IDEC IZUMI

Home   >   Products   >   IDEC

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

IDEC RJ relays, the newest addition to IZUMI relay family, were designed with the same attention-to-detail IDEC is known for. One feature that exemplifies this is an optional LED. It uses a unique light guide to give you a brighter and more noticeable status indicator from multiple directions.

• Compact size: 12.7 x 27.0 x 28.8mm
• Electrical life: 200,000 cycles (AC Load) and 100,000 cycles (DC Load)
• Mechanical life: 30 million cycles (AC coil) and 50 million cycles (DC coil)
• RoHS Complaint (2002/95/EC)

If you are looking for IDEC IZUMI Products, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the IDEC Relays that you are looking for at the lowest prices possible. If you are searching for IDEC PLC technical information (data-sheets) please use the IDEC Datasheets OR Product Selection Guide page links.

IDEC PS5R Slim Line models give you all the power of a traditional Power Supply in only half the space. The 30W and 60W are only 36mm wide, while the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power.

In addition to the new 120W and 240W, there are also 30W, 60W and 90W models available. The PS5R Slim Line series IDEC power supplies are all UL508 listed and approved for Class I Div 2 hazardous locations. The 30W and 60W models are NEC Class 2 rated. The 120W and 240W comply with SEMI F47 sag immunity requirements and bear the F47 Approval mark.

The Microsmart Pentra is IDEC newest and the industry's fastest Microprogrammable Logic Controller. Residing within the MicroSmart Pentra is a Logic Engine that provides speed, power, performance and precision for your control system.

• Support 32-bit data processing
• IEEE standard Floating Pt. Math
• Built-in Modbus Master & Slave
• Field Upgradeable Firmware
• Up to 512 I/Os, Configure up to 56 Analog I/Os
• Max. of 7 Communication Ports

The XA and XW series of IDEC Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed.

• Ensures all NC contacts open if the Contact Block is separated from the operator
• Pushlock turn reset and push-pull functions built into same unit, 40mm button size
• Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)
• Safety lock mechanism (IEC60947-5-5, 6.2)
• Degree of protection IP65 (IEC60529)
• Solder or PCB Terminal options
• UL recognized, c-UL approved, EN compliant

The L6 series of pushbuttons and pilot devices comprise a "full line" solution to 16mm panel cutouts. Locking lever removable contacts facilitate wiring harnesses or PCB applications to reduce wiring time.

• 16mm (5/8") round panel cutout
• Super bright LED or incandescent illumination
• IP65 degree of protection (water tight)
• Positive action, IEC compliant E-Stop
• Oversize button heads available for 16mm round, square, mushroom, selector and key switches
• Quick release contacts facilitate PCB design or wiring harnesses
• Low level, snap action, DPDT contacts rated up to 5A
• .110" solder tab/quick connect or PCB terminals
• UL Recognized, CSA Certified, TUV Tested, CE Marked

IDEC SA1E Photoelectric Sensors incorporated all of the following features in a compact housing, easy to install and competitive pricing.

• High reliability and precision
• High speed response & Subminiature design
• Five sensing methods: through-beam, polarized retroreflective, diffuse-reflective, small-beam reflective, and background suppression.
• Cable and M8 connector types available
• Degree of protection: IP67 (IEC60529)
• cULus, CE marked

The 5.7" HG2G Series are superior quality operator interfaces with advanced features and flexibility to your application, at a best value in the market today, guaranteed! They have super-bright LCD screen with sharp visibility, a built-in Ethernet port for remote communications with major brand PLCs, and a slim design providing space savings. IDEC IZUMI HG2G Series have been designed to meet the needs of our customers. IDEC offers improved technology and performance at an even better price!

Look around you. IDEC SmartRelays are everywhere! You can find them in lighting controls, ice-making machines, grocery store mist systems and more. And there's a good reason: IDEC Smart Relays meet all safety requirements, while at the same time saving you time and money. Now IDEC IZUMI's new fourth-generation SmartRelays include new advanced feaures that offer even more versatility and functions!

IDEC RTE series Timers offer the most popular timing functions in 2 models (Power and Signal Triggered) together with high power 10A contacts. In fact, they use IDEC's famous RH2 Relay, so you can be sure of the reliability. Powered Triggered Models offer standard ON Delay, Interval and Cycle ON & OFF timing functions, while Signal Triggered Models offer 6 distinct timing functions. Both are tubular pin base or .187" quick connect terminals. All models mount into industry standard sockets or standard 45mm square panel cutouts using an optional adaptor.

IDEC's SignaLight light towers offer a cost-competive solution to your light tower demands. Available from 1 to 5 tiers with either LED or incandescent lamps, they feature easy-to-replace lamps and a unique, built-in, rubber vibration-damper. Models are available with a steady (non-flashing) function or with a built-in flashing circuit that allows any combination of flashing and non-flashing tiers.

