Home > Products >
IDEC > MicroSmart Pentra > PLC
MicroSmart Pentra Series
MicroSmart Pentra has always meant speed, flexibility and power. The MicroSmart Pentra PLCs packs even more
features into a small footprint to create an even more powerful controller with a response time up to 16 times faster than leading
The new embedded Ethernet MicroSmart Pentra with web server functions boasts powerful features that no
competitor in the micro PLCs market can match. With an embedded 10/100Mbps RJ45 ethernet port and remote connectivity,
communication can be done at a faster speed. These controllers not only support Modbus TCP, but also have the capability to send
up to 255 email messages with dynamic data and have 1MB for a user web page. These PLCs can be configured to communicate with
WindLDR software, IE/Firefox/Safari web browsers, WindSRV OPC software, HG operator interface, and Modbus TCP, all at the same
time. Up to 14 simultaneous connections can be established!
MicroSmart Pentra Series
If you are looking for IDEC MicroSmart Pentra Series PLC, please call us on (844) 331-9377 or
email us at firstname.lastname@example.org we will do our best to help you find the
IDEC FC5A-C16R2 PLC that you are looking for at the most competitive prices possible. If you are searching for IDEC FC5A-C16R2C
PLC technical information (data-sheets) please use the datasheets or product selection guide page links.
- Embedded Ethernet CPU
- Modbus TCP, RTU and ASCII
- 1MB user web page
- Email/Text message alerts
- USB programming port
- Integrated 100 KHz high speed I/O
- Up to 7 Communication Ports
- Max. 512 I/Os
Every CPU module comes equipped with embedded I/O points, and you can conveniently add snap-on expansion
modules for up to 512 I/Os based on your system requirements. All MicroSmart controllers are DIN-rail and panel mountable.
All MicroSmart Pentra PLCs meet the highest standards for safety including: cULus listed for Class 1 Division
2 hazardous locations, CE compliant, as well as certified for marine use by ABS, DNV, and Lloyd's Registry.
MicroSmart Pentra PID Module
A dedicated PID Control module is available for extreme stability and complex applications. This
particular module has more functionality than any other controller on the market. Independent of CPU scan time, the PID
Control module does the work, reducing PLC scan time without taking up PLC memory space.
- Precise, stable and accurate PID control with less than a 0.2% error
- Available in two models:
- Built-in 2 analog inputs, 2 x 4-20mA/0-10VDC outputs
- Built-in 2 analog inputs, 2 x relay outputs
- Each input individually configured to accept different signal types
- Up to seven modules can be mounted on the MicroSmart Pentra
- Maximum 14 PID loops with auto-tuning
- 14-bit resolution
- ARW (anti-reset windup)
FC5A-D12 with MRAM Memory
All new batteryless models are designed with MRAM memory so your PLC can store values permanently. This makes
them ideal for applications that need to retain critical data permanently, beyond the 30 days and limited life expectancy of a
backup lithium battery.
- Permanent data backup with MRAM memory
- Embedded Ethernet port
- Support Modbus TCP, RTU and ASCII
- 1MB Interactive Web Pages
- Email & Text Messages with dyanmic data
- USB mini-B programming port
- Integrated 100 KHz high speed counters and outputs
- Up to 7 Communciation Ports
- Max. 492 I/Os
FC5A-D12 with MRAM Memory
FC5A-SIF4 RS485 Communication Module
FC5A-SIF4 cannot be connected to FC4A CPU modules. FC5A all-in-one 24-I/O CPU module cannot use the FC5A-SIF4
module in combination with the function modules listed in the table below. When using these modules in combination with the
FC5A-SIF4 module, use the slim type CPU module.
- Supports Modbus RTU/ASCII Master and Slave protocol
- Supports IDEC Datalink protocol
- Supports Maintenance and User protocols
- Supports up to 115Kbps baud rate for fast transmission speed
- Configure up to 5 modules (FC5A-SIF4) on one Slim CPU
- Configure up to 3 modules (FC5A-SIF4) on one All-in-One CPU
- FC5A CPU module with firmware version 220 or higher
- WindLDR ver. 6.20 or higher, available in Automation Organizer Software suite version 1.2
FC5A-SIF4 RS485 Communication Modules
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC programmable
logic controllers enabling us to further assist you in finding the correct FC5A-C16R2D PLC for your application in the
Pacific Northwest USA. We can proudly say that we carry more IDEC PLCs in stock than any other IDEC IZUMI distributors in the
Pacific Northwest region. Whether we have FC5A-C24R2 PLC in stock in Boise, Idaho or need to get them from IDEC Corporation;
Clearwater Tech can get FC5A-C24R2C PLC to you fast and save money! It will be very helpful if you have the IDEC FC5A-C24R2D part
numbers ready, then our sales representatives can provide you with a pricing and availability quote for FC5A-D12K1E Slim CPU that
you are looking for in seconds. If you do not have the part numbers for FC5A-D12S1E CPU, our application engineers will be able to
help you figure out the part numbers and get the price quote to you as soon as possible.
Can't find a part number?
Housed in a Slim, compact, easy-to-install DIN
rail mount enclosure, the VTD Series comes in a variety of nominal voltages. VTD series voltage
transducers are high-performance transducers for sensing voltage in DC powered installations.
Applicable for use on circuits to 600 VDC, VTD voltage transducers provide a fully isolated, 4-20 mA
output proportional to rated nominal voltage in DC circuits. VTD transducers feature
The OIS60 PLUS operator interface station has a 6"
touch-screen color display with six user-defined function keys and six user-defined LEDs. It offers two
RS232/422/485 serial port and two USB ports (one device and one host). The OIS60 PLUS accepts five of the
OIS PLUS clip-on I/O modules in any combination. The tag database is common for both the ladder logic and
the screen objects. The OIS55 PLUS operator interface station has