SX5A Series
Safety Monitor
Communication Terminal
Repeater

Weidmuller Distributors

M12 Push-Pull is the new connection system for sensors and actuators. It is downward compatible to the existing M12 system, which means that both old M12 and new M12 Push-Pull lines can be used together on these SAIs. M12 Push-Pull decreases installation time and increases installation safety by means of colour coding and provides an audible click on locking for added reassurance.

Red Lion Thermocouples

The Conversion to a current output signal makes the ITMA less susceptible to noise interference and allows accurate transmission over long distances. The 2-Way isolation allows the use of grounded thermocouples which can provide additional noise reduction benefits. The ITMA uses a ten position DIP switch to accomplish the input sensor configuration, range selection, and unit calibration. A simple range setting technique (Field Calibration) is used so

IDEC IZUMI

Loading

Home   >   Products   >   IDEC   >   AS-i Safety

IDEC IZUMI

(844) 331-9377       (888) 723-4773 (Fax)
info@clrwtr.com

IDEC AS-Interface SX5A Safety Communication Terminals Safety Monitors Distributors
SX5A AS-i Safety Terminals & Monitors

The SX5A Safety monitor allows you to easily connect AS-Interface safety products to an existing AS-Interface network while being able to meet EN954-1 Category 4. Easy to use software makes setup and configuration quick and simple.

  • EN954-1 category 4 compliant
  • Standard slaves and safety slaves can be used in the same network, and no new safety network is necessary
  • Response time 40 ms maximum (time interval after the safety input of safety slave has been shut down until the safety output is turned off)
  • A maximum of 31 safety slaves can be connected
  • Stop category 0 or 1 can be selected
  • Easily setup using Windows based configuration software

If you are looking for IDEC AS-Interface Safety Products, please call us on (844) 331-9377 or email us at info@clrwtr.com we will do our best to help you find the IDEC Communication Interface Terminals that you are looking for at the most competitive prices possible. If you are searching for IDEC AS-i Safety technical information (data-sheets) please use the datasheets or product selection guide page links.

IDEC SX5A AS-Interface Communication Terminals Repeaters Distributor
SX5A AS-i Communication Terminals & Repeaters

The SX5A Communication terminal allows you to easily connect a non AS-Interface product to an existing AS- Interface Safety at Work network. With 2 inputs available on each unit, you can connect 2 different products to each terminal.

  • Connect non AS-Interface safety products, such as door interlocks or light curtains, to an AS-Interface Safety at Work network
  • Power using standard AS-Interface power supply
  • Indicator LED help identify operation and input status
  • Two inputs are available per communication terminal
  • Wire using standard cable piercing method
IDEC XA XW Series Emergency Stop Switches Distributors
AS-i E-Stops

IDEC uses distinguished approach towards the design and manufacturing of its E-Stops which has made IDEC a leader in the E-Stop market. IDEC offers variety of E-Stops categorized by various sizes and features which are best suited for your unique project needs.

IDEC PS2R Series AS-i Power Supply Distributor
AS-i Power Supplies

Your AS-interface network can depend on the reliable IDEC IZUMI PS2R AS-interface power supply. Available in 73W and 145W in a slim and rugged housing, these power supplies provide unparalleled power source for your network.

Key Features

  • Slim housing style mountable on DIN rails
  • Two output ratings: 73W and 145W
  • IP20 finger-safe terminals
  • CE marked (LVD, EMCD)
  • UL listed (UL 508), CSA (C22.2 No. 950), TUV (EN60950, EN61010-1)
  • Noise standards EN55022, EN61000-6-2 compliant
  • IEC62026-2 compliant

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC AS-Interface safety products enabling us to further assist you in finding the correct IDEC AS-i network product for your application in the USA, Canada and Mexico. Whether we have SX5A series safety monitor in stock in Boise, Idaho or need to get them from IDEC IZUMI to any USA cities; Clearwater Tech can get SX5A series communication terminal to you fast and save money! It will be very helpful if you have IDEC AS-i safety product part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AS-i safety e-stops that you are looking for in seconds. If you do not have the part numbers for PS2R series AS-i power supply, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Emergency Stop
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

PS2R Series
SX5A Series
Safety Monitors
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY