Clearwater Tech Logo
Home | Contact Us
(844) 331-9377

IDEC Corporation

Home   >   Products   >   IDEC   >   XA Series   >   E-Stop Switches


(844) 331-9377       (888) 723-4773 (Fax)

XA Series

The XA and XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world.

Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation or excessive force to the stop button in an emergency may break or dislodge a vital part, causing the spring loaded contact to stay closed. This situation renders the E-Stop incapable of stopping the machine and can lead to catastrophic events, personal injury and possible loss of life.

IDEC IZUMI XA Series 16mm Emergency Stop Switches Distributors

XA Series

If you are looking for IDEC XA Series Emergency Stop Switches, please call us on (844) 331-9377 or email us at we will do our best to help you find the IDEC IZUMI XA series switches that you are looking for at the most competitive prices possible. If you are searching for IDEC XA series E-Stops technical information (data-sheets) please use the datasheets or product selection guide page links.

This one-of-a-kind "safe break action" design, found only in the IDEC XA and XW series, reverses the energy direction and uses the spring-pressure to assure that the NC contacts will open if the emergency switch is damaged or the contact blocks separate due to excessive force. The NC contacts will reliably open, even if they are welded, and stop the machine.

Key Features:

  • IDEC's innovative "safe break action" ensures all NC contacts open if the contact block is separated from the operator
  • Pushlock turn reset and push-pull functions built into same unit
  • Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)
  • Degree of protection IP65 (IEC60529)
  • Solder or PCB terminal options
  • UL recognized, c-UL approved, EN compliant

Both the XA and XW series switches offer up to four "safe-break" contacts with a depth behind the panel that is half the size of conventional E-Stop switches. This means that there is an additional contact available and the switches can be used in Level 4 safety category applications.

These new E-Stop switches (XA and XW) are secured from the rear of the control panel so that the E-Stop cannot be removed from the front. Another unique feature of the XA and XW E-Stop switches is that either a push-turn or push-pull reset method can be used to reset the switches. This eliminates any possible confusion for operators when resetting the switch. The durability and quality of these new E-Stop switches make them extremely reliable. They can withstand the highest stress caused by panic or a reaction to an emergency situation.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some IDEC products enabling us to further assist you in finding the correct IDEC XA series pushbuttons for your application in the USA, Canada and Mexico.

Whether we have XA series E-Stops in stock in Boise, Idaho or need to ship direct from IDEC IZUMI to any USA cities; Clearwater Tech can get XA series push buttons to you fast!

It will be very helpful if you have the XA series pilot device part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IDEC XA series emergency stop switch that you are looking for in seconds.

If you do not have the part numbers for XA series emergency stop buttons, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Weidmuller Relays

The New SAFESERIES safety relay is certified by TuV Nord in accordance with EN 61508 for the safety integrity level SIL3. This relay is equipped with a wide range voltage input on the monitoring circuit from 24 V AC/DC to 230 V AC/DC. This allows it to be used individually for applications such as back-up systems or in overflow tank safety systems. The safety relay also features special circuitry in the input circuit. This makes the module immune

Sentrol Contacts

GE Security's 2100 series contacts extend monitored security protection to items such as snowmobiles, lawn and garden equipment, boats, trailers, bicycles, and motorcycles. Magnapull pull-apart cords can also be used to secure fence gates, overhead doors, and construction equipment. Magnapull magnetic pull-apart cords by Sentrol are used to protect valuable free standing items that are stored outdoors. The high-impact plastic housing protects