Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9377

IDEC Corporation

Home   >   Products   >   IDEC   >   Switches & Pilot Devices

IDEC IZUMI

(844) 331-9377       (888) 723-4773 (Fax)
info@clrwtr.com

EU2B Series

Complying with UL and ATEX Directives for hazardous environments, new 30mm EU2B Hazardous Location Switches provide increased safety for your applications. With a Class 1, Zone 1 rating, the EU2B family offers more versatility than Class 1 Division 2 products. Featuring UL Type 4X Pushbuttons with multiple color options and operator choices.

30mm EU2B safety devices are fully sealed to prevent the release of enough electrical energy to ignite explosive gases or vapors into the environment, providing increased safety for applications in hazardous environments or those with potentially explosive atmospheres. With ATEX, c-UL (Canada), and UL/NEC 505; Type 4X, Ex de IIC T6 Gb, and Class 1 Zone 1 and Division 2 approvals, EU2B pushbuttons, pilot lights, selector switches, key selector switches, emergency stop switches and analog meters conform to the highest safety standards.

IDEC EU2B Series 30mm Hazardous Location Switches Distributors

If you are looking for IDEC Switches, please call us on (844) 331-9377 or email us at info@clrwtr.com we will do our best to help you find the IDEC Pushbuttons that you are looking for at the most competitive prices possible. If you are searching for IDEC Pilot Lights technical information (data-sheets) please use the datasheets or product selection guide page links.

8mm Switches & Pilot Devices

The A8 series of switches and pilot devices offer the extreme in space savings. With only an 8mm panel cutout, they are ideal for high density or very small control panels such as handheld devices. Low level snap acting contacts are ideal for PLC inputs, timer triggers, sensor triggers, or any other type of logic level switching. LED lamps are replaceable unlike most other switches and pilot lights of similar size.

The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 5V DC, 12V AC/DC or 24V AC/DC; there are also optional snap-on transformers and a DC-DC converter to support higher voltages.

IDEC A8 Series Miniature Switches Pilot Devices Distributor
8mm Switches & Pilot Devices

The XA and XW series of IDEC Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed.

  • Ensures all NC contacts open if the contact block is separated from the operator
  • Pushlock turn reset and push-pull functions built into same unit, 40mm button size
  • Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)
  • Safety lock mechanism (IEC60947-5-5, 6.2)
  • Degree of protection IP65 (IEC60529)
  • Solder or PCB terminal options
  • UL recognized, c-UL approved, EN compliant
IDEC IZUMI XA Series 16mm Emergency Stop Switches Distributors
Emergency Stops

16mm Switches & Pilot Devices

The A6 series of pushbuttons and pilot devices offer a very competitive price and simple construction in a space saving package. Features include snap action, double throw contacts, with gold plating for reliable low level switching. Ideal for such applications as PLC inputs, logic level switching, or anywhere space is at a premium.

The L6 series of pushbuttons and pilot devices comprise a "full line" solution to 16mm panel cutouts. Available with termination as 0.110" solder-tab / quick-connect or with PCB terminals. Locking lever removable contacts facilitate wiring harnesses or PCB applications to reduce wiring time.

With a choice of metallic or black plastic bezels, and flush or standard mounting, our newest 16mm switches add style and safety to any application. All LB switches are UL recognized, TUV approved, CSA certified and CE marked, as well as provide an IP65 degree of protection.

IDEC LB Series 16mm Miniature Switches & Pilot Devices Distributors
16mm Switches & Pilot Devices

22mm Switches & Pilot Devices

Flush mount CW switches are the best looking, industrial-strength 22mm switches in the market. Now, with the addition of options including new maintained pushbutton switch operators, rubber boots and nameplates, CW switches are better than ever.

Combining the 22mm size of a typical industrial pushbutton with low-level double throw contacts usually found on miniature 16mm switches, the LW Series offers a unique solution to your control applications.

Building on a long history of pushbutton dominance, IDEC offers its internationally rated 22mm pushbuttons and pilot devices, the HW series.

A traditional NEMA style switch, the TW series features a chrome plated octagonal locking ring that fastens from the front of the panel. Modular construction with snap-on contacts allows for great flexibility in configuration.

IDEC CW Series 22mm Flush Mount Switches & Pilot Devices Distributors
22mm Switches & Pilot Devices

30mm Switches & Pilot Devices

The CS series of cam switches offer the ultimate in selector switch flexibility. Available up to 12 positions, with up to 20 contacts they can meet almost any selection need.

The ARN series of mono-lever switches are an ideal solution for such applications as table or tool X-Y positioning. These switches mount into a standard 30mm round panel cutout and offer up to four directions of control.

The rugged "full size" TWTD series pushbuttons offer both variety and durability in an attractive design. With NEMA style mounting, which features a chrome plated locking ring that screws onto a die cast zinc body, stripped threads are now a thing of the past.

IDEC CS Series Oiltight Heavy Duty Cam Switches Distributor
30mm Switches & Pilot Devices

Flush Mount Switches & Pilot Devices

LW Silhouette switches make a personal statement about style with sharp lines and stunning colors. Projecting only 2mm when mounted on a panel, these switches provide a sleek, updated look while maintaining the highest levels of reliability. LW Silhouette switches are perfect for industries requiring a hygienic surface. A smooth design cuts down on surface area preventing dust and other particles from accumulating on the machine.

Flush mount CW switches are the best looking, industrial-strength 22mm switches in the market. Now, with the addition of options including new maintained pushbutton switch operators, rubber boots and nameplates, CW switches are better than ever.

IDEC LW Silhouette Series Oiltight Switches & Pilot Devices Distributors
Flush Mount Switches & Pilot Devices

FB Series

IDEC now offers plastic enclosures for HW, TW and XW 22mm switches and pilot devices. These enclosures are available in three sizes and can be used to mount up to five 22mm switches. With an outer depth of only 59.5mm it's easy to mount them in confined spaces, while a polycarbonate cover and base with stainless steel screws makes them corrosion resistant and durable for a longer life. All enclosures are beige in color; however one-hole enclosures are also available in yellow making them perfect for installing with HW, TW and XW Emergency Stop switches. The bright color enhances visibility making them easy to locate in case of an emergency. All FB enclosures are also IP65 and NEMA Type 4X rated.

IDEC FB Series Plastic Control Boxes Distributors

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some IDEC IZUMI products for your application in the USA, Canada and Mexico. Whether we have IDEC switches in stock in Boise, Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get IDEC push buttons to you fast and save money! It will be very helpful if you have the IDEC pushbuttons part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IDEC cam switches that you are looking for in seconds. If you do not have the part numbers for IDEC pilot lights, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

ABB Beacons

The Signal Tower & Beacon modular 70 mm system offers a wide range of optical and audible elements in all common voltages. A bayonet mechanism allows the components to be mechanically and electrically connected within seconds. Up to 5 signalling elements can be combined per station and the protection degree is IP54. The vandal proof design of Signal Beacons withstands all mechanical and

Weidmuller Converters

The Isolating Converters are based on the proven, robust technology of transferring analogue signals to the DCS system. Various signal sources and field devices can be connected to the input side of the isolating converters. As a result of this, the ACT20C can be configured for the user-defined processing of current, voltage and transmitter signals. Access is accomplished via a service interface on the front panel or