December 23, 2009
SSAC Timers
The ASQU/ASTU Series
of 17.5 mm, knob adjustable, universal solid state timers offer multiple functions, voltages, and time delay ranges. Choose one of
5 functions and 4 time delay ranges via 4 selection switches located on top of the unit. Adjustment through the time range is
accomplished by an onboard knob. For CE approved applications, power must be removed from the unit when a switch position is
changed.
|
IDEC Timers
Interval 2 (Signal Start)
means voltage is applied to the coil at all times. When a start signal is supplied, the relay contacts transfer immediately to the
on state and the set time begins. When the set time has elapsed, the relay contacts transfer to the off state. The contacts remain
in the off state until the timer is reset. The timer is reset by applying a reset input or by removing the coil voltage.
Applicable models: GT3A-5 and GT3D-4.
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
Codix 907/908 |
Kubler Codix 907/908 LCD Preset Counters
- The Codix 908 and 907 preset counters for pulse and time inputs offer all essential counter functions at an amazing
priceperformance ratio.
- As a result of their minimal mounting depth and their plug-in screw terminals, the counters are simple and quick to
install; as an option the two-line LCD can also be backlit. It is then even easier to read it at a glance.
|
|
If you are looking for Kubler Universal Devices, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Kuebler Double Function Timers that you are looking for at competitive prices.
If you are searching for Kuebler Multifunction Device technical information (data-sheets) please use the datasheets or product
selection guide page links.
|
Codix 923 & 924 |
Kubler 923 & 924 LCD Counters/Tachometers
- Multifunction preset counter with pulse counter, position display, frequency display, tachometer, preset timer or
short time meter.
- Possibility to connect more outputs, inputs or interface-modules
- Number of digits: 2x6, Panel cut-out: DIN 48x48 mm, Protection: IP 65 front side , Count frequency: 55000 Hz, Very
fast measurement principle: Gate or time interval (HRA), Power supply: 10 to 30 VDC and 90 to 260 VAC, Outputs: Relay or
Optocoupler
- Decade keyboard, LCD-Display optional backlighted, also negative red or negative red-green backlighted
|
Codix 716/717 |
Kubler Codix 716/717 LED Preset Counter
- Display range 199 999 to 999 999 with zero blanking
- Easy to use and programmable with only 4 keys
- Option: serial interface RS 232, RS 422, RS 485
- Relay or optocoupler output
- Scaling factor 0.0001 to 99.9999
- 716: one preset
- 717: two presets
|
Codix 560 |
Kubler Codix 560 LED Preset Counter
- Counter, Tachometer, Timer and Position Display in one device
- Can be used as Preset Counter, Batch Counter or total counter
- Many different count modes
- Scalable display
- Set value
- Multi-range power supply for AC or DC
|
Type 571 |
Kubler Type 571 Counter & Large LED Displays
- Fast count input, works with our LIMES measuring system (100KHz)
- Version with 2 optocoupler outputs for alarms
- Version with analogue output, resolution 14 Bit: 0 to 10 V, +10 V to -10 V, 0 to 20 mA, 4 to 20 mA
- Version with serial interface RS232/485 for importing and exporting data
- 48 x 96 mm [1.89 x 3.78"] DIN housing, IP 65
- AC and DC supply voltage in one unit
|
Codix 52U/52P/52T/52C |
Kubler 52U/52P/52T/52C Multifunction Counters
- Codix 524: Multifunction device with position indicator, pulse counter, frequency meter and timer function. Count
frequency: 60 kHz
- Codix 52U: Multifunction device with dual functions, 2 pulse counters, pulse counter and timer, pulse and frequency
counter or 2 timers. Count frequency: 60 kHz
- Codix 52T: 2x Summing unit with shared Input Count frequency: 60 kHz
- Codix 52C: 2x Summing unit with separate Input Count frequency: 25 kHz
- Codix 52P: Position indicator and Tachometer with separate scalable inputs. Count frequency: 15 kHz (Quad mode)
|
Codix 544/54U/54P |
Kubler Codix 544/54U/54P Multifunction Counter
- Fast count input - Input frequency max. 60 kHz
- Robust housing - IP 65 protection
- LED display - Very bright, 14 mm high
- AC or DC power supply - With sensor power supply
- Inputs - As an alternative to the HTL inputs, devices with a 4 to 30 V DC input level are available, for use as parallel
displays for PLCs
|
HC 77 & SHC 77 Series |
Kubler HC 77 & SHC 77 Dual Function Counters
- Combination counter consists of hour meter and adding counter in one
- Without reset
- High shock resistance
- Magnified figures
- Protection IP 52 front side
- Data retention if power is lost
- Long service life
- UL-approval
|
HW 66/HW 66 M (MID) Series |
Kuebler HW66/HW66M Energy & Time Counters
- Metering of hours run and energy consumption in one compact device
- Wide temperature range
- Panel mounting
- Remote readout via SO outputs on request
- Shows both values in parallel
- Can also be read if no voltage present
- 2 x 6-digit easy-to-read display
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kubler Products
enabling us to further assist you in finding the correct Codix 907 & 908 counter for your application in the USA, Canada and
Mexico. Whether we have Codix 923 & 924 counter in stock in Boise, Idaho or need to get them from Kubler; Clearwater Tech can
get Kuebler universal devices to you fast and save money! It will be very helpful if you have the Codix 716 & 717 counter part
numbers ready, then our sales representatives can provide you with a pricing and availability quote for Codix 560 counter that
you are looking for in seconds. If you do not have the part numbers for 571 series counter, our application engineers will be
able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
