Hammond Manufacturing

Home   >   Products   >   Hammond   >   Stainless Steel   >   Enclosures

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.

Standards

• UL 508 Type 4 and 12 as marked
• CSA Type 4 and 12
• Complies with
  • NEMA Type 4, 12 and 13
  • JIC EGP-1-1967
  • IEC 529, IP66

If you are looking for Hammond Stainless Steel Enclosures, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Hammond 1590ZGRP Series Polyester Modular Enclosure that you are looking for at the most competitive prices possible. If you are searching for Hammond Manufacturing PJ Series Polyester Modular Enclosures technical information (data-sheets) please use the datasheets or product selection guide page links.

Application

• Designed for use as electronic instrument enclosures, electrical junction boxes or terminal wiring enclosures.

Standards

• Complies with
  • IP65

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.
• For high temperature applications, a gasket retainer may be required, please refer to factory.

Standards

• UL 508 Type 3R, 4, 4X, and 12
• CSA Type 3R, 4, 4X, and 12
• Complies with
  • NEMA Type 3R, 4, 4X, 12 and 13
  • JIC EGP-1-1967
  • IEC 529, IP66

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a problem.

Standards

• UL 508 Type 4 and 12
• CSA Type 4 and 12
• Complies with
  • NEMA Type 4, 12 and 13
  • IEC 529, IP66

Construction

• Aluminum diecast G AI SI 12 / DIN 1725, Leg 230.
• Captive stainless steel lid screws are standard.
• Neoprene oil and petrol resistant gasket standard.
• Temperature range -30°C to +100°C (-22°F to +212°F).
• Single-channel Fastening System. Trouble-free turning 90° to 90° with square enclosures by synchronous arrangement of channels.

Standards

• Complies with
  • IP65
  • EN 60529

Application

• Designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection ratings.
• Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
• A wide range of sizes and practical accessories make this product line a complete package.
• For high temperature applications, a gasket retainer may be required, please refer to factory.

Standards

• UL 508 Type 3R, 4, 4X, and 12
• CSA Type 3R, 4, 4X, and 12
• Complies with
  • NEMA Type 3R, 4, 4X, 12 and 13
  • IEC 529, IP66

Application

• Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
• Sloped top prevents water from resting on top as well as providing potential for controls mounting
• Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
• A wide range of sizes and practical accessories make this product line a complete package.
• For high temperature applications, a gasket retainer may be required, please refer to factory.

Standards

• UL 508 Type 3R, 4, 4X and 12
• CSA Type 3R, 4, 4X and 12
• Complies with
  • NEMA 3R, 4, 4X, 12 and 13
  • IEC 60529, IP 66

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneu­matic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X,12 and 13
  • IEC 60529, IP66

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X, 12 and 13
  • IEC 60529, IP66

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X,12 and 13
  • IEC 60529, IP66

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X,12 and 13
  • IEC 60529, IP66

Application

• Designed to house Industrial control, instrumentation, pneumatic, valve and pump control systems.
• Excellent protection against corrosion and ultra violet rays making this a suitable enclosure for outdoor installations.
• High resistance to impact and temperature for industrial installations when subjected to frequent water exposure.

Standards

• UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 & 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
  • IEC 60529, IP 66

Application

• These enclosures are specially designed to accomodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
• For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.

Standards

• UL 508 1, 3, 3R, 4, 4X, 12
• CSA 1, 3, 3R, 4, 4X, 12
• Complies with
  • NEMA 1, 3, 3R, 4, 4X, 12
  • IEC 60529, IP 66

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.

Standards

• UL 508 Type 3R, 4, 4X, and 12
• CSA Type 3R, 4, 4X, and 12
• Complies with
  • NEMA Type 3R, 4, 4X, 12 and 13
  • JIC EGP-1-1967
  • IEC 60529, IP66

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
• A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.

Standards

• UL 508 Type 3R, 4 and 12
• CSA Type 3R, 4 and 12
• Complies with
  • NEMA Type 3R, 4, 12 and 3
  • IEC 60529, IP66

Application

• Designed for use as instrument enclosures, electrical junction boxes or terminal wiring enclosures.
• Provide outstanding protection against dust, oil and pressurized water.
• Impervious to atmospheric and marine corrosion.

Standards

• VO Flammability Rating
• Complies with
  • NEMA 1, 2, 3, 3R, 4, 4X, 5, 12, 13
  • IEC 60529, IP66

Application

• Designed for use as insulated instrument enclosures, electric, control housings, electrical junction boxes or terminal wiring enclosures.
• Transparent cover provides visibility of inner components without exposure to the environment.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.
• High UV resistance is ideal for outdoor installations.

Standards

• UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 & 13
• Complies with
  • NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
  • IEC 60529, IP66

Features

• Molded in grey, glass reinforced polyester.
• Heavy duty, thick wall design.
• Includes gasketed lid with two piece "tongue and groove" construction.
• Gasket material is Mohogumi rubber (EDPM.) Heat resistance 100-120 degree C, cold -40 degree C.
• Designed to meet IP65.
• North American Mark of Safety - cUL & UL listed. Certified to Nema 4X standards (UL508)

Construction

• Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components.
• The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use.
• Lid and mounting holes are located outside of the gasket seal.
• Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly).
• Heavy duty 16 gauge galvanized steel panels available

Standards

• IP66
• NEMA 4, 4X, 12 & 13
• UL94 5V

Accessories

• Eclipse Series
• Polyester Modular

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Hammond Manufacturing products enabling us to further assist you in finding the correct 1414 N4 AL aluminum series enclosure for your application in the USA. Whether we have 1590Z diecast aluminum series enclosure in stock in Boise, Idaho or need to ship direct from Hammond Manufacturing to any USA cities; Clearwater Tech can get R100 diecast aluminum series enclosure to you fast and save money! It will be very helpful if you have the 1418 series single door enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Eclipse junior series stainless steel enclosure that you are looking for in seconds. If you do not have the part numbers for 1414 N4 PHSS series 304 enclosure, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.