Clearwater Tech Logo
Home | Contact Us
(844) 331-9377

IDEC Corporation

Home   >   Products   >   LUMIFA   >   LED Light Strips


(844) 331-9377       (888) 723-4773 (Fax)

LF1B-N Series (IP65)

The LF1B-N series LED light strips are slim and perfect for applications where space is a concern. They come in six different lengths and six distinct colors, making them a very flexible lighting solution.

  • Compact design: 27.5mm wide, 16mm high, and 134 to 1,080mm long
  • Improved brightness
  • 6 Colors: cool white, warm white, yellow, red, blue, green
  • 2 Cover colors: clear, white
  • IP65 degree of protection (waterproof, dustproof), suitable for use in wet locations
IDEC LUMIFA LF1B-N Series LED Lighting Solutions Distributors
LF1B-N Series

If you are looking for IDEC LUMIFA LED Lighting, please call us on (844) 331-9377 or email us at we will do our best to help you find the IDEC IZUMI LF1B-N Light Strips that you are looking for at the most competitive prices possible. If you are searching for IDEC LF1B Light Strip technical information (data-sheets) please use the datasheets or product selection guide page links.

LF1B Series

LF1B miniature LED light strips are housed in a thin light strip, and are available in four sizes with a choice of two covers (transparent or white). Customers needing an LED that can provide protection from dust, as well as from limited water spray, have their answer. LF1B light strips are white and have a rated voltage of 24V DC.

  • Brightness: 62.5 Lumens/Watt
  • Low heat generation
  • Less energy usage, longer operation life, smaller mounting space, and no electrical noise.
  • 71% reduction of power and CO2 emission when compared to 20W fluorescent lamps (LF1B-C/D)
  • Thin and slim style fits into compact spaces.
  • Two cover colors: clear and white (diffused light)
  • Cool white, warm white, yellow and red illumination colors available.
  • UL Listed & IP54 protection against dust and water splash (IEC 60529)
IDEC LUMIFA LF1B Series LED Illumination Units Distributor

LF1B Series

LF1D Series

With new mini and long versions, LF1D light units can fit any application. The brightest in their class at up to 67.2 Lumens/Watt, the LF1D series provides even lighting able to illuminate not only the target object, but a wide peripheral area while keeping glare and heat generation to a minimum.

A new mini unit is compact at only 100 x 50 x 25mm (4 x 2 x 1-inch), making it great for smaller sized machines, where high light output is needed but space is at a premium. Mini versions use one large LED light engine, rather than several smaller LED dies, eliminating shadows and distributing even light over a wide area.

One of the longest industrial grade lamps in the industry, with 365mm or 510mm (14.4 or 20-inch) models to choose from, our LF1D long versions have an ideal shape, lower color temperature (4700K) and high power 2000/3000lm luminous flux making them perfect for replacing traditional fluorescent lamps. The flat light design reduces glare and multiple shadows, as well as improves visibility from a distance.

IDEC LF1D (IP67, IP67f, IP69K) & LF2D (IP67, IP67f) Series LED Machine Lighting Distributors
LF1D Series

LF2D Series

LF2D LED units are the brightest in their class. With their rugged construction they are ideal for machine tools, and food and beverage processing equipment. Offered in a wide or slim package, the design of these LED lights provides equally brilliant light at the center or edges of the units.

  • Brightness: Slim: 66.6 Lumens/Watt & Wide: 67.2 Lumens/Watt
  • Life: 70% of initial luminance at 50,000 Hrs
  • Rugged & durable for harsh environments
  • IP67 (Polycarbonate lens) or IP67f (Reinforced glass lens)
  • Available in clear or diffused lens
  • Stainless steel cover, diecast aluminum housing
  • Recessed mounting provides lower profile
  • UL Listed (wet locations) & RoHS Compliant
IDEC LUMIFA LF2D Series (IP67, IP67f) LED Lighting Distributor
LF2D Series

LF2B Series

Super-bright and energy efficient LF2B LED strips have a wide range of input voltages either 100 - 240V AC or DC-battery compatible 12/24V DC with a choice of clear or white covers. These slim units can be used in many applications and installations where space is limited. With an environmental rating of IP65 (protection from water and dust) the LF2B is can be used where water is being sprayed. Choice of two mounting brackets provide flexibility to locate these lights where needed. With a long lifespan, with approximately 54% less power consumption compared with fluorescent tube lighting, the LF2B series LED light strips are a bright choice now and in the future.

