Kubler

Home   >   Products   >   Kuebler   >   Process   >   Controllers

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Codix 553 Process Controller 5 Digits & Optional Interface

• Programmable input characteristic curve with up to 24 control points
• MIN/MAX value acquisition and data backup in case of Power Off
• Display-Hold or reset input for the limit values
• Very big keys for use with gloves
• Input for key-lock
• Very bright display
• Input range 0 to 20 mA, 4 to 20 mA; 0 to 10 V 2 to 10 V; +10 V
• Outputs - 2 limit values with programmable hysteresis and programmable signal behaviour, relays with change-over contact or optocoupler

If you are looking for Kubler Process Controllers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kuebler Codix 553 Controller that you are looking for at competitive prices. If you are searching for Kuebler Codix 555 Controller technical information (data-sheets) please use the datasheets or product selection guide page links.

Codix 566 Controller Strain-Gauge Inputs

The Codix 566 Process Controller with Totaliser function displays measured values from all common strain-gauge inputs in high resolution. In addition it can monitor and control 2 limit values.

These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to-understand running Help Texts and a practical Quick-start Guide eliminate the need to wade through time-consuming full instruction manuals.

Codix 565 Process Controller 6 Digits with Totaliser

The Codix 565 Process Controller with Totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values.

These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to-understand running Help Texts and a practical Quick-start Guide eliminate the need to wade through time-consuming full instruction manuals.

Codix 555 Process Controller 5 Digits with Totaliser & Optional Interface

• Programmable input characteristic curve with up to 24 control points
• Totaliser for integration (totalisation) of the measured values (e.g. flow rate measurement => liquid level) with own scaling and programmable input threshold
• MIN/MAX value
• Display-Hold or reset input for the integration function (totaliser) or for the limit values
• Very big keys for use with gloves
• Input for key-lock
• Very bright display
• Auxiliary power supply output for measuring transducer/sensor

Type 573 Multifunction Process Controller 6 Digit & 2 Inputs

• 2 separate freely scalable analogue inputs +/-10 V, 0 to 10 V and 0/4 to 20 mA, Resolution 14 bit
• Tare function - the unit can be set to 0 for any input voltage
• Programmable linearization: with up to 16 control points, input via key-pad or via the Teach-In function
• Averaging measurement over 2 to 16 measuring cycles, for use with serious fluctuations of the input signals
• Easy to programme - the desired display value is simply keyed-in for a specific input signal
• Fast 25 ms sampling rate per channel alternating
• Up to 3 display values in one device, display A, display B + display calculated based on A and B
• AC and DC supply voltages in one device
• Simple menu-driven programming with just 2 keys, as well as Tare or Teach-In key

Kubler Codix 850/851 Process & Temperature Controllers

• Multifunctional, i.e. all usual measuring signals can be connected directly (voltage, current, thermocouples, resistance thermometers, resistance)
• Flexible limit value monitoring (2 limit values)
• HART communication socket for setting parameters
• LCD display & keys for on-site operation for Model 851
• Programmable input characteristic curve with up to 32 control points
• Programmable via PC or keys
• Integrated measuring transducer power supply
• RS232 interface for parameter setting and measured values output
• Analog output with scale factor for current or voltage of the linearised input

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kubler Products enabling us to further assist you in finding the correct Codix 553 controller for your application in the USA, Canada and Mexico. Whether we have Codix 555 controller in stock in Boise, Idaho or need to get them from Kubler; Clearwater Tech can get type 573 controller to you fast and save money! It will be very helpful if you have the Codix 565 controller part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Codix 553 controller that you are looking for in seconds. If you do not have the part numbers for Codix 555 controller, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.