Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors
Kuebler By TURCK Absolute Encoders Distributor
Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors
Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors
October 19, 2009

Accu-Coder Encoder

The Model 925 Single Turn Absolute Accu-Coder USA is ideal for a wide variety of industrial applications that require an encoder with the capability of absolute positioning output. Its fully digital output and innovative use of Opto-ASIC technology make the Model 925 Absolute Shaft Encoder an excellent choice for all applications.
Absolute Encoders

Red Lion Converters

Redlion USA Model IFMA accepts a frequency input, and outputs an analog voltage or current in proportion to the input frequency, with 0.1% accuracy. The full scale input frequency can be set to any value from 1 Hz to 25 KHz, either with a frequency source, or digitally with the on-board rotary switch and push-button.
Red Lion Signal Isolators

TURCK Kubler

Home   >   Products   >   TURCK   >   Kuebler   >   Absolute Encoders

Kubler

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Kubler Absolute Singleturn Encoder Type 2450 Shaft / 2470 Hollow Shaft Distributors
Kubler Type 2450/2470 Single-Turn Encoders

Kubler Absolute Singleturn Encoder Type 2450 (Shaft) / 2470 (Hollow Shaft)

  • Ensures long service life and reliability of the application, no wear. Non-contact measuring system
  • Can be used for a wide temperature range without additional expense. Wide temperature range
  • Robust cable outlet. High strain-relief thanks to multiple clamping
  • Can be used where space is tight. Overall diameter of only 24 mm. Shaft diameter min. 4 mm

If you are looking for Kubler Absolute Encoders, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kubler Singleturn Absolute Shaft Encoders that you are looking for at competitive prices. If you are searching for Kubler Multiturn Absolute Stainless Steel Encoder technical information (data-sheets) please use the Kubler Absolute Encoder Datasheets OR Product Selection Guide page links.

Kubler Sendix Absolute Singleturn Type F3653 (Shaft) / F3673 (Blind / Hollow Shaft) SSI/BiSS Distributors
Kubler Sendix F36 Series Singleturn Encoders

Kuebler Sendix Absolute Singleturn Type F3653 (Shaft) / F3673 (Blind / Hollow Shaft) SSI/BiSS

  • TURCK introduces an optical encoder series designed completely without gears to eliminate wear and sensitivity to magnetic fields. The Kubler by TURCK F36 encoder series' compact size of only 36 mm with a hollow shaft diameter of up to 10 mm makes them well-suited for drive engineering and medical applications.
  • F36 singleturn encoders have a resolution of up to 17 bits; multiturn encoders have a resolution of up to 41 bits with over 16 million revolutions. An IP 67 protection rating and a temperature range of -40 to 90°C makes the encoders able to withstand harsh environmental conditions.
Kubler Sendix Absolute Singleturn Encoders Type 3650 (Shaft) / 3670 (Hollow Shaft) SSI Distributors
Kubler Type 3650/3670 Single-Turn Encoders

Kubler Sendix Absolute Singleturn Encoders Type 3650 (Shaft) /3670 (Hollow Shaft) SSI

  • Ensures long service life and reliability of the application, no wear. Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field. Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)
Kubler Sendix Absolute Singleturn Encoders Type 3651 (Shaft) /3671 (Hollow Shaft) Analogue Distributors
Kubler Type 3651/3671 Single-Turn Encoders

Kubler Sendix Absolute Singleturn Encoder Type 3651 (Shaft) / 3671 (Hollow shaft), Analogue

  • Ensures long service life and reliability of the application, no wear Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)
  • Can be used in outdoor applications with large fluctuations in temperature. Resistant against humidity and condensation.
Kubler Sendix Absolute Singleturn Encoders Type 3658 (Shaft) /3678 (Hollow Shaft) Distributors
Kubler Type 3658/3678 Single-Turn Encoders

Kuebler Sendix Absolute Singleturn Encoder Type 3658 (Shaft) / 3678 (Hollow Shaft)

  • Ensures long service life and reliability of the application, no wear Non-contact measuring system
  • Stays sealed even when subjected to harsh everyday use. Offers security against failures in the field Solid die-cast housing with up to IP 69K protection
  • Can be used for a wide temperature range without additional expense. Wide temperature range (-40 °C to +85 °C)
  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. High shock resistance (> 500g) and vibration resistance (>30g)
  • Can be used in outdoor applications with large fluctuations in temperature. Resistant against humidity and condensation.
Kubler Universal Type 5850 (Shaft) / 5870 (Hollow Shaft) Analogue Parallel Encoders Distributors
Kubler Type 5850/5870 Single-Turn Encoders

Kubler Universal Type 5850 (Shaft) / 5870 (Hollow Shaft) Analogue Parallel Encoders

  • Highest shock resistance on the market (=2500 m/s2, 6 ms acc. to DIN IEC 68-2-27)
  • Parallel interface
  • Divisions: up to 16384 (14 bits), singleturn
  • Housing ø 58 mm
  • Shaft version: IP 65 Hollow shaft version: IP 66
  • Various options (e.g. LATCH, SET)
  • Gray, Binary or BCD code
  • Short-circuit proof outputs
Kubler Standard Type 5852 (Shaft) / 5872 (Hollow Shaft) Encoders Distributors
Kubler Type 5852/5872 Single-Turn Encoders

Kubler Standard Type 5852 (Shaft) / 5872 (Hollow Shaft) Encoders

  • Parallel interface
  • Improved EMC characteristics
  • Divisions: up to 2000 Gray-Excess or up to 16384 (14 bits) Gray, singleturn
  • ø 58 mm shaft version
  • Shaft version: IP 65 & Hollow shaft version: IP 66
  • Count direction reversible
  • Temperature and ageing compensation
  • Short-circuit proof outputs
Kubler Type 5853/5873 Singleturn Absolute Shaft Encoders Distributor
Kubler Type 5853/5873 Single-Turn Encoders

Kubler Absolute Shaft Encoders Sendix absolut, Singleturn Type 5853 (Shaft) / 5873 (Hollow shaft), SSI/BiSS

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed even when subjected to harsh everyday use. Thus suitable also for outside use. Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range (-40°C to +90°C)
  • Easy diagnostic in case of trouble Status indication by means of LED, sensor, voltage and temperature monitoring
Kubler Stainless steel (Niro) Type 5876 Encoders Distributors
Kubler Type 5876 Single-Turn Encoders

Kuebler Stainless steel (Niro) Type 5876 Encoders

  • Integrative Technology Patented new type of construction integrates all components; use of an opto-asic and 6-layer multilayer technology now on just a single PCB
  • resolution up to 14 bits. Improved EMC-characteristics and highest shock resistance on the market (>2500 m/s2, 6 ms acc. to DIN IEC 68-2-27).
  • SSI or parallel interface
Kubler Sendix Absolute Singleturn Type 5858 (Shaft) / 5878 (Hollow Shaft) Profibus-DP Distributors
Kubler Type 5858/5878 Singleturn Encoders

Kubler Sendix Absolute Singleturn Type 5858 (shaft) / 5878 (Hollow shaft) CANopen

  • Increased resistance against vibrations and installation mistakes. Avoids machine stops and repair work
  • Few components and connection points increase the operational reliability
  • Remains tight, even in roughest environments, ensures highest safety against field breakdowns
  • Can be used in a wide temperature range without additional charge
  • Up-to-the minute field bus performance in the application
  • Fast data availability while reducing the load on the bus and the control
Kubler Type 7031 With ATEX Approval Encoders Distributors
Kubler Type 7031 ATEX Approval Single-Turn Encoders

Kubler Type 7031 With ATEX Approval Encoders

  • Version "flameproof-enclosure": approval zones 1, 2 and 21, 22
  • Zones 1, 2 and 21, 22: Ex II 2G EEx d II C T6 and Ex II 2D IP6x T85°C
  • High resolution: max. 5000 ppr.
  • Choice of construction: Through hollow shaft or solid shaft up to max. ø 12 mm.
  • Can be used even where space is tight: installation depth only 94 mm, minimal clearance required - thanks to through hollow shaft
Kubler Multiturn Type 5860 DeviceNet Absolute Encoders Distributors
Kubler Type 5860 Multi-Turn Encoders

Kuebler Multiturn Type 5860 DeviceNet Absolute Encoders

  • Minimal installation depth
  • High shock and vibration values
  • Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage
  • Certificated connection technology
  • Plug & Play cable assemblies
  • Long service life thanks to high shock and vibration resistance
  • Diagnostics and alarm functions
Kubler Multiturn Type 5862 (Shaft) / 5882 (Hollow Shaft) SSI or RS 485 Programmable Distributors
Kubler Type 5862/5882 Multi-Turn Encoders

Kubler Multiturn Type 5862 (Shaft) / 5882 (Hollow Shaft) SSI or RS 485 Programmable Encoder

