TURCK Kubler

Home   >   Products   >   Kuebler   >   Preset   >   Counters

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Kubler Type 901 LCD Preset Counter

• No power supply necessary (batteryoperated)
• Data security, thanks to exchangeable lithium batteries, life time minimum 8 years
• Easy programming
• Simple preset entry: one key per decade
• Output - Relay, programmable normally open or normally closed
• 2 line LCD display count, preset and level of the relay output

If you are looking for Kubler Preset Counters, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kubler Difference Counters that you are looking for at competitive prices. If you are searching for Kuebler Preset Multifunction Counter technical information (data-sheets) please use the datasheets or product selection guide page links.

Kubler Type 903/904 Preset Electronic Counter

• Display range -199 999 to 999 999 with zero blanking
• Easy to operate and set the preset values via 4 keys
• Relay or optocoupler-output
• Scaling factor 0.0001 to 9.9999
• 2 line LCD display
• Programmable as impulse counter, frequency meter or time meter with sign and zero blanking
• Power supply 90 to 260 V AC or 10 to 30 V DC

Kubler Codix 907/908 LCD Preset Counter

• The Codix 908 and 907 preset counters for pulse and time inputs offer all essential counter functions at an amazing priceperformance ratio.
• As a result of their minimal mounting depth and their plug-in screw terminals, the counters are simple and quick to install; as an option the two-line LCD can also be backlit. It is then even easier to read it at a glance.

Kubler 923 & 924 LCD Counters/Tachometers

• Multifunction preset counter with pulse counter, position display, frequency display, tachometer, preset timer or short time meter.
• Possibility to connect more outputs, inputs or interface-modules
• Number of digits: 2x6, Panel cut-out: DIN 48x48 mm, Protection: IP 65 front side , Count frequency: 55000 Hz, Very fast measurement principle: Gate or time interval (HRA), Power supply: 10 to 30 VDC and 90 to 260 VAC, Outputs: Relay or Optocoupler
• Decade keyboard, LCD-Display optional backlighted, also negative red or negative red-green backlighted

Kubler Codix 716/717 LED Preset Counter

• Display range 199 999 to 999 999 with zero blanking
• Easy to use and programmable with only 4 keys
• Option: serial interface RS 232, RS 422, RS 485
• Relay or optocoupler output
• Scaling factor 0.0001 to 99.9999
• 716: one preset
• 717: two presets

Kubler Codix 560 LED Preset Counter

• Counter, Tachometer, Timer and Position Display in one device
• Can be used as Preset Counter, Batch Counter or total counter
• Many different count modes
• Scalable display
• Set value
• Multi-range power supply for AC or DC

Kubler Type 571 Counter & Large LED Displays

• Fast count input, works with our LIMES measuring system (100KHz)
• Version with 2 optocoupler outputs for alarms
• Version with analogue output, resolution 14 Bit: 0 to 10 V, +10 V to -10 V, 0 to 20 mA, 4 to 20 mA
• Version with serial interface RS232/485 for importing and exporting data
• 48 x 96 mm [1.89 x 3.78"] DIN housing, IP 65
• AC and DC supply voltage in one unit

Kubler Type 572 LED Preset Counter

• 2 separate freely scalable count inputs - HTL or TTL; Both also with inverted inputs, max. input frequency 1 MHz/ channel
• Very bright LED display 15 mm high (6 digit) and 10 mm high (8 digit)
• 4 freely programmable fast solid-state outputs, each with 350 mA output current
• Step or tracking preset
• Simple programming - with function codes, dependent on the operating mode selected
• With 8 different permanent count functions, such as simple count, difference count and total count of both inputs, batch counters etc.

Kubler BVa 15 / MVs 13 / MVs 16 Counter

• 3 or 5-digit adding preset counter with stationary preset value
• Preset constantly visible
• 0-reset manual
• Potential free changeover contact (microswitch) on reaching the preset. Contact remains switched till a 0-reset occurs
• Counter without front bezel fits into front frame F2B and may be combined in blocks of 50 x 50 mm [1.969 x 1.969"]
• Can be combined with the counter series BVs, MVs 36 and HVa.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kubler Products enabling us to further assist you in finding the correct Codix 923 & 924 counter for your application in the USA, Canada and Mexico. Whether we have Codix 716 & 717 counters in stock in Boise, Idaho or need to get them from Kubler; Clearwater Tech can get Codix 560 counter to you fast and save money! It will be very helpful if you have the type 571 counter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 572 series counter that you are looking for in seconds. If you do not have the part numbers for BVa 15 MVs 13 MVs 16 counter, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.