Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
September 25, 2007

Red Lion Counter

The Red Lion Controls CUB5 counter provides the user the ultimate in flexibility, from its complete user programming to the optional relay output capability. The meter can be programmed as a single or dual counter with rate indication capability. The display can be toggled either manually or automatically
Red Lion Counters

ABB Breakers

The Miniature ABB Controls Circuit Breakers (MCBs) have replaced fuses in low voltage installations for buildings in many countries up to a rate of 95%. The task of the Miniature ABB Circuit Breaker is to act as protection against overcurrent or short circuit, thus ABB MCB providing protection against overheating,
ABB Circuit Breakers

Home   >   Products   >   Hammond   >   Enclosures

Hammond Enclosure Type NEMA, UL, CSA Cross Reference Guide

Hammond Enclosures was founded in 1917 in Guelph, Ontario, Canada. The explosive demand for electrical enclosure products of all kinds during the 1950's and 1960's created many opportunities for new products. Operating from facilities in Canada, the United States and Europe, Hammond Enclosures offer a broad range of standard products. The maintenance of a correct operating temperature may combine both cooling and or heating inside a Hammond enclosure which can protect against costly down time and system failures. Some components today require both cooling and heating in the same Hammond enclosure.

If you are looking for Hammond Enclosures, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Hammond Enclosures that you are looking for at the lowest prices possible. If you are searching for Hammond Enclosure technical information (data-sheets) please use the Hammond Datasheets or Product Selection Guide page links.

Non-Hazardous Enclosures

Type National Electrical Manufacturers' Association (NEMA Standard 250) Underwriters' Laboratories Inc. (UL 50 & UL 508) Canadian Standards Association (Standard C22.2, Nos. 14, 40, & 94)
1

Enclosures constructed for indoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment to provide a degree of protection against falling dirt.

Indoor use primarily to provide a degree of protection against limited amount of falling dirt.

General purpose enclosure in ordinary locations.

2

Enclosures constructed for indoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment, to provide a degree of protection against falling dirt, and to provide a degree of protection against dripping and light splashing of liquids.

Indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt.

An enclosure for Indoor use, constructed so as to provide a degree of protection against dripping and light splashing of noncorrosive liquids, and falling dirt.

3

Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with enclosed equipment to provide a degree of protection against falling dirt, rain,sleet, snow and windblown dust and that will be undamaged by the external formation of ice on the enclosure.

Outdoor use primarily to provide a degree of protection against rain, sleet, windblown dust, and damage from external ice formation.

An enclosure for either indoor or outdoor use, constructed so as to provide a degree of protection against rain, snow, and windblown dust; undamaged by the external formation of ice on the enclosure.

3R

Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with enclosed equipment to provide a degree of protection against falling dirt, rain, sleet, snow and that will be undamaged by the external formation of ice on the enclosure.

Outdoor use primarily to provide a degree of protection against rain, sleet; and damage from external ice formation.

An enclosure for either indoor or outdoor use, constructed so as to provide a degree of protection against rain, and snow, undamaged by the external formation of ice on the enclosure.

4

Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment: to provide a degree of protection against falling dirt, rain, sleet, snow, windblown dust, splashing water, hose directed water, and hosedirected water; and that will be undamaged by the external formation of ice on the enclosure.

Indoor or outdoor use primarily to provide a degree of protection against windblown dust, and rain, splashing water, hose-directed water;and damage from external ice formation.

An enclosure for either indoor or outdoor use, constructed so as to provide a degree of protection against rain, snow, windblown dust, splashing and hose-directed water; undamaged by the external formation of ice on the enclosure.

4X

Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment; to provide a degree of protection against falling dirt, rain, sleet, snow, windblown dust, splashing water, hose-directed water, and corrosion; and that will be undamaged by the external formation of ice on the enclosure.

Indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, hosedirected water; and damagefrom external ice formation.

An enclosure for either indoor or outdoor use, constructed so as to provide a degree of protection against rain, snow, windblown dust, splashing and hose-directed water; undamaged by the external formation of ice on the enclosure; resists corrosion.

12

Enclosures constructed (without knockouts) for indoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment; to provide a degree of protection against falling dirt; against circulating dust, lint and fiber flyings; and against dripping and light splashing of liquids.

Indoor use primarily to provide a degree of protection against circulating dust, falling dirt, and dripping non-corrosive liquids.

An enclosure for indoor use, constructed so as to provide a degree of protection against circulating and settling dust and lint, fibre flyings; dripping and light splashing of non-corrosive liquids; not provided with knockouts.

13

Enclosures constructed for indoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment; to provide a degree of protection against falling dirt; against circulating dust, lint and fiber flyings; and against the spraying, splashing , and seepage of water, oil, and noncorrosive coolants.

Indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolant.

An enclosure for indoor use, constructed so as to provide a degree of protection against circulating and settling dust, lint and fibre flyings; seepage and spraying of noncorrosive liquids including oils and coolants.

Note: The specifications on this page are for comparative reference only and are not intended to provide the complete requirements or test qualifications published by various associations and agencies. Complete information may be obtained by contacting the appropriate organization. If you are looking for a cross reference guide for Hoffman Enclosures, please use Hoffman to Hammond Cross Reference.

Hammond Manufacturing can easily cross their competitor products such as Carlon Enclosures, Hoffman Enclosures, and Stahlin Enclosures and provide you with a competitive price and availability quote. Our Hammond Enclosures distributors warehouse in Boise, Idaho stocks some Hammond Enclosure products (Hammond Enclosures Plastic Electrical Industrial Stainless Steel Disconnect Hammond Manufacturing Enclosure Distributors) enabling us to further assist you in finding the correct Hammond Industrial Enclosure for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have Hammond Enclosures in stock in Boise, Idaho or need to ship direct from Hammond Enclosure to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.clrwtr.com can get Hammond Enclosures to you fast and save money!

It will be very helpful if you have the Hammond Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Hammond Manufacturing Enclosures that you are looking for in seconds. If you do not have the part numbers for Hammond Enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible. You can find Information Specific to Hammond Enclosures here.

Clearwater Tech Site Usage Policy
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Hammond Enclosures Types NEMA, UL, CSA Cross Reference Guide
Clearwater Tech   © 2007 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX