October 04, 2011
Red Lion Timers
The Large Display Timer & Cycle Counter
is a versatile display that functions as an Elapsed Timer or Preset Timer, with full-featured user programmability. The meter
includes a built-in Cycle Counter, relay output and serial communications capability. The 6 digit displays are available in either
2.25" or 4" high red LED digits with adjustable display intensity. The 2.25" high models are readable up to 130 feet.
|
SSAC Timers
The TRDU Series
is a versatile universal time delay relay with 21 selectable single and dual functions. The dual functions replace up to three
timers required to accomplish the same function. Both the function and the timing range are selectable with switches located on
the face of the unit. Two LED's indicate input voltage and output status. This device offers full 10 A isolated relay output
contacts in either SPDT or DPDT.
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
GT3A Series |
Flexible multi-mode/multi-range timers with 5A contacts in octal plug in format. Time range up to 180
hours. Both power on and momentary input trigger type SPDT and DPDT contact configuration.
- 4 selectable operation modes on each model
- External start, reset, and pause inputs
- Panel mount or socket mount
- Large variety of timing functions
- Power and output status indicating LEDs
|
|
If you are looking for IDEC Multifunction Timers, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the IDEC Analog Timer that you are looking for at the most competitive prices possible. If
you are searching for IDEC True OFF Delay Timers technical information (data-sheets) please use the datasheet or product selection guide
page links.
|
GT3F Series |
True power off delay timer with 5A contacts. Time range up to 10 minutes in SPDT and DPDT contact
configuration.
- "True" power OFF-delay up to 10 minutes
- No external control switch necessary
- Available with reset inputs
- Mountable in sockets or fl ush panel
|
GT3S Series |
Star Delta timer with 5A contacts. Operating input 120 to 2540VAC.
- The star delayed contact goes on when power is turned on and goes off after a set time for the star contact (T1).
The delta delayed contact goes on after star-delta switching time (T2) and goes off when power is turned off.
- The switches should be securely turned using a flat screwdriver, 4mm wide maximum.
- Since changing the setting during timer operation may cause malfunction, power should be turned off before changing the
setting.
|
GT3W Series |
Multifunction dual time range timer with 5A contact rating. Time ranges up to 300 hours.
- Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions
- 2 time settings in one timer
- 8 selectable operation modes on each model
- Mountable in sockets or fl ush panel
- Power and output status indicating LEDs
- Time ranges up to 300 hours
|
RTE Series |
The new RTE series timers offer the most popular timing functions in 2 models (Power and Signal Triggered)
together with high power 10A contacts.
- 20 time ranges and 10 timing functions
- Time delays up to 600 hours
- Space-saving package
- High repeat accuracy of ± 0.2%
- ON and timing OUT LED indicators
- Standard 8- or 11-pin and 11-blade termination
- 2 form C delayed output contacts
- 10A Contact Rating
|
Accessories |
GT3 Series Timer Accessories
- DIN Rail Mount Socket & Applicable Hold-Down Springs
- Panel Mount Socket & Applicable HD Springs
- Panel Mount Adapter
- Sockets for use with Panel Mount Adapter
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC IZUMI
products for your application in the USA, Canada and Mexico. Whether we have GT3S series (Star-Delta) timer in stock in Boise,
Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get GT3W series dual time range timer to you
fast and save money! It will be very helpful if you have the RTE series analog timer part numbers ready, then our sales
representatives can provide you with a pricing and availability quote for GT3A series analog timer that you are looking for in
seconds. If you do not have the part numbers for GT3F series true off delay timer, our application engineers will be able to help
you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
