Incremental
Loading
Absolute
Draw Wire

Accu-Coder Encoders

The Dynapar Rotopulser Model 60 can be directly replaced by Accu-Coder DR553 encoders. These encoders are used on Ink Jet printers, cut to length applications, motor drive speed feedback, and a variety of other applications. If you have tried to order Dynapar Rotopulser 60 you may have encountered long lead times. The DR553 from Encoder Products Company is the perfect substitution for Dynapar Rotopulser 60, and can be delivered today!

Weidmuller Power Supplies

The Pulsating DC Voltage is then fed from the rectifier and filtered to a low residual ripple by means of an electrolytic capacitor. This DC voltage is then fed to the output terminal. These are designed as pluggable screw terminals. A varistor is integrated in the output circuitry to attenuate voltage peaks. The operating status is indicated by means of a green LED via the output circuit. Devices with 600 W and higher

Kubler

Home   >   Products   >   Kuebler   >   Encoders

Kubler

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Kubler Type 5000 Incremental Shaft Encoders Distributors

Incremental

Incremental

Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series, detect positions bidirectionally as well as the rotation sense of the shaft.

  • Compact Ø 37 mm Design
    • 6 mm without flange - Solid shaft
    • 8 mm stator coupling - Hollow shaft
  • Standard Ø 58 mm
    • Solid shaft - 6 mm/10 mm clamping flange or 6 mm/10 mm synchro flange
    • Hollow shaft - 10 mm/15 mm torque stop
  • Large hollow shaft Ø 100 mm - 25 mm/30 mm spring element long

If you are looking for Kubler Encoders, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kubler Incremental Encoder that you are looking for at competitive prices. If you are searching for Fritz Kubler Absolute Encoders technical information (data-sheets) please use the datasheets or product selection guide page links.

Kubler Type 5853 Absolute Shaft Encoders Distributor

Absolute/Fieldbus

Absolute

Absolute singleturn encoders detect any angle within a full revolution of 360°. Absolute multiturn encoders detect any angle within a full revolution of 360° and also the number of revolutions. With absolute encoders, each incremental angle is assigned a code pattern. This allows the position to be detected at any time, even after a power failure, without having to initialize a reference run. Absolute encoders detect angles, positions and inclinations precisely - tasks, that are typically found in robotics, positioning and process technology.

  • Compact Ø 36 mm Design
    • 6 mm/8 mm synchro flange - Solid shaft
    • 6 mm/10 mm stator coupling - Hollow shaft
  • Standard Ø 58 mm
    • Solid shaft - 6 mm/10 mm clamping flange or 6 mm/10 mm synchro flange
    • Hollow shaft - 12 mm stator coupling
Kubler IS40 2-Dimensional Analogue MEMS/Capacitive Inclinometer Distributor
Angular Sensors

Inclinometers

Kubler inclinometers are naturally suited to use in harsh industrial environments, whether in railway technology, solar installations, commercial vehicles or cranes and hoists. They boast a compact, rugged construction, excellent shock resistance and a high protection rating.

The 1 and 2-dimensional biaxial inclinometers are suitable for measuring inclinations within the ranges ±10°, ±45°, ±60° and 0-360°. The zero point and measurement range end values are factory calibrated at 25°C to guarantee high accuracy.

Kubler Linear Magnetic Measurement System Limes LI50/B2 Distributors
Linear Sensors

With the LIMES LI20 and LI50 Kubler is presenting a new generation of measuring heads in a particularly solid die-cast housing. Used in conjunction with its magnetic bands with their stainless-steel covering, the resulting linear measurement system stays sealed even in harsh industrial environments and offers security against failures in the field. The magnetic rings offer the user a remarkably compact measurement system for rotary applications where installation space is very tight. Installation depths of only 16mm are possible with a large hollow shaft of 30mm. The combination of rings and bands plus Kubler's flexible manufacturing facilities open up a wide spectrum of different geometries that can be scanned, such as for example pitch circles or curves.

Kubler Draw Wire Encoders Type B80 Distributor
Draw-Wire Sensors

Draw-Wire

Encoders with a prefixed draw-wire sensor (0.25 to 40 m long) are the best choice for direct length measurements. Thanks to the excellent repeatability rating of 0.05 mm, they solve position control tasks with the utmost precision in applications which, up to now, could only be handled by complex equipment. Whether used for positioning of pumps in tanks, for alignment of elevating platforms or orientation of cranes: Just select a draw-wire sensor of the right size and with the appropriate output configuration for your system.

  • Analog current output, 4-20 mA, 2-wire, UB = 12-30 VDC, M12-male
  • Potentiometer output, 1 kΩ, UB = max. 30 VDC, M12 male
Kubler Length Measuring Kits Distributors
Measuring Kits

Measuring Wheels

If simple length measurements are required, such as cutting paper or fabrics to length, encoders with a prefixed measuring wheel are the inexpensive but very precisely operating alternative.

  • Measuring kit for length measurement of a measuring object that is moving in textile wood, paper, metal or plastics industries.
  • The complete measuring system is available as kit or as individual components.
  • The holding device is a movable support for encoders, to the shaft of which, for instance, a measuring wheel or pinion can be attached.
  • When used in conjunction with a pulse generating unit, the rack and pinion combination serves as a simple length and displacement measuring system..
Kubler Connectors Cables For Incremental Absolute Encoders Distributor
Accessories

Accessories for Kuebler Encoders

  • Connectors & cables
  • Optical Fiber Modules
  • Measuring Wheels
  • Couplings
  • Bearing Blocks
  • Mounting Attachments
  • SSI & Multifunction Displays
  • Isolating Inserts

Founded by Fritz Kubler in 1960 with the introduction of the patented KM1 timer meter, Fritz Kubler has expanded to become a global technology leader in the field of encoders. Located in the Black Forest of southern Germany, Kubler is family owned and managed with great pride in over 50 countries with a rapidly increasing staff dedicated to meet customer requirements quickly and reliably. Kubler Encoders, a complete line of incremental and absolute encoders with unique advantages, including temperature and aging compensation, plus improved EMI, vibration and shock resistance.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some TURCK products enabling us to further assist you in finding the correct Kuebler encoder for your application in the USA, Canada and Mexico. Whether we have Kubler by TURCK encoder in stock in Boise, Idaho or need to get them from Kuebler/TURCK Germany; Clearwater Tech can get Kubler encoder to you fast and save money! It will be very helpful if you have the TURCK encoders part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler incremental encoders that you are looking for in seconds. If you do not have the part numbers for Kubler absolute encoders, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Fieldbus
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Connectors
Cables
Slip Rings
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY