IDEC IZUMI

Home   >   Products   >   IDEC   >   Safety Switches

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

The HS1B is a Full Size Interlock Switch in a more rugged, industrial die-cast aluminum housing. Options include an LED indicator in red or green, and two different circuit configurations.

• 64x40x125 mm housing
• Direct opening action: If the door is forced open, the contacts are disconnected even if they are welded or stuck
• Available with or without an indicator (red or green)
• Available with 2 contact configurations (1NO/1NC or 2NC)
• Keys compliant with ISO14119 and EN1088
• IP67 degree of protection (watertight)

If you are looking for IDEC Door Interlock Switches, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the IDEC Non-Locking Safety Switches that you are looking for at the most competitive prices possible. If you are searching for IDEC Locking Safety Switch technical information (data-sheets) please use the Datasheets OR Product Selection Guide page links.

This full-size interlock switch has a lightweight plastic housing, three conduit ports and two key entry slots. The HS2B comes with an optional LED indicator, in red or green, and has the same direct opening action as all IDEC interlock switches.

• 57x40x98 mm housing
• Direct opening action: If the door is forced open, the contacts are disconnected even if they are welded or stuck
• Available with or without an indicator (red or green)
• 1NC/1NO contacts
• Keys compliant with ISO14119 and EN1088
• IP67 degree of protection (watertight)

HS5B interlock switches have a lightweight plastic housing, and while larger than the HS6B it is still a very small switch for tight fitting locations. It can be installed in several configurations, so the actuator can be accessed from five directions, and has three key types available.

• 30x30x91mm housing
• Available with 2 contact configurations (1NO/1NC or 2NC)
• Direct Opening Action: Opening the door forces the contacts to disconnect even if the contacts are welded (IEC/ENC60947-5-1)
• Keys compliant with ISO14119 and EN1088
• IP67 degree of protection (watertight)

The HS6B is the smallest three-contact enabling switch currently on the market, and will fit in even the tightest areas, so you have safety in every necessary location.

• 30x15x78mm housing
• Integral molded cable reduces wiring time
• IP67 (IEC60529) watertight sealing (contact is sealed; housing allows drainage)
• Direct Opening Action: Opening the door forces the contacts to disconnect even if the contacts are welded (IEC/ENC60947-5-1)
• Keys comply with ISO14119 and EN1088
• IP67 degree of protection (watertight)

The HS6E series safety interlock switch provides a cost effective solenoid door interlock in a compact housing. A total of 4 circuit configurations for both spring and solenoid lock types can be found with standard 3 meter cable.

• 15-mm-wide, thinnest solenoid type interlock switch in the world.
• Flexible installation- reversible mounting and angled cable allow four actuator insertion directions.
• Energy saving- 24V DC/110 mA
• Manual unlocking possible on three sides.
• LED indicator shows solenoid operation
• Standard 3m cable (1m and 5m cable available on request)
• Only proprietary actuators can be used, preventing unauthorized access (ISO14119, EN1088)
• 500N min actuator locking strength (GS-ET-19)
• NC contacts are direct opening (IEC/EN60947-5-1)
• IP67 (IEC60529)

The HS5E series safety interlock switch provides a cost effective solenoid door interlock in a compact housing. A total of 8 circuit configurations for both spring and solenoid lock types can be found with standard 3 meter cable.

• World's smallest 4 contact solenoid interlock switch. (35 x 40 x 146 mm)
• Flexible installation - the head can rotate, allowing 8 different actuator entries
• Metal actuator entry slot ensures long life
• Standard 3m cable (1m and 5m cable available on request)
• Only proprietary actuators can be used, preventing unauthorized access (ISO14119, EN1088)
• 1000N min actuator locking strength (GS-ET-19)
• LED pilot light indicates the solenoid status
• Gold-plated contacts
• NC contacts are direct opening (IEC/EN60947-5-1)
• IP67 (IEC60529)

The HS1E is a full size, lightweight plastic interlock switch that includes a locking solenoid unit for extra security. When mounting the key on a movable door, and the switch on a machine body, the door can be mechanically locked when closed.

• 104x40x129 mm lightweight plastic housing
• Solenoid locking (power to unlock) to prevent access to hazardous areas
• Manual unlock key type also available
• Direct opening action (on main circuit NC contacts)
• Available with or without a LED indicator (red or green)
• Choose from 4 circuit configurations
• Flexible installation: the key can be accessed from two directs
• Keys compliant with ISO14119 and EN1088
• IP67 degree of protection (watertight)

The HS1C is a full size interlock switch in a rugged die-cast aluminum housing that also includes a locking solenoid. When mounting the key on a movable door, and the switch on a machine body, the door can be mechanically locked when closed.

• 106x40x125 mm rugged die-cast aluminum housing
• Solenoid locking (power to unlock) to prevent access to hazardous areas
• Manual unlocking possible with special tool
• Available with a red or green LED indicator
• Choose from 4 circuit configurations
• Flexible installation: the key can be accessed from two directions
• Keys compliant with ISO14119 and EN1088
• IP67 degree of protection (watertight)