July 15, 2009
ABB Breakers
Here is the new freedom up to 630 A. That's right, it's called
Tmax T4 & T5 - the new ABB
SACE moulded-case circuit-breakers with the performances you've always wanted. High breaking capacity at all
voltages, Ics at 100% of Icu, high specific let-through energy limitation for optimal installation sizing and high
discrimination values, and this means choosing always the apparatus of the right size.
|
Weidmuller Breakers
The CB9100 Series
of thermal magnetic circuit breakers provide a rugged and industry-standard form factor (18 mm/pole). This series is for
supplemental circuit protection. Weidmuller's DIN-rail mounted circuit breakers are available for use in applications where
circuit protection must be able to distinguish between circuit overloads and short circuits. Each circuit breaker has the ability
to be reset
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
NC1V Series |
DIN rail mount with finger safe spring up screw terminals and trip current ratings up to 30A. Available in
1, 2 or 3 poles. Optional direct panel mount kit and Relay Voltage trip units available.
- Slim, space-saving housing
- Rated short-circuit capacity: 2500A
- Trip current from 0.1A and up to 30A
- Optional auxiliary / alarm contacts or inertia delay
- 5 Tripping Delay Curves available
- Spring-up, finger-safe (IP20) terminals reduce wiring time
- Ring terminals can be installed. Captive terminal screws construction
- Auxiliary/alarm contact terminals equipped with terminal covers
- Retractable actuator provides flush / clean appearance and makes status easily visible
- Safe trip free mechanism ensures circuit to remain open until trip condition is cleared and operator manually
resets to off before switching to on
|
|
If you are looking for IDEC Circuit Breakers, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the IDEC NC1V Breakers that you are looking for at the most competitive prices possible.
If you are searching for IDEC IZUMI NRC Series Circuit Breaker technical information (data-sheets) please use the datasheets
or product selection guide page links.
|
NRC Series |
The NRC series of circuit breakers feature a built-in DIN rail mounting "foot" for the most convenient
mounting. Terminated with M4 screw terminals (30A, M5) at the base of the circuit breaker, these models fit
Right in with Relays, Timers and other
devices you may have mounted on your DIN rail. Various delay characteristics and current ratings satisfy applications from
logic level protection of PLCs, Sensors, or other
low current devices up to medium size motors, transformers & heaters.
- Mounting options include DIN rail, direct surface or panel cut-out
- Several delay curves to choose from
- Optional auxiliary contacts
- Choice of slide or lever actuators
- All models equipped with reset trip indicators
- Available rated currents from 300mA to 30A
- UL recognized, CSA certified
|
NRA Series |
The NRA series of circuit breakers offer the ultimate in flexibility. Different actuator styles allow
for differentiation of look and feel. Various delay characteristics and current ratings satisfy applications from logic
level protection of PLCs, sensors, or other low current devices up to medium size motors and heaters. Most units can be
through-panel mounted or plugged into DIN rail sockets. Standard termination is via .250" quick-connect terminals, sockets
use M3.5 screw terminals.
- Available in 3 different actuator styles
- Current ratings up to 30A at 250VAC or 65VDC
- 1, 2 or 3 pole models
- Optional DIN rail or surface mount sockets
- Variety of delay tripping curves
- Optional "inertia delay" to prevent nuisance tripping on motor or transformer loads
- Optional alarm contacts or auxiliary contacts
- Reliable to over 10,000 operations
- UL recognized, CSA certified, VDE
|
NRB Series |
The NRB series of circuit breakers feature stud termination for extra reliability in terminating wires.
Various delay characteristics and current ratings satisfy applications from logic level protection of PLCs, sensors, or
other low current devices up to medium size motors, transformers and heaters. Designed for through-panel mounting via
machine screws.
- Current ratings up to 50A at 250VAC or 65VDC
- 1, 2 or 3 pole models
- Variety of delay curves
- Optional "inertia delay" to prevent nuisance tripping on motor or transformer loads
- Optional alarm contacts or auxiliary contacts
- Reliable to over 10,000 operations
- UL recognized, CSA certified
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC IZUMI
products enabling us to further assist you in finding the correct NC1V series circuit protectors for your application in the
USA, Canada and Mexico. Whether we have NRC series breaker in stock in Boise, Idaho or need to ship direct from IDEC to any
USA cities; Clearwater Tech can get NRA series circuit protector to you fast and save you money! It will be very helpful if
you have the NRB series breaker part numbers ready, then our sales representatives can provide you with a pricing and
availability quote for IDEC circuit protectors that you are looking for in seconds. If you do not have the part numbers for
IZUMI circuit breakers, our application engineers will be able to help you figure out the part numbers and get the price
quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