  • Electronic multiturn gear with intelligent sensing technology (IST)
  • Integrative Technology
  • Max. 4 programmable outputs* for the SSI version
  • Programmable parameters include*: code type, resolution per revolution, total resolution, direction of rotation (cw or ccw), zero point
  • Resolution: up to 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Protection IP 65
  • Short-circuit proof at 5 V DC
  • With optional incremental track 2048 ppr.
  • Hollow shaft version: Only 40.5 mm clearance needed, thus lower profile than incremental encoders
Kubler Sendix Absolute Multiturn Type 5863 (Shaft) / 5883 (Hollow Shaft) SSI/BiSS Distributors
Kubler Type 5863/5883 Multi-Turn Encoders

Kubler Sendix Absolute Multiturn Type 5863 (Shaft) / 5883 (Hollow Shaft) SSI/BiSS Encoders

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed, even in the roughest environments, ensures highest safety against field breakdowns Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range
  • Easy diagnosis in case of fault condition Status indication by means of LED, sensor, voltage and temperature monitoring.
Kubler Sendix Absolute Multiturn Type 5868 (Shaft) / 5888 (Hollow Shaft) Profibus-DP Distributors
Kubler Type 5868/5888 Multi-Turn Encoders

Kubler Sendix Absolute Multiturn Type 5868 (Shaft) / 5888 (Hollow Shaft) CANopen/CANlift Encoder

  • Increased ability to withstand vibration and installation errors. Eliminates machine downtime and repairs. Sturdy "Safety-Lock Design" bearing structure
  • Fewer components and connection points increase the operational reliability Kübler OptoASIC technology with highest integration density (Chip-on-Board)
  • Remains sealed, even in the roughest environments, ensures highest safety against field breakdowns Resistant die cast housing and protection up to IP 67
  • Can be used in a wide temperature range without additional expense Wide temperature range
Kubler Multiturn Type 9080 CANopen/DeviceNet Encoders Distributors
Kubler Type 9080 Multi-Turn Encoders

Kuebler Multiturn Type 9080 Profibus-DP Encoders

  • Field bus interface: PROFIBUS-DP
  • Hollow shaft up to Ø 28 or shaft Ø 12 mm
  • Shock resistant up to 250 g
  • Only 60 mm clearance needed
  • Patented integrative technology
  • Very easy mounting of the hollow shaft version. The encoder is mounted directly on the drive shaft without coupling. This saves up to 30 % cost and 50 % clearance compared to shaft versions.
  • Divisions: up to 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Non-contact multiturn gear with new Intelligent-Sensing-Technology (IST)
  • Simple connection via connecting system (patent pending) - with removable socket box
  • Integrated T-coupler
  • Protection: IP 65
Kubler Multiturn Type 9081 SSI or RS 485 Programmable Encoders Distributors
Kubler Type 9081 Multi-Turn Encoders

Kubler Multiturn Type 9081 SSI or RS 485 Programmable Encoders

  • Hollow shaft up to ø 28 mm or shaft ø12 mm
  • Only 50 mm clearance needed
  • Programming parameters include*: code type, resolution per revolution, total resolution, direction of rotation (cw or ccw), zero point.
  • Very easy mounting of the hollow shaft version. The encoder is mounted directly on the drive shaft without couplings. This saves up to 30 % cost and 50 % clearance compared to shaft versions.
  • Max. 4 programmable outputs* for the SSI version
  • Divisions: 8192 (13 bits) per revolution, 4096 (12 bits) revolutions
  • Electronic multiturn gear with patented intelligent sensing technology (IST)
  • optional with incremental track 2048 ppr.

Our Kulber Encoder distributors warehouse in Boise, Idaho stocks some Kubler by TURCK Products (Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors) enabling us to further assist you in finding the correct Kubler Absolute Encoders for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have Kubler Absolute Encoders in stock in Boise, Idaho or need to get them from Kubler/TURCK; Clearwater Tech can get Kubler Absolute Encoders to you fast and save money!

It will be very helpful if you have the Kubler Absolute Encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler Absolute Shaft Encoders that you are looking for in seconds. If you do not have the part numbers for Kubler Absolute Hollow Shaft Encoders, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Clearwater Tech Site Usage Policy
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors
Kubler Absolute Encoders Hollow Shaft Profibus CANopen Multiturn Singleturn Stainless Steel Absolute Encoder Distributors
TURCK By Kubler Absolute Encoder Distributor
Clearwater Tech   © 2009 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX