Clearwater Tech Logo
Home | Contact Us
(844) 331-9377

IDEC Corporation

Home   >   Products   >   IDEC   >   8mm   >   Switches & Pilot Devices


(844) 331-9377       (888) 723-4773 (Fax)

A8 Series

The A8 series of switches and pilot devices offer the extreme in space savings. With only an 8mm panel cutout, they are ideal for high density or very small control panels such as handheld devices. Low level snap acting contacts are ideal for PLC inputs, timer triggers, sensor triggers, or any other type of logic level switching. LED lamps are replaceable unlike most other switches and pilot lights of similar size. With a choice of round square or rectangular button heads, 5 colors, and either momentary or maintained (push-on/push-off) action there is sure to be a model to meet your needs.

Key Features:

  • 8mm round mounting hole
  • Choice of round, square or rectangular bezels
  • Gold-clad silver snap action contacts for reliable low-level switching
  • LED illumination
  • IP40 degree of protection (dustproof)
  • UL recognized, CSA certified
IDEC A8 Series 8mm Miniature Switches & Pilot Devices Distributor

A8 Series

If you are looking for IDEC 8mm Switches & Pilot Devices, please call us on (844) 331-9377 or email us at we will do our best to help you find the IDEC IZUMI A8 Series Switches that you are looking for at the most competitive prices possible. If you are searching for IDEC A8 Series Pilot Devices technical information (data-sheets) please use the datasheets or product selection guide page links.

AP Series

The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 5V DC, 12V AC/DC or 24V AC/DC; there are also optional snap-on transformers and a DC-DC converter to support higher voltages.

Key Features:

  • 8mm, 10mm, 12mm, and 16mm round panel cutouts
  • Super bright LEDs, Dome or flat lenses
  • Built-in current-limiting resistor and reverse polarity protection diode
  • Five illumination colors: red, green, amber, yellow, and white
  • AC adaptor (120V AC and 240V AC) and DC-DC converter (110V DC) options on 12mm and 16mm units
  • NEMA 4x degree of protection (watertight/oiltight)
  • UL Recognized, CSA Certified
IDEC 8mm & 16mm AP Series Miniature Pilot Lights Distributor

AP Series

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC products enabling us to further assist you in finding the correct IDEC AP Series pilot lights for your application in the USA, Canada and Mexico. Whether we have miniature pilot lights in stock in Boise, Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get A8 Series switch to you fast! It will be very helpful if you have the A8 Series pilot device part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IDEC AP Series pilot light that you are looking for in seconds. If you do not have the part numbers for miniature pilot lights, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Red Lion Displays

The LDA Displays are 5 digit large displays capable of accepting DC current, process or voltage input signals and scaling them to the desired readout. Two models are available in either 2.25" or 4" high red LED digits, with user adjustable display intensities. The 2.25" high models are readable up to 130 feet. The 4" high models are readable up to 180 feet. Both versions offer setpoint control with dual Form C relay outputs and

Weidmuller Modules

Metal Oxide Varistors are used in the terminal design. They are approved for the maximum sinusoidal operating ac voltage indicated on the component. Any voltage exceeding the stated voltage is discharged safely. Varistors can be used for medium to large ratings. The gas charge eliminator consists of two electrodes spaced a defined distance apart, enclosed in a small glass or ceramic tube. Between the electrodes is an inert gas (usually Argon or Neon) at