  • Slim units: 40mm (w) x 29mm (h). Using mounting brackets, one-step installation in a narrow space is possible.
  • Five Lengths (210/330/580/830/1,080mm) are offered to meet space requirements and illumination coverages.
  • Bright and clear white LED illuminates the shapes and colors of target objects. (LF2B illuminance is approximately 25% higher than the LF1B.)
  • Two covers: clear or white
  • IP65 degree of protection (waterproof, dustproof), suitable for use in wet locations
IDEC LUMIFA LF2B Series LED Machine Lighting Distributors

LF2B Series

LF1E Series

The LF1E illumination lights are designed to be used in freezers or refrigerated display cases where the ambient temperature is as low as -40°C. These energy saving units, with a long service life, compact size and low heat generation make them perfect for illuminating areas with very low temperatures.

  • Three types of light distribution: no-lens, condensing and dual
  • Life: 70% of initial luminance at 40,000 Hrs
  • Available in 4 lengths
  • Plastic lens suitable for food industry
  • IP54 protection against dust and water
  • CE marked, UL Listed (damp locations)
IDEC LUMIFA LF1E Series LED Illumination Lights Distributor

LF1E Series

LF1A Series

LF1A LED strips use super-bright multi-chip LEDs providing illumination equivalent of a 20W fluorescent lamp, while consuming only one third the power. They come in a thin housing, available in three sizes, with four color configurations (warm white, cool white, yellow and red). LF1A light strips have a rated voltage of 24V DC.

  • Brightness: 66.6 Lumens/Watt
  • Energy saving: One-third of fluorescent lamps
  • Long life: 40,000 Hrs (Half-life)
  • UL Listed
  • RoHS Compliant
IDEC LF1A (IP40) Series LED Light Strips Distributors
LF1A (IP40) Series

LF1A-D2F Series

Environmental-proof LED illumination units can be used in environments where water/oil spattering may occur. An internal waterproof gasket and transparent panel with thick reinforced glass make LF1A-D2F LED light strips perfect for use in a food processing line or outdoors where they might be immersed or sprayed with water or oil. These light strips are also RoHS compliant, mercury free. LF1A-D2F light strips have a rated voltage of 24V DC.

  • Energy saving: One-third the power of fluorescent lamps
  • Long life: Five times more than fluorescent lamps
  • IP67f protection: water, dust and oil resistant
  • Stainless steel front bezel
  • Reinforced glass front face
  • RoHS compliant, mercury-free
IDEC LUMIFA LF1A-D2F Series (IP67f) LED Light Strips Distributor
LF1A-D2F Series (IP67f)

LF1F Series

Unlike fluorescent lights, LED lights do not flicker and therefore illuminate objects evenly. Uneven surfaces, such as scratches and flaws, are more visible providing more accurate inspections. The LF1F provides steady light regardless of ambient temperature and the narrow profile saves space allowing mounting flexibility.

  • Energy saving
  • Long operating life
  • Maintenance free
  • 12mm-thin bezel saves space
  • 300mm square illuminated surface
  • Wider operating temperature range than fluorescent lighting
IDEC LF1F Series LED Machine Lighting Distributor

LF1F Series

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC products enabling us to further assist you in finding the correct IDEC LF1D series for your application in the USA, Canada and Mexico. Whether we have LUMIFA LF2D series in stock in Boise, Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get IDEC LF1E series to you fast! It will be very helpful if you have the LUMIFA LF1A series part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IDEC LF1A D2F series that you are looking for in seconds. If you do not have the part numbers for LUMIFA LF1F, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Datalogic Sensors

High Precision and reading repeatability are obtained thanks to the laser emission combined with high switching frequency. The SRF series presents versions with 30, 50, 80 and 120mm slots guaranting best adaptation to the many different applications. Sensitivity adjustment is easily accomplished thanks to the trimmer positioned on the back side of the sensor. The range offers versions with PNP or NPN output, Light/Dark mode selection.

TURCK Sensors

The New FM Approval Standard permits the use of quick disconnect with a lock fast accessory equipped sensor being used in a Class 1 Div 2, Groups A, B, C, D, as well as sensors with traditional conduit. The ability to use quick disconnect will enable customer to install sensors faster and at a lower installed cost than traditional conduit methods. TURCK also now offer approved cordsets with eurofast or minifast connectors.