IDEC Corporation

Home   >   Products   >   IZUMI   >   Sensors

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

IDEC SA1U sensors utilize a spring up screw terminal making wiring easy. Customers can use almost any conductors and no special cables (M8 or M12) are required.

• Universal voltage (Support 12-240VDC and 24-240VAC)
• Long sensing distance (up to 50m for through-beam)
• Spring up screw terminal for easy wiring
• IP67 waterproof protection
• Time delay functions (One shot, ON, OFF delay)
• 3 amp Relay Contacts (NO/NC)
• Competitive pricing

If you are looking for IDEC Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the IDEC IZUMI Proximity Switches that you are looking for at the most competitive prices possible. If you are searching for IDEC Photo Electric Sensor technical information (data-sheets) please use the IDEC Sensor Datasheets or Product Selection Guide page links.

(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

The DataSensor SL5 series, thanks to the laser emission concentrated in a thin light beam, represent the ideal solution for the detection of very small objects or to reach very long operating distances. Precise detections with decimillimetre resolutions can be obtained with the proximity model at an operating distance ranging from 0 to 35 cm. High operating distances can be reached with the 12 m polarised retroreflex model, or with the 60 m through beam model; high-resolution detections at shorter distances can be effected also. The visible red emission is generated by a Class 1 laser according to the EN 60825-1, guaranteeing the maximum safety in all applications.

IDEC SA1E photoelectric sensors incorporated all of the following features in a compact housing, easy to install and competitive pricing.

• High reliability and precision
• High speed response & Subminiature design
• Five sensing methods: through-beam, polarized retroreflective, diffuse-reflective, small-beam reflective, and background suppression.
• Cable and M8 connector types available
• Degree of protection: IP67 (IEC60529)
• cULus, CE marked

The SA1J series of sensors are a proven leader among inexpensive color recognition sensors. With a high response speed of 0.3msec and superb color discriminating electronics, the SA1J full color sensor is the perfect solution for almost any color detection application.

• One and three color models
• Highly sensitive to variations in color; can distinguish between subtle shades of the same color
• Fast response time of 0.3msec
• Three LEDs (Red, Green and Blue) provide a long sensing life
• Set sensor with the touch of a button
• IP 67 rating for harsh, wet environments
• SA1J: Easy alignment and targeting using a visible beam
• SA1J-F: Wide variety of fiber optic heads

• High-speed, miniature photoelectric sensor with analog (4-20 mA) and digital output
• Sense gradual color changes
• Available in both red and green LEDs
• Through-beam and reflected-light sensing available
• Ideal for Color Mark Or Simple Presence & Absence Applications
• Compact size allows for DIN rail mounting
• Dozens of coordinating fiber optic units available to address specific application needs
• Simple to install and program
• IP66 protection rating

• Detect slight differences in levels to verify quantity of thin, stacked sheets, such as paper or plastic
• Calculate thickness to maintain quality on high-speed webs
• Detect displacement within 0.0004" (10 microns); holds tight tolerances during precision placement using robotics
• Use small beam for precise detection of tiny, intricate parts
• Use high-powered beam to detect material which ordinarily absorbs laser light, such as black rubber
• Operate safely with delayed laser, remote interlock, power key switch, and laser LED on sensor head

The MX1C is a self contained laser displacement sensor. Featuring a small size and high resolution of 50 microns (0.002"), the MX1C is perfect for small mounting areas with delicate applications.

• Detect displacement within 50 microns (0.002"); holds tight tolerances to detect tiny components
• Align visible beam easily when sensing intricate parts in congested installation or dim lighting
• Check infinitesimal displacements to maintain quality control of vacuum-sealed products
• Install miniature, self-contained sensor where clearances are minimal
• Shape, size, color, and material do not detract from accurate measurement

SA1D sensor provides versatile, accurate distance sensing for your specific application needs. Both in analog and digital output style for comparison.

• Triangulation ensures high
• Wide sensing range: 7.87" to 19.69" (200 to 500 mm)
• Select analog output (20 to 4 mA) for continuous values, or digital or both
• Far and near limits can be defined for detecting objects within a specified zone
• A ten-dot LED level meter provides a dynamic display of detected positions and also shows near and far settings
• Alarm output indicates when sensing conditions may result in inaccurate results

SA6A Ultrasonic Analog sensor uses fuzzy logic to prevent inaccuracies due to temperature fluctuations. Rugged, compact design features microprocessor with diverse functions.

• Wide sensing range of 200 to 1000 mm
• Noise protection is available in two modes of operation
• Hold mode is ideal for sensing liquid levels without the chatter often caused by surface ripples
• Fuzzy logic eliminates the adverse effects of temperature fluctuation and air turbulence
• Shape, size, color and material do not impair high-precision measurement
• Select analog output (4-20 mA) for continuous values, or digital output, or both

• Ideal for installations with broad or narrow clearances
• Available with through-beam between the projector and receiver, which features a sensing range of 6' to 6-3/4" (2m)
• Sensing by diffuse-reflected light available, with a sensitivity adjustment for eliminating the interference of background light
• Through-beam and diffuse-reflected light sensors are featured in all configurations
• Adverse results and circuit damage are avoided through protection from reverse polarity
• High-speed, 1ms response time
• Automatic reset with power-up
• Protection rated IP66

• Available in free-voltage type, all available with time delay
• Featuring through-beam sensing between the projector and receiver, with sensing range of 32' to 9-3/4" (10m)
• Diffuse-reflected light sensing, as well as retro-reflected
• Available with three time delay modes (one-shot, on-delay, or off-delay) selectable from 0.1 to 5 seconds
• DC sensors have dual NPN/PNP transistor outputs
• Diffuse-reflected light sensors feature a sensitivity adjustment control
• All units are selectable: light on or dark on
• Unique touchdown terminals reduce wiring time
• Protection rated IP66

• Innovative non-contact water detection sensor
• Accurate sensing through transparent materials
• Long sensing range; 31.5in (800mm)
• High speed response time: 0.5msec
• Selectable through beam or diffuse reflective fiber cable
• Visible red LED ensures application set up

The DPRI magnetic proximity switch incorporates a sealed reed switch and four magnets inside a compact housing. This self-contained proximity switch requires no external power supply and can detect the presence of magnetic objects without contact.

• Lightweight, compact design reduces mounting space requirements
• Compact size allows units to be mounted in close proximity to each other
• Sealed reed contact can be used in dusty locations
• Long life and high reliability