IDEC Emergency Stop Switches E-Stop Switch XA HA Positive Action AB6-V Unibody XW HW Traditional TW XN TWTD Distributor
IDEC E-Stops Distributors
IDEC Emergency Stop Switches E-Stop Switch XA HA Positive Action AB6-V Unibody XW HW Traditional TW XN TWTD Distributor
IDEC Emergency Stop Switches E-Stop Switch XA HA Positive Action AB6-V Unibody XW HW Traditional TW XN TWTD Distributor

Red Lion Conditioner

Latched Alarms can be reset with a serial command or a user input. A standby feature suppresses the alarm during power-up until the temperature stabilizes outside the alarm region. Standby eliminates power-up tripping for low acting alarms. A user input can be used to set and reset non-latching alarms. The output relays can also be manually controlled with register commands. The module's high density packaging and DIN rail mounting

ABB Devices

If a Fault Occurs in a load circuit, the protection device EPD24 will detect this rapidly and reliably, disable the power output transistor and hence interrupt the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3 to 1.8 times the selected rated current. An activation of capacitive loads up to 20,000 µF is possible, deactivation only occurring in the case of overloads

IDEC IZUMI

Loading

Home   >   Products   >   IZUMI DENKI   >   E-Stops

IDEC IZUMI

(844) 331-9377       (888) 723-4773 (Fax)
info@clrwtr.com

IDEC IZUMI XA Series 16mm Emergency Stop Switches Distributors
XA Series

XA Series

The XA and XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world.

Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation or excessive force to the stop button in an emergency may break or dislodge a vital part, causing the spring loaded contact to stay closed. This situation renders the E-Stop incapable of stopping the machine and can lead to catastrophic events, personal injury and possible loss of life.

If you are looking for IDEC E-Stops, please call us on (844) 331-9377 or email us at info@clrwtr.com we will do our best to help you find the IDEC Emergency Stop Switches that you are looking for at the most competitive prices possible. If you are searching for IDEC E-Stop technical information (data-sheets) please use the datasheets or product selection guide page links.

IDEC IZUMI L6 Series Miniature Switches Pilot Devices Distributor
Pushbuttons & Pilot Lights

The L6 series of pushbuttons and pilot devices comprise a "full line" solution to 16mm panel cutouts. Locking lever removable contacts facilitate wiring harnesses or PCB applications to reduce wiring time.

  • 16mm (5/8") round panel cutout
  • Super bright LED or incandescent illumination
  • IP65 degree of protection (water tight)
  • Positive action, IEC compliant E-Stop
  • Oversize button heads available for 16mm round, square, mushroom, selector and key switches
  • Quick release contacts facilitate PCB design or wiring harnesses
  • Low level, snap action, DPDT contacts rated up to 5A
  • .110" solder tab/quick connect or PCB terminals
  • UL Recognized, CSA Certified, TUV Tested, CE Marked
IDEC X6 Series 16mm Emergency Stop Switches Distributors
X6 Series

X6 Series

Utilizing our unique Reverse Energy Structure, new X6 emergency stop switches are the latest in safety innovation wrapped in a sleek, miniature package.

This smooth design is ideal for applications requiring cleanliness, such as food processing machines, medical equipment and semiconductor equipment. Manufactured to prevent dust build up and make cleaning simple, this sleek switch is both hygienic and visually appealing.

IDEC XW Series 22mm Emergency Stop Buttons Distributors

XW Series

XW Series

The XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world.

Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation or excessive force to the stop button in an emergency may break or dislodge a vital part, causing the spring loaded contact to stay closed. This situation renders the E-Stop incapable of stopping the machine and can lead to catastrophic events, personal injury and possible loss of life.

IDEC 30mm XN Series E-Stop Switches Distributor
XN Series

IDEC now offers a new series of E-stops that provide an even higher level of function and safety to customers. These 30mm XN E-stops are the first and only with exciting, new technology to make machines even safer.

  • Available in plastic bezel, metallic padlock, flush bezel
  • Install up to 20 padlocks (XN4E)
  • 40mm and 60mm mushroom heads (XN1E)
  • Flush bezel only 21mm from front of panel
  • Only 47.7mm depth behind the panel for up to 4 contacts (XN1E)
  • Push ON LED allows E-Stops to be illuminated when latched
  • Unique "Safe Break Action"
  • Direct Opening Action (IEC60947-5-5, 5.2, IEC60947-5-1, Annex-K)
  • Safety Lock mechanism (IEC60947-5-5, 6.2)
  • Push-to-lock, pull/turn-toreset built into one switch
  • Gold-plated sliver contacts
  • XN4E complies with OSHA and ISO 12100-2:2003
  • RoHS compliant, lead free design, UL-listed, cUL, TUV, CE
IDEC HA1B HA1E Series E-Stop Switches Distributors
HA1B/HA1E Series

Miniature Switches and Pilot Devices: 5/8 (16mm) Key features of HA1B/HA1E Push Lock Turn Reset include:

  • PCB or Solder Terminals
  • Locking Lever Removable Contact Blocks
  • Positive Action Contacts
  • 1 or 2 form B (SPST-NC) Contacts
  • IP65 Protection
  • 16mm Mounting Hole
  • Tamper Proof Construction
IDEC A6 Series 16mm Miniature Switches Pilot Devices Distributor
AB6-V Series Unibody

The A6 series of pushbuttons and pilot devices offer a very competitive price and simple construction in a space saving package.

