Measuring System for Lift LM3
Loading
Draw-Wire Sensor B80
Measuring System for Lift LM2
January 25, 2011

Red Lion Encoders

The ZSD Sensors have open collector outputs. An open collector output brings the uncommitted collector of the encoder switching device to the external world. Because the collector element is not associated with the sensor supply voltage, the sensor output collector may be "pulled up" to external voltages (30 VDC max.) different than the encoder supply voltage. NPN open collector outputs are current sinking devices.

Weidmuller Tools

The Use of Wire End Ferrules ensures that users get electrical connections of long-lasting, consistent quality. In addition, they bring advantages during installation. The wide range of products comprises wire end ferrules with and without plastic collar, plus all the colours customers require. If required, the cable entry can also be manufactured from a not readily flammable material.

TURCK Kubler

Home   >   Products   >   Kuebler   >   Sendix   >   Draw-Wire

Kubler

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Kubler Draw Wire Type A50 Sensors Distributors
A50

Draw Wire Encoder A50

  • Insensitive to the environment Titanium-anodised aluminium housing
  • High-resistance wire Stainless steel wire
  • Wire exit free from wear Diamond-polished ceramic guide
  • Can be used in a wide temperature range without extra charge max. -20 to +85 °C
  • High traverse speed
  • High acceleration - Dynamic spring traction by means of a constant force spring, long service life,approx. 2 million complete cycles

If you are looking for Kubler Draw-Wire Encoders, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kubler Linear Measuring Systems that you are looking for at competitive prices. If you are searching for Kubler Draw-Wire Sensors technical information (data-sheets) please use the datasheets or product selection guide page links.

Kubler Draw Wire Encoders Type B80 Distributor
B80

Draw-Wire Encoder B80

  • Insensitive to the environment - Titanium-anodised aluminium housing
  • High-resistance wire Stainless steel wire
  • Wire exit free from wear - Diamond-polished ceramic guide
  • Can be used in a wide temperature range without extra charge max. -40 to +90 °C
  • Quick mounting - Fastening by means of 2 screws
  • Flexible connection possibilities - Cable, connector, radial, axial
  • Linearity up to 0.05 %
Kubler Draw Wire Type C120 Sensors Distributors
C120

Draw-Wire Encoder C120

  • Insensitive to the environment - Titanium-anodised aluminium housing
  • High-resistance wire - Stainless steel wire
  • Wire exit free from wear - Diamond-polished ceramic guide
  • Can be used in a wide temperature range without extra charge max. -40 to +90 °C
  • High traverse speed
  • High acceleration - Dynamic spring traction by means of a constant force spring, long service life,approx. 2 million complete cycles
Kubler Draw Wire Encoders Type D135 Distributor
D135

Draw-Wire Encoder D135

  • Insensitive to the environment - Titanium-anodised aluminium housing
  • High-resistance wire - Stainless steel wire
  • Wire exit free from wear - Diamond-polished ceramic guide
  • Can be used in a wide temperature range without extra charge max. -40 to +90 °C
Kubler Mini Draw Wire Encoders Incremental/Analogue Output Distributors
Miniature

Mini Draw Wire Encoder, Analog Output

  • Compact
  • Measuring length up to 2000 mm
  • Robust construction
  • Simple processing of analogue signal by means of a digital panel meter
  • Voltage or current output
  • Absolute accuracy: ±0.35 % for the whole measuring range
  • Repetition accuracy: ±0.15 mm per direction of travel
Kubler Draw Wire Mechanic Encoders Size 58 Synchro Flange & 6 mm Shaft Distributor
Draw Wire Mechanics with Encoder

Draw Wire Encoder

  • These draw wire mechanic can be combined with all encoders having a size 58 synchro flange and 6 mm shaft.
  • Possibility for user to exchange encoder
  • Measuring lengths 2800 mm or 6000 mm
  • Simple installation
Kubler Measuring System For Elevators LM2, BLM2 & ZAR Guided-Belt Encoders Distributors
Measuring System For Lift LM2

Measuring System For Elevators LM2, BLM2 & ZAR, Guided-Belt

  • System for shaft-copying, with complete mechanical kit in proven toothed belt technology.
  • A smooth-running toothed belt and a vibration-resistant encoder mounting fixture ensure quiet operation.
  • The belt pulley benefits from separate bearing supports in the mounting fixture, so protecting the installed encoder from mechanical overloading.
  • With the guided-belt system, the encoder mounting fixture and the measuring wheels are located on the elevator car.
Kubler Measuring System For Elevators LM3, BLM1 & ZAR Guided-Belt Encoders Distributor
Measuring System For Lift LM3

Measuring System For Elevators LM3, BLM1 & ZAR Guided-Belt

  • Complete System:
    • Quick, easy mounting
    • With accessories from a single source
  • Smooth-running toothed-belt system:
    • Minimal noise generation
    • Non-slip
Kubler Measuring System For Elevators LM5, BLM1 & ZAR Circumferential Encoders Distributors
Measuring System For Lift LM5

Measuring System For Elevators LM5, BLM1 & ZAR, Circumferential

  • Ideal for use in:
    • Passenger elevators
    • Freight elevators
    • Automatic storage systems
Kubler Maxi Draw Wire Sensors For Encoders Distributor
Maxi Draw Wire Mechanics

Maxi Draw Wire Mechanics

  • with the Shaft Encoders of Series 58 your benefit:
    • Direct length measurement
    • Long measuring lengths up to 40 m
    • High repeatability
    • Easy assembly
    • No additional guidance system
    • Wire guidance possible using guide pulleys
    • Distance and angle measurement are standard tasks in machine-building and

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some Kubler by TURCK Products enabling us to further assist you in finding the correct Kubler Draw-Wire Encoders for your application in the USA, Canada and Mexico. Whether we have Kubler Draw-Wire Sensors in stock in Boise, Idaho or need to get them from Kubler/TURCK; Clearwater Tech can get Kubler Draw-Wire Encoders to you fast and save money! It will be very helpful if you have the Kubler Linear Measuring Encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Kubler Draw-Wire Encoders that you are looking for in seconds. If you do not have the part numbers for Kubler Draw-Wire Sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Draw-Wire Sensor C120
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Draw-Wire Sensor D135
Miniature Draw-Wire Sensor
Draw-Wire Sensor
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX