IDEC IZUMI

Home   >   Products   >   IDEC   >   Safety Relays & Controllers

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

• 1NO-1NC safety input type, such as Magnetic Coded Safety Switches
• Fault diagnosis function with dual safety circuits
• Internal relay operations can be monitored with LED Indicator
• Finger-safe protection
• 22.5 or 45mm wide, 35mm DIN rail mounting
• EN ISO 13849-1 PLe, Safety Cat 4 compliant, and EN 62061 SIL 3
• UL listed, CSA certified, TÜV NORD approved

If you are looking for IDEC Safety Controller, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the IDEC HR1S-DMB/DME Safety Relay that you are looking for at the most competitive prices possible. If you are searching for IDEC FS1A-C01S Safety Controller technical information (data-sheets) please use the datasheets or product selection guide page links.

• 1NC or 2NC safety input type, such as E-Stops or Interlock Switches
• EN ISO 13849-1 PLe, Safety Cat 3 compliant, and EN 62061 SIL 3
• Fault diagnosis function with dual safety circuits
• Internal relay operations can be monitored with LED Indicator
• Finger-safe protection
• 22.5mm wide, 35mm DIN rail mounting
• UL listed, CSA certified, TÜV NORD approved

• 2NC safety input type, such as E-Stops or Interlock Switches
• EN ISO 13849-1 PLe, Safety Cat 4 compliant, and EN 62061 SIL 3
• Welding detection of start switch
• Fault diagnosis function with dual safety circuits
• Internal relay operations can be monitored with LED Indicator
• Finger-safe protection
• 22.5mm wide, 35mm DIN rail mounting
• UL listed, CSA certified, TÜV NORD approved

• EN ISO 13849-1 Performance Level e, Safety Category 4 compliant, and EN 62061 Safety Integrity Level 3
• Integrated and removable teminal styles available
• Compact design: 45 mm in width
• Time delay outputs: 3NO
• Auxiliary outputs enable monitoring of power, safety inputs, and a time delay output
• Environmentally friendly, RoHs directive compliant
• UL Listed, CSA certified, TÜV NORD approved.

When you want a straightforward system that's safe, easy-to-use and won't cost an arm and a leg, a SafetyOne FS1A safety controller is the answer!

Unlike a multiple safety relay system, which requires cumbersome wiring and take up too much space, or safety PLCs that can be costly and difficult to program, our safety controllers make it easy to consolidate safety circuits. At the same time they meet safety requirements, save space with minimal wiring and cost customers less money. FS1A is UL listed, TUV rated and CE marked, as well as meets IEC 61508 integrity level 3, ISO 13849-1 performance level e and EN954-1 safety category 4.

SafetyOne can replace up to six safety relay modules with no programming. Easily configure by turning on a dip switch to 1 of 8 pre-difined logic circuits and one module can connect with various IDEC safety and non safety components such as Emergency Stop switches, Interlock Switches, pilot lights, sensors and light curtains. With 7 dual channel safety inputs, 4 safety outputs and multiple non safety inputs, monitor, blanking and solenoid drive outputs, SafetyOne can simplify your complete safety and logic circuit.

Key Features

• No programming required
• Replaces up to six safety relay modules
• Just select a logic from eight pre-programmed circuits
• One module can connect with various types of safety inputs such as E-stop switches or light curtains
• Easily monitor logic circuit, I/Os and error codes with I/O LEDs and two 7 Segment LED display
• IEC 61508 integrity level 3, ISO 13849-1 performance level e and EN954-1 safety category 4 compliant