TURCK Kubler

Home   >   Products   >   Kuebler   >   Position   >   Displays

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Kubler Codix 133 LCD Position Displays

• Low-price and high efficiency
• Large 8-digit LCD display, height of the figures 8 mm [0.315"]
• Optional backlighting
• Counting modes include phase discriminator (quadrature) counting (also with pulse doubling) for connection to Incremental Encoders
• Unified Codix design, matches the extensive Codix family
• IP 65

If you are looking for Kubler Position Displays, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kuebler Electronic Display that you are looking for at competitive prices. If you are searching for Kubler LCD Displays technical information (data-sheets) please use the datasheets or product selection guide page links.

Kubler Codix 521/524/52P Position Displays

• Codix 521: Position indicator with multiplying and dividing factor, set value and faster speed. Count frequency: 25 kHz (Quad mode)
• Codix 524: Combination device with position indicator, pulse counter, frequency meter and timer function. Count frequency: 25 kHz (Quad mode), Phasendiskriminator
• Codix 52P: Position indicator and Tachometer with separate scalable inputs. Count frequency: 15 kHz (Quad mode)
• Number of digits: 6, Inputs: NPN/PNP
• Panel cut-out: DIN 48x24 mm
• Protection: IP 65 front side
• Power supply: 10 to 30 VDC

Kubler 541/544/54P Counters & Displays

• Codix 541: Position indicator with multiplying and dividing factor, set value and faster speed. Count frequency: max. 25 kHz (Quad mode), quadrature input (phase discrimination)
• Codix 544: Multifunction as timer, tachometer, pulse counter, timer, position display. Count frequency: max. 25 kHz (Quad mode), quadrature input (phase discrimination)
• Codix 54P: Tachometer and position display with separate inputs. Count frequency: max. 15 kHz (Quad mode)

Kubler Codix 538 LED CAN Position Displays

• LED display Very bright, 8 mm high
• Floating decimal point, up to 5 places
• Factor + Offset
• Protection IP65 from the front
• Reverse polarity protection
• Read-in value can be scaled using factor and offset
• CAN specification 2.0A/2.0B & CANopen compliant

Kubler 923 & 924 Position Preset Counters

• Multifunction preset counter with pulse counter, position display, frequency display, tachometer, preset timer or short time meter.
• Possibility to connect more outputs, inputs or interface-modules
• Number of digits: 2x6, Panel cut-out: DIN 48x48 mm, Protection: IP 65 front side , Count frequency: 55000 Hz, Very fast measurement principle: Gate or time interval (HRA), Power supply: 10 to 30 VDC and 90 to 260 VAC, Outputs: Relay or Optocoupler
• Decade keyboard, LCD-Display optional backlighted, also negative red or negative red-green backlighted

Kubler Type 570 LED SSI Position Displays

• AC and DC supply voltage in one unit
• Master or slave mode
• Plug-in screw terminals
• SSI-clock frequency from 100 Hz up to 1 MHz
• Display and outputs may be adjusted using scaling- and offset-features
• Large 15 mm [0.591"] high LED-display, 6-digit, with adjustable brightness

Kubler Codix 560 LED Preset Counter

• Counter, Tachometer, Timer and Position Display in one device
• Can be used as Preset Counter, Batch Counter or total counter
• Many different count modes
• Scalable display
• Set value
• Multi-range power supply for AC or DC

Kubler Type 571 Counter & Large LED Displays

• Fast count input, works with our LIMES measuring system (100KHz)
• Version with 2 optocoupler outputs for alarms
• Version with analogue output, resolution 14 Bit: 0 to 10 V, +10 V to -10 V, 0 to 20 mA, 4 to 20 mA
• Version with serial interface RS232/485 for importing and exporting data
• 48 x 96 mm [1.89 x 3.78"] DIN housing, IP 65
• AC and DC supply voltage in one unit

Kubler Type 572 LED Preset Counter

• 2 separate freely scalable count inputs - HTL or TTL; Both also with inverted inputs, max. input frequency 1 MHz/ channel
• Very bright LED display 15 mm high (6 digit) and 10 mm high (8 digit)
• 4 freely programmable fast solid-state outputs, each with 350 mA output current
• Step or tracking preset
• Simple programming - with function codes, dependent on the operating mode selected
• With 8 different permanent count functions, such as simple count, difference count and total count of both inputs, batch counters etc.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kuebler Products enabling us to further assist you in finding the correct Codix 538 display for your application in the USA, Canada and Mexico. Whether we have 923 & 924 series displays in stock in Boise, Idaho or need to get them from Kuebler; Clearwater Tech can get type 570 display to you fast and save money! It will be very helpful if you have the Codix 560 counter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for type 571 counter that you are looking for in seconds. If you do not have the part numbers for type 572 counter, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.