June 30, 2011
Saginaw Enclosures
Type 4X fiberglass cabinets from Saginaw are designed for indoor or outdoor use to
house electronic controls, instruments and components in areas that may be regularly hosed down, in very wet conditions, or
are exposed to corrosive agents. These enclosures provide protection from corrosion, wind blown dust, rain, spraying water,
hose directed water and ice formation on the enclosure.
|
Weidmuller Enclosures
The Klippon TB Housing Series
features excellent performance characteristics, even under the most difficult environmental surroundings. And it meets the
stricter requirements of explosive-risk zones found in the process or power generation industries. The new Klippon TB MH
housing series offers further improvements to a product line that is already successfully leading the market.
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
1414 Series |
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes
or terminal wiring enclosures.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508 Type 12 and 13
- CSA Type 12 and 13
- Complies with
- NEMA Type 12 and 13
- JIC EGP-1-1967 unless marked
- IEC 529, IP65
|
|
If you are looking for Hammond Industrial Enclosures, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Hammond 1422 Series Two Door Floormount Enclosures that you are looking for at the
most competitive prices possible. If you are searching for HN4 Series Two Door Floormount Enclosure technical information
(data-sheets) please use the datasheets or product selection guide page links.
|
1418 Series |
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes
or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full
weather protection.
Standards
- UL 508 Type 3R,12, 4
- CSA Type 3R, 12, 4
- Complies with
- NEMA Type 3R, 4, 12 and 13
- JIC EGP-1-1967 unless marked
- IEC 529, IP66
|
Eclipse Series |
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for
wallmount applications.
- Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to
any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
- For high temperature applications, a gasket retainer may be required, please refer to factory.
Standards
- UL 508 Type 3R, 4, and 12
- CSA Type 3R, 4, and 12
- Complies with
- NEMA Type 3R, 4, and 12
- IEC 60529, IP66
|
1422 Series |
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508 Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 529, IP65
|
1436/1438 Series |
Application
- Designed for use as instrument enclosures, electrical junction boxes or terminal wiring enclosures.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508 Type 12 and 13
- CSA Type 12 and 13
- Complies with
- NEMA Type 12 and 13
- IEC 529, IP65
|
Eclipse Junior Series |
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments.
- For use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or
terminal wiring enclosures.
- Impressive styling features make the Eclipse Junior a suitable addition to any high-tech equipment installation.
- For high temperature applications, a gasket retainer may be required, please refer to factory.
Standards
- UL 508 Type 3R, 4, 12 and 13
- CSA Type 3R, 4, 12 and 13
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 529, IP66
|
HN4 Series |
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or
rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where
corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in
mounting arrangements.
Standards
- UL 508 Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
|
Accessories |
Accessories
- Eclipse Series - NEMA 4, 12
- 1418 Series Freestanding Enclosures - NEMA 4, 12
- Series 2000 - NEMA 4
|
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Hammond
Manufacturing products enabling us to further assist you in finding the correct Eclipse Junior series single door
enclosure NEMA 12, 13, 4 for your application in the USA. Whether we have 1414 series enclosure clamped, lift-off cover NEMA
12, 13 in stock in Boise, Idaho or need to ship direct from Hammond Manufacturing to any USA cities, Clearwater Tech can get
1414 N4 PH series enclosure continuous hinge, clamped cover NEMA 12, 13, 4 to you fast and save money! It will be very helpful
if you have the 1414 SC series enclosure lift-off, screw cover NEMA 12, 13 part numbers ready, then our sales representatives
can provide you with a pricing and availability quote for 1436/1438 series junction boxes lift-off, screw cover NEMA 12, 13
that you are looking for in seconds. If you do not have the part numbers for 1418J series NEMA 12, our application engineers
will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
