Clearwater Tech Logo
Home | Contact Us
(844) 331-9377

IDEC Corporation

Home   >   Products   >   IDEC   >   Relays & Sockets


(844) 331-9377       (888) 723-4773 (Fax)

General Purpose Series

IDEC 6mm interface relays provide a compact solution for general purpose relay requirements.

RJ relays were designed with the same attention-to-detail IDEC is known for.

The RJ22 model has a maximum contact rating of 1amp at 250V AC, while maintaining a minimum switching load of 100uA 1V DC, allowing customers to use this relay for their dry circuit switching needs.

The adaptable RU series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models.

RR series relays provide reliable switching for industrial loads.

Featuring the same contact ratings as the larger RR series, the RH series uses silver cadmium oxide contacts to help reduce voltage arcing.

The RY/RM series of relays satisfy applications for lower level switching needs such as pilot lights or logic level devices.

IDEC RJ Series Power Relays Distributors

General Purpose Series

If you are looking for IDEC Relays, please call us on (844) 331-9377 or email us at we will do our best to help you find the IDEC Permanent Magnet Relays that you are looking for at the most competitive prices possible. If you are searching for IDEC IZUMI Magnetic Latching Relay technical information (data-sheets) please use the datasheets or product selection guide page links.

Force Guided Series

RF1V Series force guided relay have mechanically linked contacts allowing you to use in safety related circuits. Available in four or six pole models, all relays have 6A form-A contacts. RF1V can be mounted directly on printed circuit board or can use DIN RAIL or PCB mount socket. RF1V is UL recognized, TUV rated and CE marked.

Key Features:

  • Force guided contact mechanism (EN50205)
  • 4Pole (2A2B, 3A1B) or 6 pole (4A2B, 5A1B, 3A3B) models 6A Contacts
  • Built-in LED indicator available
  • Finger-safe DIN rail and PC board mount sockets
IDEC RF1V Force Guided Relays SF1V Relay Sockets Distributor

Force Guided Series

PCB Series

RJ PCB relays, the newest addition to our relay family, were designed with the same attention-to-detail IDEC is known for. The most recent IDEC innovation is a return spring structure for the RJ PCB relays that eliminates unnecessary weak points improving durability, and increasing electrical conductivity and service life.

IDEC's RQ relays are low-profile, PCB relays that provide quality within a compact package. RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a 16A model is also available.

IDEC RQ Series PCB Relays Distributor
PCB Series

Solid State Series

The "hockey puck" style RSS series of solid state relays allow switching of the most demanding loads. Highly resistant to inrushes, with a built-in snubber, the RSS series is ideal for switching loads such as lights and heaters. Available with either DC (4-32V) or AC (90-280V) inputs with output current ratings up to 90A. All models feature zero-voltage turn-on to reduce inrush current and a dual SCR switch (rather than a triac) for enhanced reliability and superior heat dissipation properties.

RSC relays have technology to dissipate the heat away from main switching components, making them a great buy. Other relays may require you to add your own heat sink or deal with a burned out product, but the new RSC relays from IDEC have a built-in heat sink making them easy to install and get running. The heat sink, along with an epoxy-free design, eliminates the need to de-rate your relay and also increases its life expectancy. And an LED status indicator makes sure you can see it working.

IDEC RSS Series DIN Panel Mount Solid State Relays Distributors
Solid State

Latching Series

These magnetic latching relays have excellent self-holding performance and operate by pulse input so they maintain conditions even during power failures. They are available in AC and DC coil voltages up to 10A. DIN rail and panel mount sockets are available for a wide range of mounting applications.

A miniature latching relay with a 14-pin ice cube base and DPDT contact configuration. Pulse input operation maintains conditions even during power failures. DIN rail, PCB, and panel mount sockets are available for a wide range of mounting applications.

IDEC RR2KP Series Magnetic Latching Relays Distributors
Latching Series

DIN Rail Snap/Surface-Mount Sockets

IDEC pioneered the popular and much copied DIN rail, snap-mount sockets.

  • Worldwide Approvals: UL, CSA, TUV, CE
  • UL94-V0 flame resistant material
  • Models available in fingersafe versions (with IEC standard terminal numbering)
  • Unbreakable nylon construction
  • Rust-proof, double nickel-plated steel screws are available in applicable models (withstands 96 hour salt spray test)
  • Hold-down springs and clips available for most models
  • Receptacles with four contact points per blade
  • Spring Clamp sockets available
IDEC DIN Rail Surface Mount Relay Timer Sockets Distributor
DIN Rail Snap/Surface-Mount

Through Panel Mount Sockets

IDEC panel mounting sockets allow for easy relay or timer replacement from outside the panel without exposing personnel to live wiring. Ideal for such applications as test fixtures where relays of different voltages may need to be swapped on a regular basis.

  • Through-panel mounting
  • Hold down springs available for all models
  • Industry standard pin arrangements
  • Snap-in and screw-down models
IDEC Panel Mount SR SH SY Series Sockets Distributors
Panel Mount SR, SH & SY Series

PCB Mount Sockets

An alternative to soldering relays directly to a PC board, PCB sockets allow for easy replacement of relays or timers. Available in several industry standard pin arrangements (.110" and .187" blades). Hold down springs are available for all models, to ensure the relays stay in their place.

  • Industry standard pin/receptacle arrangements
IDEC SH SY Series PC Board Mount Sockets Distributor
SH & SY Series PCB Mount

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC IZUMI products enabling us to further assist you in finding the correct RU series relay for your application in the USA, Canada and Mexico. Whether we have RH series relay in stock in Boise, Idaho or need to get them from IDEC IZUMI to any USA cities; Clearwater Tech can get RR series relay to you fast and save money! It will be very helpful if you have the RY-RM series relay part numbers ready, then our sales representatives can provide you with a pricing and availability quote for RJ PCB series relay that you are looking for in seconds. If you do not have the part numbers for RQ series relay, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Releco Relays

Although Specially Designed for railway applications these relays are also suitable for other industrial applications where increased product safety is required. Solutions for the transport market need to guarantee safety, security and comfort. The applications are expected to last a long time under challenging conditions. Be it for high-speed trains, metros, subways or other rail vehicles - in tunnels, on bridges, in train stations, airports,

ABB Relays

The CM-KRN Contact Protection relay is from the CM contact protection relay range. This protection relay operates with a rated control supply voltage of 24 V AC/DC, has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A and works according to the open-circuit principle. It acts as two-position switch and protects and reduces load from sensitive control contacts. It can be used with or without latching function.