  • 16mm (5/8") round mounting hole
  • Super bright LED Illumination
  • Momentary, Maintained, Selector, Key, Pilot Light and Push-Lock/Turn-Reset Functions
  • Gold-clad silver snap acting contacts for reliable low level switching
  • IP40 (dustproof) or IP65 (oiltight) versions
  • Choice of round, square or rectangular bezel shapes
  • .110" solder/quick connect termination
  • UL Recognized, CSA Certified
IDEC HW Series Traditional Unibody E-Stops Distributors
HW Series Traditional & Unibody

Building on a long history of pushbutton dominance, IDEC offers its internationally rated 22mm pushbuttons and pilot devices, the HW series.

  • 22mm (7/8") panel cutout, Easy to assemble
  • Locking lever removable contacts
  • Finger safe (IP20) screw terminals standard, other terminal styles available
  • Tamperproof mounting and construction
  • All E-Stops meet EN418 (IEC compliant, positive action)
  • Slow make, double break, self cleaning 10A contacts
  • UL listed, CSA certified, TUV approved, and CE marked
  • Easy to assemble
  • Available assembled or as sub-components
  • Super bright incandescent or LED illumination
  • Black plastic or silver metal bezels
  • IP65 and NEMA type 1, 2, 3, 3R, 4, 4X, 5, 12, and 13
  • 600V/10A contacts with a wide operating range from 5mA at 3V AC/DC to 10A at 120V AC
IDEC FB Series Plastic Control Boxes Distributors

FB Series

IDEC now offers plastic enclosures for HW, TW and XW 22mm switches and pilot devices. These enclosures are available in three sizes and can be used to mount up to five 22mm switches. With an outer depth of only 59.5mm it's easy to mount them in confined spaces, while a polycarbonate cover and base with stainless steel screws makes them corrosion resistant and durable for a longer life. All enclosures are beige in color; however one-hole enclosures are also available in yellow making them perfect for installing with HW, TW and XW Emergency Stop switches. The bright color enhances visibility making them easy to locate in case of an emergency. All FB enclosures are also IP65 and NEMA Type 4X rated.

IDEC IZUMI TW Series Traditional E-Stop Switches Distributors
TW Series Traditional

A traditional NEMA style switch, the TW series features a chrome plated octagonal locking ring that fastens from the front of the panel. Modular construction with snap-on contacts allows for great flexibility in configuration.

  • 22mm (7/8") round mounting hole
  • Super bright incandescent or LED illumination
  • Corrosion resistant octagonal chrome plated locking bezel
  • Snap on 10A contacts
  • Modular contruction for maximum flexibility
  • NEMA 4X and IP65 watertight/oiltight panel sealing
  • Available assembled or as sub-components
  • Large M3.5 screw terminals with captive sems plate
  • UL Listed, CSA Certified, TUV Approved, and CE Marked
IDEC TWTD Series Full Size NEMA Pushbuttons Distributor
TWTD Series Traditional & HN Unibody

The rugged "full size" TWTD series IDEC pushbuttons offer both variety and durability in an attractive design.

  • 30mm (1 1/4") round panel cutout
  • Rugged design includes chrome plated steel locking ring and die-cast zinc threaded body
  • Super bright LED or incandescent illumination
  • Modular construction for maximum flexibility (up to 6 contacts per switch)
  • NEMA 4X and IP65 watertight/oiltight panel seal
  • Available assembled or as sub-components
  • UL Listed, CSA Certified, Demko Approved, and CE Marked

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC IZUMI products for your application in the USA, Canada and Mexico. Whether we have XA e-stops in stock in Boise, Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get HA positive action e-stops to you fast and save money! It will be very helpful if you have the IDEC emergency stop switch part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AB6-V unibody e-stops that you are looking for in seconds. If you do not have the part numbers for XW e-stops, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

22mm HW Traditional & Unibody E-Stops
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

22mm TW Traditional E-Stops
30mm XN E-Stops
30mm TWTD Traditional & HN Unibody E-Stops
Clearwater Tech   © 2009 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY