Motor [kw] 3-Phase 400V Series 3-Phase 200V Series
HD Spec (150%) LD Spec (120%) HD Spec (150%) LD Spec (120%)
0.4 FRN0.4G1E-4* - FRN0.4G1E-2* -
0.75 FRN0.75G1E-4* - FRN0.75G1E-2* -
1.5 FRN1.5G1E-4* - FRN1.5G1E-2 -
2.2 FRN2.2G1E-4* - FRN2.2G1E-2* -
3.7 FRN3.7G1E-4* - FRN3.7G1E-2* -
5.5 FRN5.5G1E-4* - FRN5.5G1E-2 -
7.5 FRN7.5G1E-4* FRN5.5G1E-4* FRN7.5G1E-2* FRN5.5G1E-2*
11 FRN11G1E-4* FRN7.5G1E-4* FRN11G1E-2* FRN7.5G1E-2*
15 FRN15G1E-4* FRN11G1E-4* FRN15G1E-2* FRN11G1E-2*
18.5 FRN18.5G1E-4* FRN15G1E-4* FRN18.5G1E-2* FRN15G1E-2*
22 FRN22G1E-4* FRN18.5G1E-4* FRN22G1E-2* FRN18.5G1E-2*
30 FRN30G1E-4* FRN22G1E-4* FRN30G1E-2* FRN22G1E-2*
37 FRN37G1E-4* FRN30G1E-4* FRN37G1E-2* FRN30G1E-2*
45 FRN45G1E-4* FRN37G1E-4* FRN45G1E-2* FRN37G1E-2*
55 FRN55G1E-4* FRN45G1E-4* FRN55G1E-2* FRN45G1E-2*
75 FRN75G1E-4* FRN55G1E-4* FRN75G1E-2* FRN55G1E-2*
90 FRN90G1E-4* FRN75G1E-4* FRN90G1E-2* FRN75G1E-2*
110 FRN110G1E-4* FRN90G1E-4* - FRN90G1E-2*
132 FRN132G1E-4* FRN110G1E-4* - -
160 FRN160G1E-4* FRN132G1E-4* - -
200 FRN200G1E-4* FRN160G1E-4* - -
220 FRN220G1E-4* FRN200G1E-4* - -
280 FRN280G1E-4* FRN220G1E-4* - -
630 FRN630G1E-4* FRN500G1E-4* - -
710 - FRN630G1E-4* - -
* in the above table replaces A, E or T depending on the enclosure. A: Asia E: EU T: Taiwan

Whether we have FUJI Electric VFDs in stock in Boise, Idaho or need to ship direct from Fuji Electric Corp. of America (FECOA) to any USA cities; Clearwater Tech can get FUJI Electric Inverters to you fast and save you some money! Our industrial factory automation supplies distributors warehouse stocks some FUJI Electric Inverter products enabling us to further assist you in finding the correct FUJI FRENIC-Mega Series Drives in the USA, Canada, or Mexico. It will be very helpful if you have the FRENIC Inverter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for FUJI FRENIC-Mega Series Micro Drives that you are looking for in seconds. If you do not have the part numbers for FUJI FRENIC-Mega Series VFDs, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us!

WEG Drives

New generation of WEG frequency inverters for high power ratings, consisting of power units fed through a 6 or 12 pulse input retifier with line voltage from 380 to 690V. The modularity concept intitled by inserting power units "books", according to the application demands, makes the CFW-11M suitable for all range of power meeting Normal Duty and Heavy Duty requirements and it increases the VSD reliability as well.

Toshiba Starters

This State-of-the-Art Controller was designed in Houston, Texas, and is currently being manufactured under ISO 9001 standards in the same manufacturing facility as Toshiba motors and drives. The components in this new series have been arranged in the most logical manner to produce a tightly designed unit, and in the full voltage type starters, uses no internal power cables. This streamlined,