May 06, 2010
Saginaw Enclosures
Type 12 operator systems are designed to house a wide variety of equipment; panel
mount, rack mount, desktop PC's, industrial monitors, keyboards and panel views. These enclosures are primarily used in an
indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of
water.
|
BUD Racks
Bud Industries' double racks offer the ideal solution when full, natural ventilation
and a strong four-point mounting system is required, but without the need for the security offered by a full cabinet rack.
Offered in the standard 84" height and in three commonly used depths.
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 2000 Series |
Application
- Serves as an economical housing for Operator Interface Applications.
- Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
- Provides panel mounting capabilities for a variety of applications. Generally used as a stand alone enclosure.
Possible to put side by side with base on a single plinth (ie. 36" wide consolet with 24" base with terminal all
together on a 60" plinth.
- Optional casters (require plinth) allow for a completely mobile, NEMA rated work station.
- Smooth lines and clean edges provide an attractive, contemporary appearance.
Standards
- UL 508 Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
|
|
If you are looking for Hammond Operator Interface Enclosures, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Hammond Manufacturing Modular Console Systems that you are looking for at the lowest
prices possible. If you are searching for Hammond Pushbutton Enclosure technical information (data-sheets) please
use the Hammond Operator Interface Enclosure Datasheets OR
Product Selection Guide page links.
|
 Push Button |
Application
- Designed to accept 22mm miniature oil tight pushbuttons, switches and pilot lights.
- Provides protection from dirt, dust, oil and water.
Standards
- UL 508 Type 12 and 13
- CSA Type 12 and 13
- Complies with
- NEMA Type 12 and 13
- JIC EMP-1-1967
- JIC EGP-1-1967
- IEC 60529, IP54
|
 1488 Series |
Application
- Designed for use as electric, hydraulic or pneumatic control and instrument enclosures.
- Ideal for flat or surface mounting/pedestal to provide the necessary 30° or 60° control slope.
- Provides protection from dirt, dust, oil and water.
Standards
- UL 508 Type 12, 13
- CSA Type 12, 13
- Complies with
- NEMA Type 12, 13
- IEC 60529, IP54
|
 1471 Series |
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Heavy-duty construction provides protection from dirt, dust, oil and water.
- Sloping front control panel provides an ideal surface for mounting operator controls or instrumentation.
- Interior mounting provision on removable inner panels located on the rear and sides of the enclosure.
Standards
- UL 508 Type 12 as marked
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
|
 1472 Series |
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Heavy-duty construction provides protection from dirt, dust, oil and water. Sloping front control and instrument
panels provide an ideal surface for mounting operator controls or instrumentation.
- Interior mounting is provided for with a removable inner panel located on the rear of the basic console.
Standards
- UL 508 Type 12 as marked
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP65
|
 Eclipse Series |
Application
- Designed to enclose electronic controls, instruments and components in indoor environments where dirt, dust, oil and
water may be present.
- Ideal for use with suspension systems.
- Multiple mounting provisions and full front mounting space provide for ideal operator interface.
- Smooth flush surfaces and attractive finishes compliment high tech equipment.
Standards
- UL 508 Type 12
- CSA Type 12
- Complies with
- NEMA Type 12 and 13
- IEC 60529, IP54
|
|
|
Our Hammond Manufacturing distributors warehouse in Boise, Idaho stocks some Hammond products enabling us to
further assist you in finding the correct Hammond Push Button Enclosures for your application in the USA. Whether we have Hammond
Operator Interface Enclosures in stock in Boise, Idaho or need to ship direct from Hammond Manufacturing to any USA cities,
Clearwater Tech can get Hammond Console Cabinets to you fast and save money! It will be very helpful if you have the Hammond
Operator System Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote
for Hammond Manufacturing Pushbutton Enclosures that you are looking for in seconds. If you do not have the part numbers for
Hammond Modular Console Systems, our application engineers will be able to help you figure out the part numbers and get the price
quote to you as soon as possible.
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|