Ideal for such applications as automated assembly and packaging machines, conveyor systems, and CNC machinery. SignaLights provide a clear and obvious indicator of machine status from anywhere on a factory or office floor.

IDEC YC series contactors feature weld-resistant silver alloy contacts, giving them a higher level of reliability and an extra long life. Contacts are also Cadmium-free for environmental safety. YC Overloads feature bimetallic thermal overload relays directly mounted to the contactor. Plus a full range of accessories are available for this series including top and side mounting auxiliary contact blocks, coil surge suppressors, Timers and more. A mechanical interlock accessory can be used when using two contactors to reverse a motor, to prevent both sets of contacts closing at the same time.

As IDEC continues to move towards a green future, we are excited to announce the "LUMIFA" series of LED light strips, LF1A and LF1B. Utilizing LF1A and LF1B LED light strips give your customers a way to save time, energy and money! These environmentally-friendly light units have a higher initial cost, but recoup the amount with savings over time. Perfect for narrow areas, those not easily accessible or that can be dangerous to access, these LEDs have a lifespan of 40,000 hours (half illumination). So once it's installed, customers won't have to worry about maintenance issues! Plus these LED light strips provide a bright light source while producing very little heat (less than a fluorescent lamp).

IDEC IZUMI circuit protectors offer circuit protection, which is far superior to fuses in applications containing relay circuits, motors, heaters, transformers, solenoids and semiconductors. IDEC offer four different circuit breaker choices; NC1V, NRA, NRB, & NRC series.

• Idec Safety Interlock Switch
• Idec Terminal Blocks
• FA3S Mid-Size Modular Idec PLC

IDEC Corporation designs and manufactures control automation products that are sold to original equipment manufacturers (OEM). IDEC's goal is to meet the customers' ever changing needs with quality products at a competitive price. With products that direct processes and systems, IDEC components are used in a variety of applications. You may see IDEC IZUMI switches in an elevator, a subway station or on a factory control panel. IDEC relays, power supplies or timers may be in a UPS (Uninterrupted Power Supply) Unit or a water dispensing machine. IDEC PLCs might be controlling robots in a manufacturing process or factory automation setting. In addition, IDEC products can be found at car washes, in vending machines, animal feedlots, escalators, and water treatment plants.

Part of a global network, IDEC's parent company is known worldwide for its quality and reliability in the pushbutton industry. IDEC IZUMI has been in business for over half a century. With a strong presence in Asia, North America, Central and South America, Australia and Europe, IDEC products can be found all over the world. IDEC's manufacturing plants are located throughout Japan, Taiwan and Singapore. In a dynamically changing technological age, it is critical that IDEC products meet not only the standards of the local areas where they are sold, but many global product standards as well. Many of IDEC customers produce products that are sold worldwide. Idec continue to produce products that meet their increasing demands.

IDEC Corporation USA was established in the United States in 1975 and provides quality products, excellent customer service and a reliable name that customers can trust. IDEC has subsidiaries in Canada and Australia with a strong sales network that also covers Latin America. IDEC has a responsibility to our customers to develop the products that will continue to fit their changing needs. Idec research and development teams work hard at providing products that satisfy our customers' needs now and in the future. IDEC want to create the safest, most efficient, most productive contact between man and machine not only in industrial fields, but also in everyday life.

Interaction between people and machines is becoming more and more common and IDEC Corporation will be there developing and manufacturing products that help customers improve their working environments. No matter how far mechanical performance may evolve, no matter how advanced the technology, you can count on IDEC providing not only the best products, but also the customer service, technical assistance and delivery you can count on.

Our IDEC distributors warehouse in Boise, Idaho stocks some IDEC products (Relays Sockets Power Supplies PLC Programmable Logic Controllers Emergency Stop Switches Pushbuttons Pilot Lights Touch Screens Sensors Displays SmartRelays Timers Display Lights Contactors Thermal Overload Relays Starters LED Light Strips Circuit Breakers Distributors) enabling us to further assist you in finding the correct IDEC IZUMI Products for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Misouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have IDEC products in stock in Boise, Idaho or need to ship direct from IDEC Corporation to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Fransisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portand Oklahoma City Tucson New Orleans Las Vegas Cleaveland Long Beach Alburquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Whichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmand Yonkers Spokane Augusta Rhichmand Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.clrwtr.com can get IDEC products to you fast!

IDEC Corporation designs and manufactures control automation products that are sold to original equipment manufacturers. IDEC IZUMI's goal is to meet our customers' ever changing needs with quality products at a competitive price. With products that direct processes and systems, IDEC components are used in a variety of applications. It will be very helpful if you have the IDEC E-Stops part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IDEC IZUMI Pushbuttons & Pilot Lights that you are looking for in seconds. If you do not have the part numbers for IDEC Touchscreens, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.