Clearwater Tech Logo
Home | Contact Us
(800) 894-0412


Home   >   Products   >   Limes   >   Linear   >   Measuring Systems


(800) 894-0412       (888) 723-4773 (Fax)

Limes LI20 / B1

The non-contact incremental magnetic linear measurement system LI20 / B1 - made up of the sensor head LI20 and of the magnetic band B1 - reaches a resolution up to 10 µm with a maximum distance of 1 mm between the sensor and the band.

  • Sturdy housing with IP67 protection. Option: special housing for maximum resistance against condensation (IP68 / IP69k, resistance to cyclic humidity acc. to EN 60068-3-38 as well as damp heat acc. to EN 60068-3-78)
  • Non-contact measuring system - free from wear
  • Masking tape protecting the magnetic band
  • Simple glued assembly of the magnetic band
  • Large mounting tolerances
  • Requires very little installation space
  • Warning signals via LED if the magnetic field is too weak
Kuebler Limes LI20/B1 Incremental Measurement System Sensor Head, Magnetic Band Resolution min. 10 µm Distributors
Type LI20 / B1

If you are looking for Kubler Linear Encoders, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the Kubler Linear Measuring Systems that you are looking for at competitive prices. If you are searching for Kubler Li20 Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

Limes LI50 / B2

The non-contact incremental magnetic linear measurement system LI50 / B2 - made up of the sensor head LI50 and of the magnetic band B2 - reaches a resolution up to 5 µm with a maximum distance of 2 mm between the sensor and the band.

A new version is available for outdoor use with extremely sturdy aluminium housing and stainless-steel cover, wide temperature range as well as a UV-resistant cable. IP68 / IP69k protection, special encapsulation technology and tested resistance to cyclic humidity and damp heat offer the highest levels of reliability, even in exposed outdoor use.

The bearing-free encoder system with the Limes reading head and magnetic rings, as well as the linear measuring system with Limes reading head and magnetic bands, are non-contact systems, which have been specially developed for exacting environmental conditions and for installation conditions where space is tight.

Kubler Limes LI50/B2 Incremental Measurement System Sensor Head, Magnetic Band Resolution min. 5 µm Distributor
Type LI50 / B2

Limes LA10 / BA1

The series LA10 is an absolute length measuring system. Sensor and translator and interpolation unit are together in one housing. The magnetic tape of series BA1 is paste up to a plain area. The LA10 can be mounted with a max. distance of 0.2 mm to the magnetic tape. Different interfaces are available (SSI, CANopen (DS406)).

Typical applications are handling systems, conveyor and storage technology, hydraulic presses, stamping machines, casting machines, linear slides, linear drives and pick and place systems.

Kubler Limes LA10/BA1 Absolute Magnetic Length Measurement System with 1 µm Resolution Distributors
Type LA10 / BA1

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some Kubler by TURCK products enabling us to further assist you in finding the correct Kubler Magnetic Band (B1) for your application in the USA, Canada and Mexico. Whether we have Kubler Li50 Sensors in stock in Boise, Idaho or need to get them from Kubler/TURCK; Clearwater Tech can get Kubler LA10/BA1 Linear Encoders to you fast and save money! It will be very helpful if you have the Kubler Linear Measuring Encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler Magnetic Band (B2) that you are looking for in seconds. If you do not have the part numbers for Kubler Linear Sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Accu-Coder Coupling

Our Technical Bulletin No. 525 provides a more detailed description and a few tips regarding installation and removal of the magnetic coupling. The concept is simple. One end of The Magnetic Coupling is a 5/8" or 3/8" diameter shaft that fits into the thru-bore encoder. The opposite end is a flat magnetic surface that attaches and holds to the end of the machine shaft to which you want to apply the encoder. The magnetized face of the magnetic

GE Door Contacts

The Contacts can be either recessed or surface mounted in window frame channels, and are difficult to detect in recessed door applications. The 1058 series of magnetic contacts is designed for tight-fitting installations. The 1/4-inch diameter makes the contacts perfect for applications such as casements or awning-style windows and security screens. Each contact includes a hermetically sealed reed switch that is potted in the housing.