December 14, 2009
Red Lion Displays
The 6-Digit Programmable Models
have two signal inputs and a choice of eight different count modes. These include bi-directional, quadrature and anticoincidence
counting, as well as a dual counter mode. When programmed as a dual counter, each counter has separate scaling and decimal point
selection. Rate indication is available on the programmable models only. The rate indicator has separate scaling and decimal point
selection,
|
Weidmuller Displays
The PMX400 Series
offers high-quality 4-character LED displays in 1/8 DIN format with additional functions. The displays can record temperature
values from PT100 3-wire and thermal elements. Optional analogue signals as well as two or four relay contacts for limit-value
monitoring are available on the output side. An integrated power supply can be used for supplying external sensors and input
devices.
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
Displays |
Kubler Process Displays
- Codix 529 - Compact, 5 digit display for analogue inputs with MIN/MAX value detection.
- Codix 530 - Compact, 5 digit display for analogue inputs with totaliser function!
- Codix 550 - Process control devices with programmable characteristic curve with 24 control points.
Relay outputs.
- Codix 552 - Like Codix 550, but with additional totaliser function!
|
|
If you are looking for Kubler Counters, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Kubler Pulse Counter that you are looking for at competitive prices. If you are searching
for Fritz Kuebler Timers technical information (data-sheets) please use the datasheets or product selection guide page links.
|
Controllers |
Kubler Process Controllers
- Codix 553 - Process control device with programmable characteristic curve with 24 control points.
- Codix 555 - Like Codix 553, but with additional totaliser function!
- Series 573 - 2 separate fast inputs, which can be calculated with respect to each other.
- Codix 850 - Multifunctional, i.e. all usual measuring signals can be connected directly (voltage, current,
thermocouples, resistance thermometers, resistance).
- Codix 851 - Like Codix 850, but with additional LCD display and keys for on-site operation.
|
Setpoint Adjusters |
Kubler Codix 533 LED Setpoint Adjusters
- Function of a digital time controller with analogue output.
- Manual functions with direct input or stepped incremental output of the setpoint.
- 4-digit 8 mm high top-quality LED display
- Physical variables output in the form of 0 to 12 V or 0 to 24 mA analogue signals.
- Units of display can be freely programmed and displayed - no conversion of the specified output value required.
- High accuracy of < 0.1% of the final value.
- Simpler to run processes than with a PLC or process controller.
- Everything can be programmed easily by means of 2 keys and the text menu.
- Digital setting - no additional DIP switches or potentiometers.
- Display allows simple monitoring of the specified setpoint output.
- User-friendly display form as direct digital value
- 3 functions integrated as standard in the Codix 533, manual and time-based
|
Temperature Displays |
Kubler Codix 531 LED Temperature Displays
- Temperature display in °C or °F
- MIN/MAX value acquisition and data backup in case of Power Off
- Galvanic isolation with protection against incorrect polarity
- Screw terminal connection: pitch 5 mm
- Display Hold input
- Compact and low-price temperature display
- Easy programming and operation
- Modern industrial design
- 5 measurements/second
|
Temperature Controllers |
Kubler Codix 554 LED Temperature Controllers
- Programmable input characteristic curve with up to 24 control points for 0 to 400/4000 O, 0 to 100 mV and
-100 to +100 mV
- MIN/MAX value acquisition and data backup in case of Power Off
- Auxiliary power supply output for measuring transducer/sensor
- SET key for limit values reset
- Display Hold input or limit values reset input
- Easy operation and programming thanks to large keys
- Inputs: thermocouples, millivolt, resistance thermometers with 2, 3 or 4-wire measurement
- Outputs 2 limit values with programmable hysteresis and programmable signal behaviour, relays with changeover
contact or optocoupler
- Key-lock input
- Optional serial interface
|
Codix 566 |
Codix 566 Controller Strain-Gauge Inputs
The Codix 566 Process Controller with Totaliser function displays measured values from all common
strain-gauge inputs in high resolution. In addition it can monitor and control 2 limit values.
These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment
LED display, easy-to-understand running Help Texts and a practical Quick-start Guide eliminate the need to wade through
time-consuming full instruction manuals.
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kubler Products
enabling us to further assist you in finding the correct strain-gauge controller for your application in the USA, Canada and
Mexico. Whether we have setpoint generator in stock in Boise, Idaho or need to get them from Kubler; Clearwater Tech can get
process display to you fast and save money! It will be very helpful if you have the temperature display part numbers ready, then
our sales representatives can provide you with a pricing and availability quote for process controller that you are looking
for in seconds. If you do not have the part numbers for strain-gauge controller, our application engineers will be able to help
you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
